Band Saws

  • Round Capacity: 31.5"
  • Rectangular Capacity (HxW): 31.5" x 33.5"
  • Blade Motor: 10 HP
  • Workbed Height: 25.2"
  • Blade Speed: 65 - 393 FPM
  • Blade Size (L x W x T): 19' 9.2" x 2" x 0.050" / 0.063"
  • Blade Motor: 10 HP
  • Coolant Motor: 1/2 HP
  • Band Saw Blade (L x W x Gage): 512 x 3-3/20 x 0.063" (13000x80x1.6mm)
  • Band Speed: 39-246 FPM (12 – 75 m/min)
  • Material Pass Line Height: 26.8" (680 mm)
  • Dimensions W x L x H: 244 x 110.2 x 149.6″ (6200 x 2800 x 3800 mm)
  • Motor: 1.5 HP/115-230V/1PH/60Hz
  • Cutting Speeds: 82 to 385 fpm
  • Max. Thickness of Cut: 10"
  • Miter Capacity: 90°
$6,189.00
$5,802.19
  • Speed Control: Inverter
  • Table Size: 19.68" x 21.25"
  • Speeds: Variable
  • Maximum Thickness: 12.9"
$8,733.71
$7,109.00
  • Motor: 1.5 HP/115-230V-1PH/60Hz
  • Cutting Speeds: 80 to 350 fpm
  • Max. Thickness of Cut: 10"
  • Miter Capacity: 90°
$5,974.00
$5,600.63
  • Fully hydraulic
  • Manual mitering up to 60 degrees
  • Feeder stroke 20" w/ unlimited indexes
  • Scrap end 5"
  • Band Wheel Diameter: 15” Flanged, Cast Iron
  • Blade Size: 1” x .035” x 11’
  • Bed Height: 25”
  • Blade Speeds Step: (4) 75, 121, 190, 305 fpm
  • Capacity Height: 12"
  • Capacity Throat: 23.5"
  • Workbed Size: 26.75" x 29.5"
  • Workbed Travel: 13"

 

  • Blade Speeds (Variable Speed): 66–330 fpm
  • Blade Size: 1.25” x 0.042” x 193”
  • Minimum Cut Thickness: 0.126”
  • Max. Feed: 255.9”
  • Hydraulic Pump Motor: 2 Hp
  • Hydraulic Oil Capacity: 10.5 gallons
  • Blade Speeds (Variable Speed): 66-328 fpm
  • Blade Size (W x T x L): 2” x 0.06” x 283”
  • 6 Degree Cant
  • Capacity for W 18 beams
  • Perfectly Counter Balanced
  • Large Scale for accurate miters
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
  • Patented 3-Jaw vise with rapid action moveable jaw for faster set up
  • Swing away control panel houses major saw controls
$8,553.84
$6,989.00
  • Blade width: 0.12” - 0.59”
  • Blade length: 133.46” - 136.5”
  • Cutting capacity (height x throat): 11” x 16”
  • Cutting speed: 840.39 fpm
  • Motor rating hydraulic pump: 1.5 Hp
  • Motor rating coolant pump: 0.2 Hp
  • Cutting speed: 65.4 fpm - 327 fpm
  • Blade dimensions: 236.22” x 1.61” x 0.05”
  • One Bi-metal sawblade
  • Low voltage control
  • TEFC 3 phase drive motor
  • Totally enclosed worm gear transmission
  • Cutting speed: 148 / 295 fpm
  • Motor rating main drive: 1.5 Hp
  • Supply voltage: 400 V
  • Cutting Capacities: 0°, 45°, 60°
  • 6 Degree Cant
  • Capacity for W 18 beams
  • Perfectly Counter Balanced
  • Large Scale for accurate miters
  • Cutting Speeds: 114- 229 ft/min
  • Band Dims.: 107.5" x 1" x 0.035"
  • Main Motor: 1.75 HP
  • Capacity: 0°, 45°, 60°, -45°
  • Magnetic Starter with 110v Control Circuit and Overload Protection
  • 1/2" (13mm) and 3/4" (19mm) Chevron type Blade Guides with Back-Up Roller
  • Hydraulic Table Models 26-3/4" (680mm) x 29" (736mm) Heavy-duty Cast Iron Table with two-way tilt (15°L & 45°R) Four (4) T-Slots on Top Table Travel 13"
  • Two (2) year limited warranty