Belt & Disc

  • Fixed Speed: 2200 SFPM
  • Accepts up to 10" diameter wheels, 2" wide
  • 3/4” Arbor
  • Motor: 1.5 HP 120V Single Phase
MSRP: $3,695
$3,362.70
As low as $109.28/mo

  • Frequency: 60 Hz
  • Nameplate Output: 0.25/0.06
  • Shaft Diameter/Taper: 0.375”/0.25”
  • Speed: 1800 rpm/3600 rpm
MSRP: $916
$743.06
As low as $24.14/mo

  • Adjustable dust deflector and dust chute
  • Adjustable, heavy-duty, cast iron removable platen
  • Belt head adjusts vertically and horizontally
  • Completely enclosed drums and guarded sanding belt
  • Fine thread adjustments for simple and easy belt tracking
MSRP: $3,009.99
$2,449.99
As low as $79.62/mo

  • 6" x 90" Belt Grinder
  • USA MADE!
  • 6" x 24" Platen
  • VACUUM IS SOLD SEPARATELY
MSRP: $6,495
$6,038
As low as $196.23/mo

  • Volts: 115/230V
  • Amps AC: 12.5/6.25
  • Disc Speed: 1720 RPM
  • Belt SFPM: 2258 SFPM
MSRP: $2,800
$2,649
As low as $86.09/mo

  • Fixed Speed: 4140 RPM
  • 5/8” Arbor Thread
  • Quick wheel change
  • Motor: 3/4 HP 120V Single Phase
MSRP: $1,375
$1,228.88
As low as $39.93/mo

  • Grinder amp draws: 3PH 230V 11.8 amps
  • Dust collector amp draws: 3PH 230V 2.8 amps
  • Belt speed: 6900 SFPM
  • Grinder switch: Magnetic on/off switch
MSRP: $6,395
$6,017
As low as $195.55/mo

  • Dia. contact wheel: 8″
  • Platens: 24″
  • Reversible steel platen: 24-1/2″
  • Mounted on DCV-6 dust collector – 400 CFM
MSRP: $5,395
$5,174
As low as $168.15/mo

  • Frequency: 60 Hz
  • Nameplate Output: 0.25/0.06
  • Shaft Diameter/Taper: 0.375”/0.25”
  • Speed: 1725 rpm/3450 rpm
MSRP: $1,004
$814.12
As low as $26.45/mo

  • CSA/CUS Certified
  • Heavy Cast Iron Bases
  • Oversized motor shafts, heavy retainer plates and massive lock nuts.
  • The wide range of spacer options allow you to run a huge variety of finishing wheels.
MSRP: $1,793.69
$1,479
As low as $48.06/mo

  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,130.29
$995
As low as $32.33/mo

  • Shaft Diameter: 5/8"
  • Dust Collection: Integrated dust chute
  • Grit: 36 & 60
  • Wheel Size: 8" x 1" x 5/8" - Aluminum Oxide
MSRP: $675.69
$609
As low as $19.79/mo

  • Grinder 3PH amps draws: 2.8 amps
  • Vacuum 3PH FLA: 2.8 amps
  • SFPM: 5400
  • 3″ and 1.5″ serrated contact wheels on rotating platen
MSRP: $4,250
$4,079
As low as $132.56/mo

  • Frequency: 60 Hz
  • Nameplate Output: 0.33/0.17
  • Shaft Diameter/Taper: 0.375”/0.25”
  • Speed: 1725 rpm/3450 rpm
MSRP: $1,117
$903.72
As low as $29.37/mo

  • Fixed Speed: 5500 SFPM
  • Contact Wheel Size: 1” x 2"
  • Manual Spring Tension Quick Change Assembly
  • Motor: 1.5 HP 120V Single Phase
MSRP: $4,132
$3,730.97
As low as $121.25/mo

  • 10" Disc Sander
  • Vacuum Included
  • 1/2 HP Motor
  • Made in the USA
$1,389
As low as $45.14/mo

  • Fixed Speed: 4140 RPM
  • 5/8” Arbor Thread
  • Quick wheel change
  • Motor: 1.5 HP 120V Single Phase
MSRP: $1,817
$1,675.15
As low as $54.44/mo

  • Extra large tilting table
  • Extra large tilting table lowers completely below disc for use of the entire disc surface
  • Low voltage protection switch
  • Precision table raiser utilizes a rack and gear mechanism for effortless operation
  • Rigid column and heavy duty base
MSRP: $4,668.59
$3,755
As low as $122.03/mo

  • Frequency: 60 Hz
  • Nameplate Output: 0.5
  • Shaft Diameter/Taper: 0.375”/0.25”
  • Speed: 1725 rpm/3450 rpm
MSRP: $1,006
$815.61
As low as $26.50/mo

  • Shaft Diameter: 5/8"
  • Belt Size L x W: 4" x 36"
  • Rpm: 3600
  • Dust Collection: Integrated dust chute
MSRP: $1,277.69
$1,099
As low as $35.71/mo

  • Frequency: 50 Hz
  • Nameplate Output: 0.25/0.06
  • Shaft Diameter/Taper: 0.375”/0.25”
  • Speed: 1500 rpm/3000 rpm
MSRP: $916
$743.06
As low as $24.14/mo

  • Belt Size L x W: 48” x 2”
  • Belt Speed (ft./min.): 4712 fpm
  • Disc Diameter: 9"
  • Disc Speed: 3600 rpm
MSRP: $1,117.99
$955
As low as $31.03/mo

  • 1PH amps: 11.5 amps
  • 24-1/2″ long steel reversible and replaceable platen
  • Belt size: 3″ x 90″. All belt types can be used.
  • Belt speed: 7200 SFPM
$3,143
As low as $102.14/mo

  • Adjustable dust deflector and dust chute
  • Adjustable, heavy-duty, cast iron removable platen
  • Belt head adjusts vertically and horizontally
  • Completely enclosed drums and guarded sanding belt
  • Fine thread adjustments for simple and easy belt tracking
MSRP: $3,059.09
$2,430
As low as $78.97/mo