Electric Hoists

  • Layout
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
$6,552.00
$4,110.20
As low as $133/mo
View Details
Norco 115V Single Phase Electro/Hydraulic Pump “Z” Series 910019B at Elite Metal Tools
Norco 115V Single Phase Electro/Hydraulic Pump “Z” Series 910019B
  • Usable Oil Capacity (Cu. In.): 462
  • Current Draw (Amps): 20
  • Thread Connection (NPT): 3/8”-18
  • Valve Type: Advance/Retract
$7,126.15
$3,975.00
As low as $129/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS025-020 104013 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS025-020 104013
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
$5,982.00
$3,752.18
As low as $121/mo
View Details
Jet JLH-50-10, 1/2-Ton Compact Lever Hoist With 10' Lift 181510 at Elite Metal Tools
Jet JLH-50-10, 1/2-Ton Compact Lever Hoist With 10' Lift 181510
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
$452.00
$295.80
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-275-10 110100 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-275-10 110100
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$2,710.00
$1,732.00
As low as $56/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$2,950.00
$1,885.00
As low as $61/mo
View Details
Jet JLH-50-15, 1/2-Ton Compact Lever Hoist With 15' Lift 181515 at Elite Metal Tools
Jet JLH-50-15, 1/2-Ton Compact Lever Hoist With 15' Lift 181515
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
$500.00
$326.40
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS018-010 104000 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS018-010 104000
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
$5,516.00
$3,459.68
As low as $112/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS018-020 104002 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS018-020 104002
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
$5,656.00
$3,547.43
As low as $115/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 15' Lift | JSH-550-15 110515 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 15' Lift | JSH-550-15 110515
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$3,174.00
$2,026.00
As low as $65/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-275-20 110120 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-275-20 110120
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$3,162.00
$2,015.00
As low as $65/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS025-010 104011 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS025-010 104011
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
$5,888.00
$3,693.68
As low as $120/mo
View Details
Jet JLH-25-5, 1/4-Ton Compact Lever Hoist With 5' Lift 181205 at Elite Metal Tools
Jet JLH-25-5, 1/4-Ton Compact Lever Hoist With 5' Lift 181205
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
$385.00
$251.99
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS050-010 104022 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS050-010 104022
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
$6,798.00
$4,263.99
As low as $138/mo
View Details
Jet JLH-25-15, 1/4-Ton Compact Lever Hoist With 15' Lift 181215 at Elite Metal Tools
Jet JLH-25-15, 1/4-Ton Compact Lever Hoist With 15' Lift 181215
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
$472.00
$308.04
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-550-20 110520 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-550-20 110520
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$3,476.00
$2,224.99
As low as $72/mo
View Details
Jet JLH-25-10, 1/4-Ton Compact Lever Hoist With 10' Lift 181210 at Elite Metal Tools
Jet JLH-25-10, 1/4-Ton Compact Lever Hoist With 10' Lift 181210
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
$424.00
$276.42
View Details
Jet JLH-50-5, 1/2-Ton Compact Lever Hoist With 5' Lift 181505 at Elite Metal Tools
Jet JLH-50-5, 1/2-Ton Compact Lever Hoist With 5' Lift 181505
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
$411.00
$259.08
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 15' Lift | JSH-275-15 110115 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 15' Lift | JSH-275-15 110115
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$3,061.00
$1,956.99
As low as $63/mo
View Details