Floor Model Lathes

Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds 894326

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$43,786.26~~

$34,514

As low as $683.03/mo

View Details

Jet EGH-1740 With Taper Attachment and Collet Closer 892502

4-Position Carriage Stop
Anti-Float design eliminates backlash in the cross slide
Enclosed coolant system contains excess coolant for increased safety
Front facing chip pan allows easy chip removal from the front of the machine
Full Length Splash Guard

MSRP: ~~$59,597.99~~

$47,289

As low as $935.84/mo

View Details

Palmgren 2HP 460V Three Phase 14” x 40” Engine Lathe with 2” Bore 9684552

Spindle Taper: MT 5
Number of Spindle Speeds: 8 or 16
Spindle Speed: 70 - 2000 RPM
Spindle Seat: Camlock D1-4

MSRP: ~~$21,666~~

$19,117.28

As low as $378.33/mo

View Details

Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894416

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$54,057.07~~

$43,218

As low as $855.28/mo

View Details

Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894328

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$45,678.26~~

$35,904

As low as $710.54/mo

View Details

Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894343

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$50,678.53~~

$40,735

As low as $806.14/mo

View Details

Jet GH-1440-1 Lathe with Collet Closer 323372

Compound and cross slide have backlash elimination
Front Removable Chip Tray
Full Length Splash Guard
Inch-metric dials are standard
Independent lead screw and feed rod

MSRP: ~~$31,758.53~~

$25,675

As low as $508.10/mo

View Details

Jet GHB-1340A Lathe With Newall NMS300 DRO With Taper Attachment 323115

6" 3-jaw direct mount chuck with top reversing jaw
Compound and cross slide have backlash elimination
Fast, easy speed changes
Hardened and ground gears are featured in the headstock and gearbox
Image shown with optional bench, p/n 321443AK

MSRP: ~~$23,420.20~~

$18,732

As low as $370.70/mo

View Details

Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894329

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$49,529.80~~

$39,891

As low as $789.44/mo

View Details

Jet ETM-949 Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894040

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$74,869.07~~

$58,509

As low as $1,157.89/mo

View Details

Jet EVS-949 Mill with ACU-RITE 203 DRO and X, Y, Z-Axis Powerfeeds and Air Powered Draw Bar 894315

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$47,840.53~~

$38,939

As low as $770.60/mo

View Details

Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894349

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$48,651.45~~

$39,246

As low as $776.67/mo

View Details

Jet EVS-949 Mill with X-Axis JET Powerfeed 894300

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$35,812.80~~

$28,655

As low as $567.08/mo

View Details

Jet GH-1440-1 Lathe with Acu-Rite 203 DRO 323374

Compound and cross slide have backlash elimination
Front Removable Chip Tray
Full Length Splash Guard
Inch-metric dials are standard
Independent lead screw and feed rod

MSRP: ~~$35,137.07~~

$28,159

As low as $557.26/mo

View Details

Acra Variable Speed Lathe 14X60TVS

Spindle RPM: 20-2500 (Variable Speeds)
Swing Over Bed: 14 3/16"
Spindle Bore: 2 1/16"
Main Motor: 5 HP

$29,747.30

As low as $588.69/mo

View Details

Jet GH-1440-3 Lathe with Taper Attachment and Collet Closer 323402

Compound and cross slide have backlash elimination
Front Removable Chip Tray
Full Length Splash Guard
Inch-metric dials are standard
Independent lead screw and feed rod

MSRP: ~~$40,407.72~~

$32,032

As low as $633.91/mo

View Details

Jet EVS-949 Mill with X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894306

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$41,353.72~~

$32,727

As low as $647.66/mo

View Details

Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and Servo X-Axis Powerfeed 894399

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$43,515.99~~

$34,315

As low as $679.09/mo

View Details

Jet BDB-1340A With Collet Closer 321111

6" 3-jaw direct mount scroll chuck with top reversing jaws
Automatic feeding and threading are fully interlocked
Carriage mounted spindle control lever
Centers and headstock center sleeves
Feed selectors travel in grooved ways

MSRP: ~~$17,838.80~~

$13,976

As low as $454.22/mo

View Details

Jet EGH-1740 With Newall DP700 DRO With Taper Attachment 892512

4-Position Carriage Stop
Anti-Float design eliminates backlash in the cross slide
Enclosed coolant system contains excess coolant for increased safety
Front facing chip pan allows easy chip removal from the front of the machine
Full Length Splash Guard

MSRP: ~~$62,571.07~~

$49,473

As low as $979.07/mo

View Details

Jet GH-1440B with Acu-Rite 203 DRO 323440

Compound and cross slide have backlash adjustment
Emergency stop within easy reach of the Operator
Enclosed gearbox design provides smooth, quiet operation
Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
Spindle Spider available for ease of turning Gun barrels

MSRP: ~~$26,352.80~~

$20,886

As low as $413.33/mo

View Details