Belt & Disc

  • Runs on 110 volt single-phase power, compatible with practically any fabrication site.
  • Platen, slack, & contact wheel grinding accommodate a wide variety of grinding jobs.
  • 2 fixed wheels diameters.
  • Includes an adjustable work rest to match up perfectly with the different contact areas.
MSRP: $2,702.80
$2,225
As low as $72.31/mo

  • Voltage: 220V 60hz 1PH
  • Belt Size: 3” x 79”
  • Wheel Diameter: 7” Drive Wheel, 4” Contact Wheel
  • Belt Speed: 5018 fpm
$1,175
As low as $38.18/mo

  • Grinder 1PH amp draws: 5.9 amps
  • Vacuum 1PH FLA: 5.9 amps
  • SFPM: 5400
  • 3″ and 1.5″ serrated contact wheels on rotating platen
MSRP: $4,250
$4,079
As low as $132.56/mo

  • Shaft Diameter: 1"
  • Dust Collection: Integrated dust chute
  • Grit: 36 & 60
  • Wheel Size: 10" x 1" x 1" - Aluminum Oxide
MSRP: $945.99
$852
As low as $27.69/mo

  • Nameplate- Output 1
  • Number of Poles- 4
  • Voltage- 230 V or 115 V
  • Comes with 36 and 60 grit wheels, connected for 115 volts no power cord
MSRP: $2,748
$2,526.44
As low as $82.10/mo

  • Shaft Diameter: 0.75”
  • Speed: 3000 rpm/3600 rpm
  • Wheel Diameter: 6”
  • Wheel Bore Size: 1.25”
MSRP: $2,928
$2,674.42
As low as $86.91/mo

  • Frequency: 50.00 Hz/60.00 Hz
  • Shaft Diameter: 0.75”
  • Speed: 3000 rpm/3600 rpm
  • Wheel Bore Size: 1.25”
MSRP: $3,294
$2,975.33
As low as $96.69/mo

  • Fixed Speed: 8000 SFPM
  • Contact Wheel Size: 7 x 2.5"
  • Quick belt change
  • Motor: 3 HP 220V Three Phase
MSRP: $4,777
$4,274.47
As low as $138.92/mo

  • Dia. contact wheel: 8″
  • Platens: 24″
  • Reversible steel platen: 24-1/2″
  • Mounted on DCV-6 dust collector – 400 CFM
MSRP: $5,395
$5,174
As low as $168.15/mo

  • 60 grit belt and disc standard on machine
  • Adjustable dust collector and dust chute
  • Belt head adjusts vertically and horizontally
  • Belt operates at any angle
  • Completely enclosed drums and guarded sanding belt
MSRP: $3,473.13
$2,799
As low as $90.96/mo

  • Fixed Speed: 7200 SFPM
  • Contact Wheel Size: 8” x 3"
  • Adjustable Work Rest
  • Motor: 3 HP 220V Three Phase
MSRP: $7,588
$6,916.41
As low as $224.78/mo

  • Adjustable dust collector and dust chute
  • Belt head adjusts vertically and horizontally
  • Belt operates at any angle
  • Completely enclosed drums and guarded sanding belt
  • Fully machined, balanced disc
MSRP: $3,128.50
$2,545
As low as $82.71/mo

  • 3" Belt Width
  • Adjustable Angle Floor Stand
  • Top Platen for Flat Work Grinding and Small Parts
  • Adjustable Work Rest with Face Shield
$1,835
As low as $59.63/mo

  • Nameplate Output- .5
  • Number of Poles- 2
  • Voltage- 115 V
  • Factory connected for 115 volts, power cord supplied
MSRP: $3,294
$2,975.33
As low as $96.69/mo

  • Nameplate Output- 2
  • Number of Poles- 4
  • Voltage- 460 V or 230 V or 208 V
  • Factory connected for 230, manual starter, specify voltage when ordering
MSRP: $6,180
$5,492.47
As low as $178.50/mo

  • Fixed Speed: 6500 SFPM
  • Contact Wheel Size: 7 x 4"
  • Motor: 3 HP 440V Three Phase
  • Includes Magnetic Starter
MSRP: $5,295
$4,711.01
As low as $153.10/mo

  • USA Made
  • 3" x 90" Belt
  • Multi-Position Horizontal through Vertical

 

$2,967
As low as $96.42/mo

  • 12" Disc Sander
  • Vacuum Base Included
  • Table Tilts 45 Degree and up to 90 Degree
  • 1HP Motor
MSRP: $1,870
$1,811
As low as $58.85/mo

  • Fixed Speed: 7200 SFPM
  • Contact Wheel Size: 8” x 3"
  • Adjustable Work Rest
  • Motor: 3 HP 440V Three Phase
MSRP: $7,588
$6,916.41
As low as $224.78/mo

  • Nameplate Output- 5
  • Number of Poles- 4
  • Voltage- 460 V or 230 V or 208 V
  • Factory connected for 230, magnetic starter must be changed for other voltages
MSRP: $7,926
$7,082.61
As low as $230.18/mo

  • Nameplate Output- 7.5
  • Number of Poles- 2
  • Voltage- 460 V or 230 V or 208 V
  • Factory connected for 230, magnetic starter must be changed for other voltages
MSRP: $5,702
$5,021.51
As low as $163.19/mo

  • Adjustable Dust port with high dust collection efficiency and drive sparks away from the Operator
  • Aluminum casted drive wheel for years of use
  • Flat and Angular Stock: Platen setting is the perfect angle for high speed, precision flat and level grinding
  • Fully guarded on all grinding surfaces
  • Steel frame and platen provides heavy duty construction
MSRP: $3,540.67
$2,855
As low as $92.78/mo

  • 10" Disc Sander
  • 4" x 36" Belt Sander
  • 1/2HP 1Phase, 115Volts
  • Made in the U.S.A
$1,326
As low as $43.09/mo