Band Saws

  • Electronicly controled blade speed from 82 - 330 SFPM
  • Proprietary oversized chip tray design minimizes over spray and reduces clean up
  • Large hand wheel and built-in gauge provides easy blade tensioning
  • Quick-positioning vise with fully adjustable jaws, swivels to 45°
  • Blade is fully guarded, regardless of blade guide position
$7,062.86
$5,979.00
On Sale
Image of Jet HVBS-712D, 7" x 12" Deluxe Horizontal / Vertical Bandsaw 414560
  • Large 9" x 12" infeed table assembly extends the support area and can be used in either horizontal or vertical positions
  • Multi-position blade guides enhance use in vertical position by increasing the throat capacity from 4" to 8" and creates a safer working position
  • Tool-less quick lock vise with preset mitering positions at 15°, 30° & 45°
  • Improved Height and width of stand with built-in storage cabinet and chip tray
  • Micro adjustable tool-less material stop for accurate set-up and repeatability
$1,881.43
$1,479.00
  • Proprietary oversized chip tray design minimizes over spray and reduces clean up
  • Coolant is distributed through the blade guides
  • Carbide blade guides feature parallel double-row ball bearing support
  • Blade is guarded, regardless of blade guide position
  • Large hand wheel and built-in gauge provides easy blade tensioning
$5,921.43
$4,929.00
  • Heavy-duty bandsaw, can handle large production pieces on its extra-large twin tables
  • Three wheel system for cutting wide pieces
  • Two-Speed transmission and variable speed allow for a wide range of blade speeds
  • Heavy-duty, completely enclosed steel frame
  • Multi-tilting worktables
$15,184.29
$12,499.00
  • For added safety, the J-7015 follows strict guidelines and electrical requirements to be certified by CSA Group
  • Dual voltage electrics (115/230V) with overload and low voltage protection
  • Heavy-Duty transmission utilizes hardened and ground gears operating in an oil bath
  • Fully adjustable hydraulic downfeed system
  • Carbide blade guides feature parallel double-row ball bearing support
$4,304.29
$3,569.00
  • Heavy-duty bandsaw, can handle large production pieces on its extra-large table
  • Multi-tilting worktable
  • Easy to read blade tension indicator
  • Variable speeds provide proper adjustments for high efficiency cutting
  • Bi-Metal blade welder, grinder and cutter
$7,972.86
$6,599.00
  • Heavy duty construction reduces vibration and deflection
  • Built in, self propelled blade brush prevents chip build up in blade guides
  • Blade tension gauge helps to ensure the blade is in the correct cutting position
  • Magnetic starter for low voltage and lost phase protection
  • Automatic blade breakage sensor detects accidental breakage and interrupts the power
$8,884.29
$7,349.00
  • Heavy duty construction reduces vibration and deflection
  • Built in, self propelled blade brush prevents chip build up in blade guides
  • Blade tension gauge helps to ensure the blade is in the correct cutting position
  • Magnetic starter for low voltage and lost phase protection
  • Automatic blade breakage sensor detects accidental breakage and interrupts the power
$20,245.71
$16,829.00
  • Heavy duty construction reduces vibration and deflection
  • Built in, self propelled blade brush prevents chip build up in blade guides
  • Blade tension gauge helps to ensure the blade is in the correct cutting position
  • Magnetic starter for low voltage and lost phase protection
  • Automatic blade breakage sensor detects accidental breakage and interrupts the power
$8,884.29
$7,349.00
  • Heavy duty construction reduces vibration and deflection
  • Built in, self propelled blade brush prevents chip build up in blade guides
  • Blade tension gauge helps to ensure the blade is in the correct cutting position
  • Magnetic starter for low voltage and lost phase protection
  • Automatic blade breakage sensor detects accidental breakage and interrupts the power
$20,245.71
$16,829.00
  • Built in, self propelled blade brush prevents chip build up in blade guides
  • Head pressure controlled by a hydraulic cylinder
  • Power switch with safety key prevents accidental start up
  • CSA/CUS: Following strict guidelines and electrical requirements, this JET saw is CSA/CUS certifield
  • Blade is fully guarded for Operator safety
$3,678.57
$3,059.00
  • Heavy duty construction reduces vibration and deflection
  • CSA/US: Following strict guidelines and electrical requirements, this JET Saw is CSA/US certified
  • Automatic blade breakage sensor detects accidental breakage and interrupts the power
  • Blade is fully guarded for operator safety
  • Auto shut off at the end of the cut
$15,182.86
$12,599.00
On Sale
Image of Jet HVBS-712, 7" x 12" Horizontal / Vertical Bandsaw 414559
  • 9" x 12" work table in the vertical position
  • Improved Height and width of stand with built-in storage cabinet and chip tray
  • Adjustable material stop for repeatability
  • CSA/CUS : Following strict guidelines and electrical requirements, this JET Saw is CSA/CUS certified
  • Blade drive is a belt to sealed, hardened and ground gear drive system
$1,780.00
$1,349.00
On Sale
Image of Jet HBS-56S, 5" x 6" Horizontal Mitering Bandsaw 414457
  • For added safety, the HVBS-56S follows strict guidelines and electrical requirements to be certified by CSA Group
  • Blade drive is a sealed, steel, heat treated worm driving a bronze worm gear in an oil bath
  • Mitering head swivels to cut any angle 0° - 60° while the work piece remains secured
  • Ball bearing supported blade wheel
  • Fully adjustable hydraulic downfeed system
$1,165.71
$879.00
  • Mitering head swivels to cut any angle 0° - 45° while the work piece remains secured
  • Large , easy-to-read scale for accurate positioning of the saw head
  • Fully adjustable hydraulic downfeed with separate on/off control valve
  • Large hand wheel and built-in gauge provides easy blade tensioning
  • Carbide blade guides with roller bearings
$8,387.14
$6,929.00
On Sale
Image of Jet HVBS-56 5" x 6"  Horizontal/Vertical Bandsaw 414458
  • For added safety, the HVBS-56M follows strict guidelines and electrical requirements to be certified by CSA Group
  • Heavy-Duty 14-gauge steel stand with shelf has been redesigned for stability, rigidity and ease of use.
  • Blade drive is a sealed, steel, heat treated worm driving a bronze worm gear in an oil bath
  • Handle and wheels for easy movement
  • Ball bearing supported blade wheel
On Sale
Image of Jet HBS-916, 9" x 16" Horizontal Bandsaw 414468
  • Proprietary oversized chip tray design minimizes over spray and reduces clean up
  • Quick-positioning vise with fully adjustable jaws, swivels to 45°
  • Large hand wheel and built-in gauge provides easy blade tensioning
  • Blade is fully guarded, regardless of blade guide position
  • Carbide blade guides feature parallel double-row ball bearing support
$4,571.43
$3,479.00
On Sale
Image of Jet HBS-916EVS, 9" x 16" EVS (Electronic Variable Speed) Horizontal Bandsaw 424469
  • Electronicly controled blade speed from 82 - 330 SFPM
  • Proprietary oversized chip tray design minimizes over spray and reduces clean up
  • Large hand wheel and built-in gauge provides easy blade tensioning
  • Quick-positioning vise with fully adjustable jaws, swivels to 45°
  • Blade is fully guarded, regardless of blade guide position
$5,785.71
$4,399.00
  • Heavy-duty geared head transmission for quick speed changes
  • Heavy-duty cast iron saw bow and head
  • Hardened and ground worm gear
  • Large 8" wheels and handle for easy movement
  • Quick-positioning vise swivels to 45°, reducing set up time
$2,515.71
$2,099.00
On Sale
Image of Jet J-8201K, 14"  Metal/Wood Vertical Bandsaw 414500
  • For added safety, the J-8201K follows strict guidelines and electrical requirements to be certified by CSA Group
  • Solid one piece steel base for extra stability
  • Conveniently located on/off switch
  • Gear box design allows wood/metal model saws to be used for a wider variety of metal, wood, non-ferrous metal and plastic cutting applications
  • Miter gauge
$1,964.29
$1,499.00
On Sale
Image of Jet HBS-814GH, 8" x 14" Horizontal Geared Head Bandsaw 414466
  • Hardened and ground drive shaft and worm gears transmit maximum torque to blade wheels
  • Heavy-duty geared head transmission for quick speed changes
  • Fully adjustable hydraulic downfeed system
  • Easily accessible saw control panel
  • Quick-positioning vise with fully adjustable jaws, swivels to 45°
$3,321.43
$2,559.00
  • Built in, self propelled blade brush prevents chip build up in blade guides
  • Head pressure controlled by a hydraulic cylinder
  • Power switch with safety key prevents accidental start up
  • CSA/CUS: Following strict guidelines and electrical requirements, this JET saw is CSA/CUS certifield
  • Blade is fully guarded for Operator safety
$4,694.29
$3,869.00
  • Heavy-duty bandsaw, can handle large production pieces on its extra-large table
  • Multi-tilting worktable
  • Easy to read blade tension indicator
  • Variable speeds provide proper adjustments for high efficiency cutting
  • Bi-Metal blade welder, grinder and cutter
$5,565.71
$4,599.00
  • Semi-Automatic bow raises after cut is complete to a predetermined height
  • Fully adjustable hydraulic downfeed controls the rate of decent
  • Quick-positioning vise lessons set-up time
  • Cleaning hose and nozzle assist in washing chips away
  • Easy access chip tray allows quick cleanup
$14,985.71
$12,399.00