Floor Model Lathes

  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Mounted on stand with foot pedal, coolant and ready to use
MSRP: $22,433.72
$17,233
As low as $341.04/mo
  • Swing Over Bed: 24”
  • Distance Between Centers: 80”
  • Spindle Speed: 18 Speeds (10-1,200 RPM)
  • Motor: 220V, 15 HP
$101,194.25
As low as $2,002.63/mo
  • Swing Over Bed: 24”
  • Distance Between Centers: 120”
  • Spindle Speed: 18 Speeds (10-1,200 RPM)
  • Motor: 220V, 15 HP
$113,499.25
As low as $2,246.15/mo
  • Swing Over Bed: 24”
  • Distance Between Centers: 160”
  • Spindle Speed: 18 Speeds (10-1,200 RPM)
  • Motor: 220V, 15 HP
$121,319.25
As low as $2,400.90/mo
  • Swing Over Bed: 22”
  • Distance Between Centers: 40”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 220V, 15 HP
$57,132.29
As low as $1,130.64/mo
  • Swing Over Bed: 22”
  • Distance Between Centers: 80”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 230V, 15 HP
$61,725.20
As low as $1,221.54/mo
  • Capacity: 20" Swing Over Bed, 80" Between Centers
  • 12-Step Spindle Speed
  • 12"-Three-Jaw Chuch
  • Mitutoyo 2-Axis DRO - Standard
MSRP: $70,003.99
$54,995
As low as $1,088.35/mo
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $55,678.80
$43,719
As low as $865.19/mo
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $58,651.99
$45,869
As low as $907.74/mo
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $62,706.26
$48,802
As low as $965.79/mo
  • Swing Over Bed: 30”
  • Distance Between Centers: 80”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 460V, 15 HP
$69,427.99
As low as $1,373.97/mo
  • Swing Over Bed: 30”
  • Distance Between Centers: 100”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 460V, 15 HP
$76,099.30
As low as $1,506.00/mo
  • Swing Over Bed: 30”
  • Distance Between Centers: 120”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 460V, 15 HP
$81,268.64
As low as $1,608.30/mo
  • Swing Over Bed: 30”
  • Distance Between Centers: 160”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 460V, 7.5 HP
$96,801.74
As low as $1,915.70/mo
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $67,571.45
$52,321
As low as $1,035.43/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,894.26
$32,609
As low as $645.33/mo
  • Swing Over Bed: 30”
  • Distance Between Centers: 80”
  • Spindle Speed: 18 Speeds (10-1,200 RPM)
  • Motor: 440V, 15 HP
$105,564.25
As low as $2,089.11/mo
  • Swing Over Bed: 30”
  • Distance Between Centers: 120”
  • Spindle Speed: 18 Speeds (10-1,200 RPM)
  • Motor: 440V, 15 HP
$119,364.25
As low as $2,362.21/mo
  • Swing Over Bed: 30”
  • Distance Between Centers: 160”
  • Spindle Speed: 18 Speeds (10-1,200 RPM)
  • Motor: 440V, 15 HP
$125,344.25
As low as $2,480.56/mo
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,677.99
$31,729
As low as $627.91/mo
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $32,974.80
$26,157
As low as $517.64/mo
  • Swing Over Bed: 22”
  • Distance Between Centers: 120”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 230V, 15 HP
$76,096.10
As low as $1,505.94/mo
  • Swing Over Bed: 22”
  • Distance Between Centers: 160”
  • Spindle Speed: 12 Speeds (10-1,000 RPM)
  • Motor: 230V, 15 HP
$92,081.88
As low as $1,822.30/mo
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $65,544.26
$50,855
As low as $1,006.42/mo