Floor Model Lathes

  • Layout
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds 894126 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds 894126
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,191.45
$30,650
As low as $606.56/mo
View Details
Jet GH-1880ZX With ACU-RITE 203 DRO With Taper Attachment 321560 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 203 DRO With Taper Attachment 321560
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $73,923.07
$56,695
As low as $1,121.99/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds 894114 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds 894114
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,231.93
$30,683
As low as $607.21/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X-Axis JET Powerfeed 894124 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X-Axis JET Powerfeed 894124
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $37,839.99
$29,675
As low as $587.26/mo
View Details
Jet ETM-949 Mill with X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894108 at Elite Metal Tools
Jet ETM-949 Mill with X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894108
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,650.80
$30,263
As low as $598.90/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and Servo X-Axis Powerfeed and USA Air Powered Draw Bar 894182 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and Servo X-Axis Powerfeed and USA Air Powered Draw Bar 894182
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,137.45
$31,325
As low as $619.92/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed 894166 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed 894166
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,515.72
$30,155
As low as $596.76/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894170 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894170
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,623.99
$32,410
As low as $641.39/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed 894110 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed 894110
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,610.07
$28,064
As low as $555.38/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed 894159 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed 894159
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,515.72
$30,165
As low as $596.96/mo
View Details
Jet ETM-949 mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894113 at Elite Metal Tools
Jet ETM-949 mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894113
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,569.99
$33,098
As low as $655.00/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894121 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894121
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,218.53
$32,120
As low as $635.65/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894149 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894149
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,894.26
$32,595
As low as $645.05/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894111 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894111
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,137.45
$31,338
As low as $620.17/mo
View Details
GMC Machinery 220V Three Phase 6” x 18” Variable Speed Hardinge Type Toolroom Lathe with DRO TL-618EVS at Elite Metal Tools
GMC Machinery 220V Three Phase 6” x 18” Variable Speed Hardinge Type Toolroom Lathe with DRO TL-618EVS
  • Max swing over bed: 11”
  • Swing over carriage: 9”
  • Spindle nose ID/OD: 5C / 4° taper
  • Variable spindle speeds: 0-4,000 rpm (w/5C) 
$37,850
As low as $749.05/mo
View Details
GMC Machinery 220V Three Phase 47” x 160” 12-Speed Heavy-Duty Oil Country Lathe OCL-47160G at Elite Metal Tools
GMC Machinery 220V Three Phase 47” x 160” 12-Speed Heavy-Duty Oil Country Lathe OCL-47160G
  • Max swing over cross slide: 33½”
  • Width of bed: 27¼”
  • Spindle bore: 12-1/8”
  • Spindle speeds: 4-420 rpm. 12 steps 
$297,850
As low as $5,894.45/mo
View Details
GMC Machinery 440V Three Phase 47” x 160” 12-Speed Heavy-Duty Oil Country Lathe OCL-47160G at Elite Metal Tools
GMC Machinery 440V Three Phase 47” x 160” 12-Speed Heavy-Duty Oil Country Lathe OCL-47160G
  • Max swing over cross slide: 33½”
  • Width of bed: 27¼”
  • Spindle bore: 12-1/8”
  • Spindle speeds: 4-420 rpm. 12 steps 
$297,850
As low as $5,894.45/mo
View Details
GMC Machinery 220V Three Phase 47” x 240” 12-Speed Heavy-Duty Oil Country Lathe OCL-47240G at Elite Metal Tools
GMC Machinery 220V Three Phase 47” x 240” 12-Speed Heavy-Duty Oil Country Lathe OCL-47240G
  • Max swing over cross slide: 33½”
  • Width of bed: 27¼”
  • Spindle bore: 12-1/8”
  • Spindle speeds: 4-420 rpm. 12 steps 
$337,850
As low as $6,686.05/mo
View Details
GMC Machinery 440V Three Phase 47” x 240” 12-Speed Heavy-Duty Oil Country Lathe OCL-47240G at Elite Metal Tools
GMC Machinery 440V Three Phase 47” x 240” 12-Speed Heavy-Duty Oil Country Lathe OCL-47240G
  • Max swing over cross slide: 33½”
  • Width of bed: 27¼”
  • Spindle bore: 12-1/8”
  • Spindle speeds: 4-420 rpm. 12 steps 
$337,850
As low as $6,686.05/mo
View Details
GMC Machinery 220V Three Phase 47” x 360” 12-Speed Heavy-Duty Oil Country Lathe OCL-47360G at Elite Metal Tools
GMC Machinery 220V Three Phase 47” x 360” 12-Speed Heavy-Duty Oil Country Lathe OCL-47360G
  • Max swing over cross slide: 33½”
  • Width of bed: 27¼”
  • Spindle bore: 12-1/8”
  • Spindle speeds: 4-420 rpm. 12 steps 
$397,850
As low as $7,873.45/mo
View Details
GMC Machinery 440V Three Phase 47” x 360” 12-Speed Heavy-Duty Oil Country Lathe OCL-47360G at Elite Metal Tools
GMC Machinery 440V Three Phase 47” x 360” 12-Speed Heavy-Duty Oil Country Lathe OCL-47360G
  • Max swing over cross slide: 33½”
  • Width of bed: 27¼”
  • Spindle bore: 12-1/8”
  • Spindle speeds: 4-420 rpm. 12 steps 
$397,850
As low as $7,873.45/mo
View Details
GMC Machinery 220V Single Phase 14” x 40” 12-Speed High Speed Precision Tool Room Metal Lathe with DRO GML-1440T at Elite Metal Tools
GMC Machinery 220V Single Phase 14” x 40” 12-Speed High Speed Precision Tool Room Metal Lathe with DRO GML-1440T
  • Max length of cutting: 34”
  • Max swing over gap: 20¼”
  • Taper of spindle center: MT5
  • Spindle speeds: 45-1,800 rpm (12 steps) 
$13,950
As low as $453.37/mo
View Details
GMC Machinery 220V Single Phase 14” x 40” Variable High Speed Precision Tool Room Metal Lathe with DRO GML-1440VT at Elite Metal Tools
GMC Machinery 220V Single Phase 14” x 40” Variable High Speed Precision Tool Room Metal Lathe with DRO GML-1440VT
  • Max length of cutting: 34”
  • Max swing over gap: 20¼”
  • Taper of spindle center: MT5
  • Spindle speeds: 30-2,000 rpm (variable)  
$14,950
As low as $485.87/mo
View Details
GMC Machinery 220V Three Phase 14” x 40” Variable High Speed Precision Tool Room Metal Lathe with DRO GML-1440VT at Elite Metal Tools
GMC Machinery 220V Three Phase 14” x 40” Variable High Speed Precision Tool Room Metal Lathe with DRO GML-1440VT
  • Max length of cutting: 34”
  • Max swing over gap: 20¼”
  • Taper of spindle center: MT5
  • Spindle speeds: 30-2,000 rpm (variable)  
$14,950
As low as $485.87/mo
View Details