Floor Model Lathes

  • Swing Over Bed: 14 3/16"
  • Swing In Gap: 21"
  • Main Motor: 5 HP
  • Voltage: 220/440V AC / 3 PH
$21,107.90
As low as $417.72/mo
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $61,895.45
$48,215
As low as $954.17/mo
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Mounted on stand with foot pedal, coolant and ready to use
MSRP: $22,433.72
$17,232.60
As low as $341.03/mo
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $32,434.26
$25,766
As low as $509.90/mo
  • Spindle Nose Diameter: 2 3/16"
  • Spindle RPM (Variable): 0 ~ 4000 RPM
  • Distance Between Center: 15"
  • Swing Over Bed: 9"
$21,769
As low as $430.80/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,029.45
$32,707
As low as $647.27/mo
  • Center height: 11”
  • Turning-Ø over support: 14”
  • Gap bridge length: 7”
  • Spindle mount: Camlock D1-8
$39,595
As low as $783.58/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,002.26
$31,241
As low as $618.25/mo
  • Workpiece length (max.): 315”
  • Workpiece weight (max.): 22,000 lbs.
  • Turning diameter over bed: 79”
  • Turning-Ø over support: 63”
$371,495
As low as $7,351.88/mo
  • Swing Over Bed 26"
  • Distance Between Centers 60"
  • Voltage 220 / 440V AC / 3 PH
  • Spindle Speeds 13-1200 RPM
$49,351.50
As low as $976.66/mo
  • Spindle Bore: 2 3/16"
  • Swing In Gap: 24" 
  • Swing Over Bed: 15 1/4"
  • Spindle RPM: 25-2000 (16 Speeds)
$33,460.90
As low as $662.19/mo
  • Swing Over Bed: 22”
  • Distance Between Centers: 60”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 220V, 15 HP
$60,342.41
As low as $1,194.17/mo
  • Swing Over Bed: 22”
  • Distance Between Centers: 100”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 230V, 15 HP
$73,570.03
As low as $1,455.95/mo
  • Spindle RPM: 36-1800 (12 Speeds)
  • Spindle Bore: 2 1/16"
  • Swing In Gap: 23"
  • Main Motor: 5 HP
$26,317.50
As low as $520.82/mo
  • Center height: 7”
  • Turning-Ø over support: 9”
  • Bed width: 7”
  • Center width: 39.37”
$22,495
As low as $445.17/mo
  • Center height: 9”
  • Turning-Ø over support: 9”
  • Gap bridge length: 6”
  • Spindle mount: Camlock D1-6
$32,995
As low as $652.97/mo
  • Swing Over Bed: 22"
  • Distance Between Centers: 80"
  • Spindle Taper: MT7
  • Spindle Bore: 4-1/8"
MSRP: $48,334
$42,647.42
As low as $843.99/mo
  • Workpiece length (max.): 53”
  • Workpiece weight (max.): 17,600 lbs.
  • Speed range: 3.2 rpm - 100 rpm
  • Rotating diameter (max.): 91”
$274,995
As low as $5,442.15/mo
  • Swing Over Bed: 17"
  • Swing Over Cross Slide: 10 3/4"
  • Spindle Bore: 2 1/4"
  • Spindle RPM: 35-2000 (12 Speeds) 
$30,717.50
As low as $607.89/mo
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $63,652.26
$49,486
As low as $979.32/mo
  • Spindle Taper: MT 5
  • Number of Spindle Speeds: 8 or 16
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-4
MSRP: $21,666
$19,117.28
As low as $378.33/mo
  • Total Length Of Bed: 60"
  • Spindle Nose Mounting: Camlock D1-4
  • Spindle Bore: 1-9/16"
  • Max. Size Cutting Tool: 1/2"
MSRP: $21,053
$19,814.25
As low as $392.12/mo
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $27,569.07
$21,395
As low as $423.40/mo
  • Center height: 9”
  • Turning-Ø over support: 9”
  • Gap bridge length: 6”
  • Spindle mount: Camlock D1-6
$40,195
As low as $795.45/mo