Floor Model Lathes

  • Layout
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894329 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894329
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $49,529.80
$39,891
As low as $789.44/mo
View Details
Jet EVS-949 Mill with ACU-RITE 203 DRO and X, Y, Z-Axis Powerfeeds and Air Powered Draw Bar 894315 at Elite Metal Tools
Jet EVS-949 Mill with ACU-RITE 203 DRO and X, Y, Z-Axis Powerfeeds and Air Powered Draw Bar 894315
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,840.53
$38,939
As low as $770.60/mo
View Details
Jet ETM-949 Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894040 at Elite Metal Tools
Jet ETM-949 Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894040
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $74,869.07
$58,509
As low as $1,157.89/mo
View Details
Knuth 10.1HP 76” Variable Speed Turnado 280/2000 V Universal Lathe with Constant Cutting Speed 320573 at Elite Metal Tools
Knuth 10.1HP 76” Variable Speed Turnado 280/2000 V Universal Lathe with Constant Cutting Speed 320573
  • Center height: 11”
  • Workpiece length (max.): 76”
  • Turning-Ø over support: 14”
  • Gap bridge length: 7”
$42,161.11
As low as $834.36/mo
View Details
Knuth 7.4HP 39” Turnado 230/1000 Lead Screw and Feed Shaft Lathe 320555 at Elite Metal Tools
Knuth 7.4HP 39” Turnado 230/1000 Lead Screw and Feed Shaft Lathe 320555
  • Center height: 9”
  • Turning-Ø over support: 9”
  • Gap bridge length: 6”
  • Spindle mount: Camlock D1-6
$28,412.50
As low as $562.28/mo
View Details
Knuth 40.2HP 118” DL E Heavy 1000/3000 Universal Heavy-Duty Lathe 300519 at Elite Metal Tools
Knuth 40.2HP 118” DL E Heavy 1000/3000 Universal Heavy-Duty Lathe 300519
  • Workpiece length (max.): 118”
  • Workpiece weight (max.): 22,000 lbs.
  • Turning diameter over bed: 79”
  • Turning-Ø over support: 63”
$292,135.39
As low as $5,781.35/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894349 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894349
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,651.45
$39,246
As low as $776.67/mo
View Details
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO 323374 at Elite Metal Tools
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO 323374
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $35,137.07
$28,159
As low as $557.26/mo
View Details
Acra Variable Speed Lathe 14X60TVS at Elite Metal Tools
Acra Variable Speed Lathe 14X60TVS
  • Spindle RPM: 20-2500 (Variable Speeds) 
  • Swing Over Bed: 14 3/16"
  • Spindle Bore: 2 1/16"
  • Main Motor: 5 HP
$29,747.30
As low as $588.69/mo
View Details
Knuth 29.5HP 197” DL E Heavy 800/5000 Universal Heavy-Duty Lathe 300514 at Elite Metal Tools
Knuth 29.5HP 197” DL E Heavy 800/5000 Universal Heavy-Duty Lathe 300514
  • Workpiece length (max.): 197”
  • Workpiece weight (max.): 13,200 lbs.
  • Turning diameter over bed: 63”
  • Turning-Ø over support: 50”
$263,118.78
As low as $5,207.12/mo
View Details
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300 at Elite Metal Tools
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,812.80
$28,655
As low as $567.08/mo
View Details
Jet GH-1440-3 Lathe with Taper Attachment and Collet Closer 323402 at Elite Metal Tools
Jet GH-1440-3 Lathe with Taper Attachment and Collet Closer 323402
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $40,407.72
$32,032
As low as $633.91/mo
View Details
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894306 at Elite Metal Tools
Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894306
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,353.72
$32,727
As low as $647.66/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and Servo X-Axis Powerfeed 894399 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and Servo X-Axis Powerfeed 894399
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,515.99
$34,315
As low as $679.09/mo
View Details
Jet BDB-1340A With Collet Closer 321111 at Elite Metal Tools
Jet BDB-1340A With Collet Closer 321111
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
MSRP: $17,838.80
$13,976
As low as $454.22/mo
View Details
Knuth 29.5HP 39” VDM 1250 S Vertical Lathe 301392 at Elite Metal Tools
Knuth 29.5HP 39” VDM 1250 S Vertical Lathe 301392
  • Workpiece length (max.): 39”
  • Workpiece weight (max.): 7,040 lbs.
  • Speed range: 6.3 rpm - 200 rpm
  • Rotating diameter (max.): 49”
$219,618.94
As low as $4,346.25/mo
View Details
Jet GH-1440B with Acu-Rite 203 DRO 323440 at Elite Metal Tools
Jet GH-1440B with Acu-Rite 203 DRO 323440
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $26,352.80
$20,886
As low as $413.33/mo
View Details
Acra 3200 SET High Speed Precision Engine Lathe 32X80SET at Elite Metal Tools
Acra 3200 SET High Speed Precision Engine Lathe 32X80SET
  • Distance Between Centers 80"
  • Spindle Bore: 6.02"
  • Swing In Gap: 43.30"
  • Swing Over Bed: 32.67"
$80,588.20
As low as $1,594.84/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Collet Closer, 3HP 311449 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Collet Closer, 3HP 311449
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $31,353.07
$25,379
As low as $502.25/mo
View Details
Jet EGH-1740 With Newall DP700 DRO With Taper Attachment 892512 at Elite Metal Tools
Jet EGH-1740 With Newall DP700 DRO With Taper Attachment 892512
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $62,571.07
$49,473
As low as $979.07/mo
View Details
Jet GH-1440-3 Lathe with Taper Attachment 323401 at Elite Metal Tools
Jet GH-1440-3 Lathe with Taper Attachment 323401
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $35,407.45
$28,358
As low as $561.20/mo
View Details
Jet GHB-1340A With Newall DP700 DRO 321131 at Elite Metal Tools
Jet GHB-1340A With Newall DP700 DRO 321131
  • 6" 3 jaw direct mount chuck with top reversing jaws
  • Compound and cross slide have backlash elimination
  • Gear box gives wide inch threading and feed capabilities with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $19,920
$15,657
As low as $309.85/mo
View Details
Knuth 7.4HP 56” Turnado 280/1500 Lead Screw and Feed Shaft Lathe 320559 at Elite Metal Tools
Knuth 7.4HP 56” Turnado 280/1500 Lead Screw and Feed Shaft Lathe 320559
  • Center height: 11”
  • Turning-Ø over support: 14”
  • Gap bridge length: 7”
  • Spindle mount: Camlock D1-8
$36,056.39
As low as $713.55/mo
View Details
Knuth 29.5HP 197” DL E Heavy 620/5000 Universal Heavy-Duty Lathe 300508 at Elite Metal Tools
Knuth 29.5HP 197” DL E Heavy 620/5000 Universal Heavy-Duty Lathe 300508
  • Workpiece length (max.): 197”
  • Workpiece weight (max.): 13,200 lbs.
  • Turning diameter over bed: 49”
  • Turning-Ø over support: 35”
$196,803.40
As low as $3,894.73/mo
View Details