Floor Model Lathes

  • Layout
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894143 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894143
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,624.26
$37,756
As low as $747.19/mo
View Details
Jet GH-1440-3 with 203 DRO ,Collet Closer and Taper Attachment 323408 at Elite Metal Tools
Jet GH-1440-3 with 203 DRO ,Collet Closer and Taper Attachment 323408
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $45,678.26
$35,905
As low as $710.55/mo
View Details
Jet GH-1440-3 with 203 DRO and Taper Attachment 323405 at Elite Metal Tools
Jet GH-1440-3 with 203 DRO and Taper Attachment 323405
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $40,813.07
$32,329
As low as $639.79/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds 894312 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds 894312
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,705.07
$33,720
As low as $667.31/mo
View Details
Jet GH-1880ZX With Taper Attachment 321486 at Elite Metal Tools
Jet GH-1880ZX With Taper Attachment 321486
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $66,625.45
$52,795
As low as $1,044.81/mo
View Details
Jet E-1440VS With Newall DP700 DRO With Collet Closer 892471 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO With Collet Closer 892471
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,353.45
$29,053
As low as $574.95/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894129 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894129
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,407.99
$35,706
As low as $706.62/mo
View Details
Jet GH-1440-3 with DP700 DRO 323411 at Elite Metal Tools
Jet GH-1440-3 with DP700 DRO 323411
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $35,137.07
$28,159
As low as $557.26/mo
View Details
Jet E-1340VS With ACU-RITE 203 DRO 892403 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 203 DRO 892403
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $32,704.53
$26,372
As low as $521.90/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894363 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894363
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,867.45
$35,308
As low as $698.74/mo
View Details
Jet GH-1880ZX With ACU-RITE 303 DRO 321595 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 303 DRO 321595
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $64,530.72
$50,999
As low as $1,009.27/mo
View Details
Jet E-1340VS With Taper Attachment 892400 at Elite Metal Tools
Jet E-1340VS With Taper Attachment 892400
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $31,082.80
$25,180
As low as $498.31/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894356 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894356
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,326.80
$34,911
As low as $690.88/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894136 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894136
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,732.26
$35,209
As low as $696.78/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,570.26
$38,451
As low as $760.94/mo
View Details
Jet E-1440VS With Taper Attachment 892450 at Elite Metal Tools
Jet E-1440VS With Taper Attachment 892450
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $33,245.07
$26,769
As low as $529.75/mo
View Details
Jet E-1440VS With ACU-RITE 303 DRO 892461 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO 892461
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $34,123.53
$27,414
As low as $542.52/mo
View Details
Jet ETM-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894104 at Elite Metal Tools
Jet ETM-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894104
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,326.26
$27,563
As low as $545.47/mo
View Details
Jet GH-1880ZX With Newall DP700 DRO 321488 at Elite Metal Tools
Jet GH-1880ZX With Newall DP700 DRO 321488
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $63,787.45
$49,999
As low as $989.48/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment 892454 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment 892454
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,569.72
$29,946
As low as $592.63/mo
View Details
Jet GH-1880ZX With ACU-RITE 303 DRO With Collet Closer 321598 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 303 DRO With Collet Closer 321598
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $71,963.53
$56,495
As low as $1,118.03/mo
View Details
Jet GH-1440-3 Lathe with Newall DP700 DRO and Taper Attachment 323413 at Elite Metal Tools
Jet GH-1440-3 Lathe with Newall DP700 DRO and Taper Attachment 323413
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $40,542.80
$32,131
As low as $635.87/mo
View Details
Jet GH-2680ZH With Newall DP700 DRO 321861 at Elite Metal Tools
Jet GH-2680ZH With Newall DP700 DRO 321861
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $83,964.20
$64,999
As low as $1,286.33/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,651.45
$39,246
As low as $776.67/mo
View Details