Floor Model Lathes

  • Layout
Jet BDB-1340A With CBS-1340A Stand 321102AK at Elite Metal Tools
Jet BDB-1340A With CBS-1340A Stand 321102AK
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
$12,211.43
$9,979.00
As low as $324/mo
View Details
Acra Precision Lathe 16X60TE at Elite Metal Tools
Acra Precision Lathe 16X60TE
  • Spindle RPM: 36-1800 (12 Speeds)
  • Spindle Bore: 2 1/16"
  • Swing In Gap: 23"
  • Main Motor: 5 HP
$23,925.00
As low as $473/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO 892503 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO 892503
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$49,561.43
$40,559.00
As low as $802/mo
View Details
Jet GHB-1340A With ACU-RITE 203 DRO 321122 at Elite Metal Tools
Jet GHB-1340A With ACU-RITE 203 DRO 321122
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash adjustment
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$15,647.99
$12,679.00
As low as $412/mo
View Details
Acra Second Operation Toolmakers Lathe ATS27EVS at Elite Metal Tools
Acra Second Operation Toolmakers Lathe ATS27EVS
  • Spindle Nose Diameter: 2 3/16"
  • Swing Over Bed: 9"
  • Spindle RPM (Variable): 0 ~ 4000 RPM
  • Tailstock Spindle Travel: 3 3/4"
$19,790.00
As low as $391/mo
View Details
Palmgren 2HP 230V Three Phase 13” x 40” Engine Lathe with 2” Bore 9684550 at Elite Metal Tools
Palmgren 2HP 230V Three Phase 13” x 40” Engine Lathe with 2” Bore 9684550
  • Spindle Taper: MT 6
  • Number of Spindle Speeds: 8
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-5
$11,867.00
$11,125.31
As low as $361/mo
View Details
Jet ETM-949EVS Mill With 3-Axis ACU-RITE MILLPWR G2 CNC 894091 at Elite Metal Tools
Jet ETM-949EVS Mill With 3-Axis ACU-RITE MILLPWR G2 CNC 894091
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$76,316.59
$59,729.00
As low as $1,182/mo
View Details
Jet GHB-1340A Lathe With Newall NMS300 DRO With Collet Closer 323581 at Elite Metal Tools
Jet GHB-1340A Lathe With Newall NMS300 DRO With Collet Closer 323581
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$18,721.99
$15,369.00
As low as $304/mo
View Details
Jet GH-1440-1 Lathe with Newall NMS300 DRO 323386 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall NMS300 DRO 323386
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$23,531.43
$19,289.00
As low as $381/mo
View Details
Jet BDB-1340A, With Taper Attachment and Collet Closer 321112 at Elite Metal Tools
Jet BDB-1340A, With Taper Attachment and Collet Closer 321112
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
$15,842.86
$12,849.00
As low as $417/mo
View Details
Acra Variable Speed Lathe 16X40TVS at Elite Metal Tools
Acra Variable Speed Lathe 16X40TVS
  • Spindle Bore: 2 1/16"
  • Swing Over Bed: 16 3/16" 
  • Swing Over Cross Slide: 10 3/8"
  • Voltage: 220V AC / 1 PH / 3PH
$25,290.00
As low as $500/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and Servo X-Axis Powerfeed 894399 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and Servo X-Axis Powerfeed 894399
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$37,285.71
$30,349.00
As low as $600/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Collet Closer, 3HP 311446 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Collet Closer, 3HP 311446
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
$25,444.99
$20,799.00
As low as $411/mo
View Details
Palmgren 2HP 230V Three Phase 14” x 40” Engine Lathe with 2” Bore 9684551 at Elite Metal Tools
Palmgren 2HP 230V Three Phase 14” x 40” Engine Lathe with 2” Bore 9684551
  • Spindle Taper: MT 5
  • Number of Spindle Speeds: 8 or 16
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-4
$17,333.00
$16,249.68
As low as $321/mo
View Details
Jet EVS-949 Mill with USA Air Powered Draw Bar 894375 at Elite Metal Tools
Jet EVS-949 Mill with USA Air Powered Draw Bar 894375
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$31,560.57
$25,689.00
As low as $508/mo
View Details
Jet GH-1440B with Newall NMS300 323446 at Elite Metal Tools
Jet GH-1440B with Newall NMS300 323446
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
$19,532.86
$15,899.00
As low as $314/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO, Taper Attachment & Collet Closer,3HP 311451 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO, Taper Attachment & Collet Closer,3HP 311451
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
$29,757.14
$24,159.00
As low as $478/mo
View Details
Jet GH-1440-3 Lathe with Taper Attachment 323401 at Elite Metal Tools
Jet GH-1440-3 Lathe with Taper Attachment 323401
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$25,781.99
$20,879.00
As low as $413/mo
View Details
Jet ETM-949EVS, Elite 9x49 Electronic Variable Speed Mill 230V, 3Ph 894050 at Elite Metal Tools
Jet ETM-949EVS, Elite 9x49 Electronic Variable Speed Mill 230V, 3Ph 894050
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$29,115.91
$23,699.00
As low as $469/mo
View Details
Jet BDB-1340A With Collet Closer 321111 at Elite Metal Tools
Jet BDB-1340A With Collet Closer 321111
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
$14,011.99
$11,519.00
As low as $374/mo
View Details
Jet GH-1440-3 Lathe with Collet Closer 323400 at Elite Metal Tools
Jet GH-1440-3 Lathe with Collet Closer 323400
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$23,304.29
$18,799.00
As low as $372/mo
View Details
Jet GHB-1340A With Newall DP700 DRO 321131 at Elite Metal Tools
Jet GHB-1340A With Newall DP700 DRO 321131
  • 6" 3 jaw direct mount chuck with top reversing jaws
  • Compound and cross slide have backlash elimination
  • Gear box gives wide inch threading and feed capabilities with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$15,803.99
$12,929.00
As low as $420/mo
View Details
Acra 1700 ACH Precision Engine Lathe 17X67ACH at Elite Metal Tools
Acra 1700 ACH Precision Engine Lathe 17X67ACH
  • Swing Over Bed: 17"
  • Swing Over Cross Slide: 10 3/4"
  • Spindle Bore: 2 1/4"
  • Spindle RPM: 35-2000 (12 Speeds) 
$27,925.00
As low as $552/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X-Axis Powerfeed 894405 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X-Axis Powerfeed 894405
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$38,723.14
$31,519.00
As low as $623/mo
View Details