Belt & Disc

  • Nameplate Output- .75
  • Number of Poles- 2
  • Voltage- 460 V or 230 V or 208 V
  • Comes with 36 and 60 grit wheels, water pot, tool tray, lighted eye shields, and connected for 208-230 volts no power cord
MSRP: $2,420
$2,036.61
As low as $66.18/mo
  • Nameplate Output- .75
  • Number of Poles- 2
  • Voltage- 230 V or 115 V
  • Comes with 36 and 0.014 wire wheel, connected for 115 volts power cord included
MSRP: $2,156
$1,769.20
As low as $57.49/mo
  • CSA/CUS Certified
  • Heavy Cast Iron Bases
  • Oversized motor shafts, heavy retainer plates and massive lock nuts.
  • Safety switch with removable key
  • The wide range of spacer options allow you to run a huge variety of finishing wheels.
MSRP: $811.20
$735
As low as $23.88/mo
  • Nameplate Output- 1
  • Number of Poles- 4
  • Voltage- 230 V or 115 V
  • Factory connected for 115 volts, no power cord
MSRP: $2,041
$1,665.42
As low as $54.12/mo
  • Nameplate Output- .75
  • Number of Poles- 2
  • Voltage- 460 V or 230 V or 208 V
  • Comes with 36 grit and 0.014 wire wheel, connected for 208-230 volts no power cord
MSRP: $2,087
$1,718.01
As low as $55.83/mo
  • Operate in a horizontal or vertical position
  • 1 HP 120v Motor
  • Comes with MT362 2x36 attachment
  • Quick change belt system
$645
As low as $20.96/mo
  • Adjustable Tool Rest
  • Cast iron wheel guard
  • Cast iron wheel guards dust chutes
  • Crimped Wire wheel included
  • Rubber mounts prevents movement
MSRP: $467.14
$454
  • Nameplate Output- .75
  • Number of Poles- 2
  • Voltage- 230 V or 115 V
  • Factory connected for 115 volts, power cord supplied
MSRP: $1,538
$1,227.62
As low as $39.89/mo
  • 1" x 42" Belt Grinder
  • 1/2HP Motor
  • 1Phase/110Volt
  • Made in U.S.A
MSRP: $1,085
$999
As low as $32.46/mo
  • Nameplate Output- .75
  • Number of Poles- 4
  • Voltage- 460 V or 230 V or 208 V
  • Comes with 36 and 60 grit wheels, waterpot, tool tray, lighted eye shields, and connected for 208-230 volts no power cord
MSRP: $2,420
$2,036.61
As low as $66.18/mo
  • Abrasive belt unit removes material and finishes at the same time, allowing the operator to get into small openings, plus handle odd shapes and angles
  • Adjustable dust deflector and dust chute
  • Cast iron construction
  • Deluxe miter gauge that turns and locks for common angles, 45° both left and right
  • Heavy-duty steel base and rubber feet
MSRP: $735.71
$650
As low as $21.12/mo
  • Nameplate Output- 1
  • Number of Poles- 4
  • Voltage- 230 V or 115 V
  • Comes with 36 and 60 grit wheels, water pot, tool tray, lighted eye shields, connected for 115 volts no power cord
MSRP: $3,147
$2,575.99
As low as $83.71/mo
  • Frequency: 60 Hz
  • Nameplate Output: 0.25/0.06
  • Shaft Diameter/Taper: 0.375”/0.25”
  • Speed: 1800 rpm/3600 rpm
MSRP: $916
$743.06
As low as $24.14/mo
  • CSA/CUS Certified
  • Heavy Cast Iron Bases
  • Oversized motor shafts, heavy retainer plates and massive lock nuts.
  • Safety switch with removable key
  • The wide range of spacer options allow you to run a huge variety of finishing wheels.
  • Nameplate Output- .5
  • Number of Poles- 2
  • Voltage- 115 V
  • Comes with 36 grit and 0.014 wire wheel, stamp steel tool rests, and non-exhaust type wheel guards
MSRP: $1,124
$908.92
As low as $29.53/mo
  • Nameplate Output- 1.5
  • Number of Poles- 2
  • Voltage- 230 V or 115 V
  • Factory connected for 115 volts, no power cord
MSRP: $2,008
$1,640.94
As low as $53.33/mo
  • Variable Speed: 410-4140 RPM
  • 5/8” Arbor Thread
  • Quick wheel change
  • Motor: 3/4 HP 120V Single Phase
MSRP: $2,210
$2,006.34
As low as $65.20/mo
  • Nameplate Output- 1 1/2
  • Wheel Diameter- 8.0000 in
  • Wheel Bore Size- 0.7500 in
  • Factory connected for 115 volts, power cord supplied, factory connected for 115 volts, no power cord, supplied with 8"x1"x3/4" 36 grit wheel and 80 grit belt
MSRP: $4,968
$3,927.03
As low as $127.62/mo
  • Nameplate Output- .5/.3
  • Number of Poles- 2 or 4
  • Voltage- 115 V
  • Comes with 36 and 60 grit wheels, cast iron tool rests, water pot, tool tray and lighted eye shields
MSRP: $2,166
$1,776.62
As low as $57.74/mo
  • Compatible with JET models IBG-8SSB and IBG-8VSB bench buffers
  • Heavy duty 14 gauge steel buffer hood housing, 4" exhaust outlet, & 10 gauge mounting plates and brackets
MSRP: $465.71
$453
  • Adjustable Tool Rest
  • Cast iron wheel guard
  • Cast iron wheel guards dust chutes
  • Crimped Wire wheel included
  • Rubber mounts prevents movement
MSRP: $352.86
$303
  • Nameplate Output- 1.5
  • Number of Poles- 4
  • Voltage- 460 V or 230 V or 208 V
  • Factory connected for 208-230 volts, no power cord
MSRP: $1,960
$1,540.71
As low as $50.07/mo
  • Motor: 1/3 HP
  • Belt Size: 2 x 42 or 1 x 42 in
  • Disc Table Size: 5-1/2 x 8-1/4 in
  • Belt Table Size: 6-3/4 x 9 in
  • Variable Speed: 410-4140 RPM
  • 5/8” Arbor Thread
  • Quick wheel change
  • Motor: 1.5 HP 120V Single Phase
MSRP: $2,967
$2,660.19
As low as $86.45/mo