Beveling Machines

  • 1.5HP Motor
  • Max Bevel is 3/4" at 45°
  • 12 Insert Carbide Milling Blade
  • Pipe Beveling from 150mm to 350mm
$4,261.43
$3,509.00
  • Max. Bevel Width .472"
  • Bevel Angle 30° to 50° With optional plates, (30° and 45° are inlcuded)
  • Material Thickness .118" to 1.37" (3-35mm)
  • Min. Material Dim. 2.36" x 2.36" (60mm x 60mm)
$11,662.86
$9,609.00
  • 2.3HP, 110 Volt, 50/60HZ
  • Adjustable Fence
  • Adjustable Depth of Cut
  • Tool has te ability to remove weld beads from an inside 90 degre corner
  • Clean burr - free edges
  • Variable angle 15° - 45°
  • Self supporting on the work piece
  • Pipe Beveling attachment included
$2,395.00
$2,110.00
  • 2HP, 110 VOLT
  • Width of Cut: 1/2" (SINGLE PASS)
  • Maximum Weld Bead Height: 3/16" (Single Pass)
  • Uses 8 Standard Square Carbide Inserts
$1,895.00
$1,675.00
  • Shape Beveler
  • Motor 2 1/2 110 volt
  • Variable Speed 2300-6500 RPM
  • Minimum inside hole 1 1/4"
$1,395.00
$1,240.00
  • Very Lightweight (18lbs)
  • Bevels At Three Positions (15, 30 and 45 degrees)
  • Optional Pivot Plates For Added Tunability
  • Comes Standard With Bench Mount
$1,978.57
$1,629.00
  • Bevel at 6′ feet per minute
  • Direct drive
  • Light weight
  • Ideal for thin materials
$7,295.00
$6,745.00
  • Chamfer or deburr any material from plastic to hardened steel
  • Easily adjustable depth of cut
  • Cast aluminum frame
  • Ideal for finish chamfers or machined parts
$1,195.00
$1,159.00
  • Adjustable depth of cut
  • Variable angle 15° - 45°
  • Self supporting on the work piece
  • Pipe Beveling attachment included
$2,895.00
$2,605.00
  • Deburr-Chamfer edges easily
  • Adjustable depth of cut
  • Produce Bridgeport Mill quality finishes fast without any set-up
  • Variable angle
$1,795.00
$1,665.00
  • Shape Beveler Pneumatic
  • 1/8" Radius cutter for corner rounding
  • Variable speed
  • Maximum speed 12000 RPM
$1,595.00
$1,385.00
  • Adjustable depth of cut
  • Variable angle 15° - 45°
  • Self supporting on the work piece
  • Pipe Beveling attachment included
$2,295.00
$2,015.00
  • Pneumatic operation
  • Gear drive
  • Self supporting on the work piece
  • Clean burr - free edges
$2,895.00
$2,485.00
  • Double insulated
  • Variable Speed (optional)
  • Variable angle 15° - 45°
  • Self supporting on the work piece
$1,695.00
$1,489.00
  • Edge Chamfer Beveling
  • 1/2HP
  • Makes Chamfers on any Metal up to 3/16" Deep
  • Uses Carbide Inserts in a Milling Cutter
  • Variable angle 15° - 45°
  • Self supporting on the work piece
  • Pipe Beveling attachment included
  • Clean burr - free edges
$1,795.00
$1,575.00