Floor Model Lathes

  • Layout
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894364 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894364
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $49,191.99
$39,027
As low as $772.34/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Taper Attachment, 3HP 311445 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Taper Attachment, 3HP 311445
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $33,109.99
$26,255
As low as $519.58/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds 894340 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds 894340
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,678.26
$35,346
As low as $699.49/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds 894354 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds 894354
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,299.72
$32,902
As low as $651.13/mo
View Details
Knuth 10.1HP 39” Variable Speed Turnado 230/1000 V Universal Lathe with Constant Cutting Speed 320570 at Elite Metal Tools
Knuth 10.1HP 39” Variable Speed Turnado 230/1000 V Universal Lathe with Constant Cutting Speed 320570
  • Center height: 9”
  • Workpiece length (max.): 39”
  • Turning-Ø over support: 9”
  • Gap bridge length: 6”
$32,395
As low as $641.09/mo
View Details
Knuth 29.5HP 118” DL E Heavy 800/3000 Universal Heavy-Duty Lathe 300512 at Elite Metal Tools
Knuth 29.5HP 118” DL E Heavy 800/3000 Universal Heavy-Duty Lathe 300512
  • Workpiece length (max.): 118”
  • Workpiece weight (max.): 13,200 lbs.
  • Turning diameter over bed: 63”
  • Turning-Ø over support: 50”
$209,495
As low as $4,145.90/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894335 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894335
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,948.53
$35,542
As low as $703.37/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds 894333 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds 894333
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,191.72
$34,271
As low as $678.22/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894336 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894336
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $49,056.80
$38,929
As low as $770.40/mo
View Details
Jet E-1440VS With Collet Closer 892451 at Elite Metal Tools
Jet E-1440VS With Collet Closer 892451
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Heavy-duty stand with full length foot brake
MSRP: $32,163.99
$25,571
As low as $506.05/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894369 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894369
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,299.99
$37,658
As low as $745.25/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds 894368 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds 894368
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,056.53
$34,173
As low as $676.28/mo
View Details
Jet ETM-949 Mill with X, Y, Z-Axis JET Powerfeeds 894107 at Elite Metal Tools
Jet ETM-949 Mill with X, Y, Z-Axis JET Powerfeeds 894107
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,461.45
$27,233
As low as $538.94/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894353 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894353
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,921.45
$34,075
As low as $674.34/mo
View Details
Jet E-1236VS With ACU-RITE 303 DRO 892311 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 DRO 892311
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $25,001.45
$19,584
As low as $387.56/mo
View Details
Jet ETM-949 Mill with X-Axis JET Powerfeed 894100 at Elite Metal Tools
Jet ETM-949 Mill with X-Axis JET Powerfeed 894100
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $29,866.53
$23,103
As low as $457.20/mo
View Details
Jet E-1340VS With Collet Closer 892401 at Elite Metal Tools
Jet E-1340VS With Collet Closer 892401
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $30,542.26
$23,592
As low as $466.88/mo
View Details
Jet E-1236VS With Collet Closer 892301 at Elite Metal Tools
Jet E-1236VS With Collet Closer 892301
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $26,487.99
$20,650
As low as $408.66/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894346 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894346
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,624.26
$37,169
As low as $735.57/mo
View Details
Knuth 29.5HP 59” DL E Heavy 620/1500 Universal Heavy-Duty Lathe 300505 at Elite Metal Tools
Knuth 29.5HP 59” DL E Heavy 620/1500 Universal Heavy-Duty Lathe 300505
  • Workpiece length (max.): 59”
  • Workpiece weight (max.): 13,200 lbs.
  • Turning diameter over bed: 49”
  • Turning-Ø over support: 35”
$149,495
As low as $2,958.50/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894311 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894311
  • Patented vari-disc key provides up to 10 times the wear resistance than aluminum or brass keys
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
MSRP: $44,597.07
$34,564
As low as $684.02/mo
View Details
Jet GH-1440-1 Lathe with Newall DP700 DRO and Collet Closer 323383 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall DP700 DRO and Collet Closer 323383
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $37,839.99
$29,676.48
As low as $587.29/mo
View Details
Knuth 20.1HP 118” DL S 425/3000 Universal Heavy-Duty Lathe 301511 at Elite Metal Tools
Knuth 20.1HP 118” DL S 425/3000 Universal Heavy-Duty Lathe 301511
  • Workpiece length (max.): 118”
  • Workpiece weight (max.): 8,800 lbs.
  • Turning diameter over bed: 33”
  • Turning-Ø over support: 20”
$104,995
As low as $2,077.85/mo
View Details
Knuth 10.1HP 79” Sinus 400/2000 D Precision Lathe 300013 at Elite Metal Tools
Knuth 10.1HP 79” Sinus 400/2000 D Precision Lathe 300013
  • Workpiece length (max.): 79”
  • Turning diameter over bed: 31”
  • Turning-Ø over support: 22”
  • Turning diameter without gap bridge: 44”
$56,495
As low as $1,118.03/mo
View Details