Belt & Disc

  • Fixed Speed: 6500 SFPM
  • Contact Wheel Size: 7 x 4"
  • Motor: 3 HP 440V Three Phase
  • Includes Magnetic Starter
MSRP: $5,295
$4,711.01
As low as $153.10/mo
  • Grinder amp draws: 3PH 230V 11.8 amps
  • Dust collector amp draws: 3PH 230V 2.8 amps
  • Belt speed: 6900 SFPM
  • Grinder switch: Magnetic on/off switch
MSRP: $6,395
$6,017
As low as $195.55/mo
  • Nameplate Output- 1.5
  • Number of Poles- 4
  • Voltage- 575 V
  • Comes with 36 and 60 grit wheels, and 575 volt 50//60 Hz
MSRP: $2,710
$2,251.77
As low as $73.18/mo
  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,038.51
$910
As low as $29.57/mo
  • Nameplate Output- 5
  • Number of Poles- 4
  • Voltage- 460 V or 230 V or 208 V
  • Factory connected for 230, magnetic starter must be changed for other voltages
MSRP: $5,395
$4,303.82
As low as $139.87/mo
  • 10″x90″ belt, 3400 SFPM
  • 10HP, 3phase, TEFC motor. Magnetic controls with jog switch
  • Table Tilt 45 deg. down, 15 deg. up
  • Dimensions: L46″ x W30″ x H35″
$11,178
As low as $363.28/mo
  • CSA/CUS Certified
  • Heavy Cast Iron Bases
  • Oversized motor shafts, heavy retainer plates and massive lock nuts.
  • The wide range of spacer options allow you to run a huge variety of finishing wheels.
MSRP: $1,667.44
$1,425
As low as $46.31/mo
  • Grinder 3PH amps draws: 2.8 amps
  • Vacuum 3PH FLA: 2.8 amps
  • SFPM: 5400
  • 3″ and 1.5″ serrated contact wheels on rotating platen
MSRP: $4,250
$4,079
As low as $132.56/mo
  • Extra large tilting table
  • Extra large tilting table lowers completely below disc for use of the entire disc surface
  • Low voltage protection switch
  • Precision table raiser utilizes a rack and gear mechanism for effortless operation
  • Rigid column and heavy duty base
MSRP: $4,439.31
$3,619
As low as $117.61/mo
  • Shaft Diameter: 5/8"
  • Belt Size L x W: 4" x 36"
  • Rpm: 3600
  • Dust Collection: Integrated dust chute
MSRP: $1,222.03
$1,045
As low as $33.96/mo
  • Nameplate Output- .75
  • Number of Poles- 2
  • Voltage- 460 V or 230 V or 208 V
  • Comes with 36 and 60 grit wheels, connected for 208-230 volts no power cord
MSRP: $2,087
$1,718.01
As low as $55.83/mo
  • Motor 1.5 hp
  • Power 110V
  • Belt Size L x W 60" x 2"
  • Belt Speed (ft./min.) 800 - 8000 fpm (variable)

 

 

MSRP: $5,207.84
$4,239
As low as $137.76/mo
  • 10″ disc sander with 4″ x 36″ belt sander
  • With full boxed OSHA guard, Horizontal or vertical belt position
  • 1/2 HP 1PH TEFC motor , 115 volts, 1 ph, 7.4 amps, 230 volt, 1 ph, 3.7 amps
  • Factory wired at 115 volt, 1 phase, 8 ft. 3 prong plug standard
$1,368
As low as $44.46/mo
  • Fixed Speed: 5500 SFPM
  • Contact Wheel Size: 1” x 2"
  • Manual Spring Tension Quick Change Assembly
  • Motor: 1.5 HP 120V Single Phase
MSRP: $4,132
$3,730.97
As low as $121.25/mo
  • Volts: 115/230V
  • Amps AC: 12.6/6.3
  • Belt SFPM: 2258
  • Dust Chute Size: 4 in
MSRP: $1,733
$1,685
As low as $54.76/mo
  • Belt Size L x W: 48” x 2”
  • Belt Speed (ft./min.): 4712 fpm
  • Disc Diameter: 9"
  • Disc Speed: 3600 rpm
MSRP: $1,057.14
$910
As low as $29.57/mo
  • Nameplate Output- 3
  • Number of Poles- 2
  • Voltage- 460 V or 230 V or 208 V
  • Factory connected for 230, manual starter, specify voltage when ordering
MSRP: $4,216
$3,369.10
As low as $109.49/mo
  • Adjustable dust deflector and dust chute
  • Adjustable, heavy-duty, cast iron removable platen
  • Belt head adjusts vertically and horizontally
  • Completely enclosed drums and guarded sanding belt
  • Fine thread adjustments for simple and easy belt tracking
MSRP: $2,911.38
$2,379
As low as $77.31/mo
  • 1PH amps: 11.5 amps
  • 24-1/2″ long steel reversible and replaceable platen
  • Belt size: 3″ x 90″. All belt types can be used.
  • Belt speed: 7200 SFPM
$3,143
As low as $102.14/mo
  • Grinder amp draws: 3PH 460V 5.9 amps
  • Dust collector amp draws: 3PH 460V 1.4 amps.
  • Belt speed: 6900 SFPM
  • Grinder switch: Magnetic on/off switch
MSRP: $6,395
$6,017
As low as $195.55/mo
  • 1PH amps: 11.5 amps
  • 24-1/2″ long steel reversible and replaceable platen.
  • Belt size: 4″ x 90″. All belt types are usable.
  • Belt speed: 7200 SFPM.
MSRP: $3,995
$3,831
As low as $124.50/mo
  • Shaft Diameter: 0.75”
  • Speed: 3000 rpm/3600 rpm
  • Wheel Diameter: 6”
  • Wheel Bore Size: 1.25”
MSRP: $2,928
$2,413.51
As low as $78.43/mo
  • Nameplate Output- 5
  • Number of Poles- 4
  • Voltage- 575 V
  • Factory connected for 230, magnetic starter must be changed for other voltages
MSRP: $7,926
$6,391.63
As low as $207.72/mo
  • Driven Rollers: 3
  • Speeds: Single
  • Belt Speed (ft./min.): 5,500 fpm
  • Dust Collection: Integrated dust chute
MSRP: $1,670
$1,399
As low as $45.46/mo