Floor Model Lathes

  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $21,068.57
$17,259
As low as $341.55/mo
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $25,444.99
$20,799
As low as $411.61/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $76,316.59
$59,729
As low as $1,182.03/mo
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $19,532.86
$15,899
As low as $314.64/mo
  • Workpiece length (max.): 39”
  • Workpiece weight (max.): 11,000 lbs.
  • Speed range-stages: 16
  • Speed range: 5 rpm - 160 rpm
$248,438.07
As low as $4,916.58/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,054.57
$27,719
As low as $548.55/mo
  • Center height: 9”
  • Turning-Ø over support: 9”
  • Gap bridge length: 6”
  • Spindle mount: Camlock D1-6
$28,412.50
As low as $562.28/mo
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $18,688.57
$15,199
As low as $300.78/mo
  • Workpiece length (max.): 118”
  • Turning diameter over bed: 26”
  • Turning-Ø over support: 17”
  • Turning diameter without gap bridge: 35”
$54,102.22
As low as $1,070.68/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $33,317.43
$27,119
As low as $536.68/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,062
$28,539
As low as $564.78/mo
  • Workpiece length (max.): 118”
  • Workpiece weight (max.): 22,000 lbs.
  • Turning diameter over bed: 79”
  • Turning-Ø over support: 63”
$292,135.39
As low as $5,781.35/mo
  • Spindle Taper: MT 5
  • Number of Spindle Speeds: 8 or 16
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-4
MSRP: $17,333
$16,249.69
As low as $321.58/mo
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $27,524.29
$22,599
As low as $447.23/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,376.86
$33,679
As low as $666.50/mo
  • Workpiece length (max.): 39”
  • Workpiece weight (max.): 7,040 lbs.
  • Speed range: 6.3 rpm - 200 rpm
  • Rotating diameter (max.): 49”
$219,618.94
As low as $4,346.25/mo
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $49,300
$40,359
As low as $798.70/mo
  • Center height: 11”
  • Workpiece length (max.): 76”
  • Turning-Ø over support: 14”
  • Gap bridge length: 7”
$42,161.11
As low as $834.36/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,971.14
$29,279
As low as $579.43/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,054.57
$27,719
As low as $548.55/mo
  • Center height: 9”
  • Workpiece length (max.): 79”
  • Turning-Ø over support: 9”
  • Gap bridge length: 6”
$37,239.72
As low as $736.97/mo
  • Center height: 11”
  • Turning-Ø over support: 14”
  • Gap bridge length: 7”
  • Spindle mount: Camlock D1-8
$36,056.39
As low as $713.55/mo
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $25,781.99
$20,879
As low as $413.19/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $37,285.71
$30,349
As low as $600.60/mo