Brand
Country of Origin
Shipping Method

Accessories

Jet JBC-5, 5-Ton Beam Clamp 252750 at Elite Metal Tools
Jet JBC-5, 5-Ton Beam Clamp 252750
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Larger, thicker diameter pins for increased durability and life
  • Load tested to 125% of capacity with certificate
MSRP: $515.89
$316
View Details
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185 at Elite Metal Tools
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduce bump firing to while still allowing for high-speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,162.39
$2,415
As low as $78.48/mo
View Details
Jet JG-75A, 3/4 Ton Grip Puller with Cable 286575K at Elite Metal Tools
Jet JG-75A, 3/4 Ton Grip Puller with Cable 286575K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $964.69
$619
As low as $20.11/mo
View Details
MPI Single Wave 1 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-10SW at Elite Metal Tools
MPI Single Wave 1 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-10SW
  • Main Operating Voltage: 200-460V
  • Main Operating Frequency: 50/60Hz
  • Operating Temperature: 32-122°F
  • Maximum Relative Humidity: 90%
MSRP: $3,025
$2,820
As low as $91.65/mo
View Details
Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410 at Elite Metal Tools
Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410
  • 10' Power cord length to match an electric hoist with 10' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
  • Compatible with VOLT Series Hoist and Trolley combinations
  • Backed by our industry leading 2-Year Warranty
$110
View Details
Jet PBC-415AEH, VFD 4-Button Control Pendant 15' Cord 162415 at Elite Metal Tools
Jet PBC-415AEH, VFD 4-Button Control Pendant 15' Cord 162415
  • 15' Power cord length to match an electric hoist with 15' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
  • Compatible with VOLT Series Hoist and Trolley combinations
  • Backed by our industry leading 2-Year Warranty
$119
View Details
Jet MT300-4, 3 Ton Two Speed Electric Trolley 3-Phase 460V 144189 at Elite Metal Tools
Jet MT300-4, 3 Ton Two Speed Electric Trolley 3-Phase 460V 144189
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $5,229.39
$2,998
As low as $97.43/mo
View Details
Jet 10-PT, 10-Ton Heavy Duty Manual Trolley 252060 at Elite Metal Tools
Jet 10-PT, 10-Ton Heavy Duty Manual Trolley 252060
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $2,946.89
$1,738
As low as $56.48/mo
View Details
Jet JBC-3, 3-Ton Beam Clamp 252730 at Elite Metal Tools
Jet JBC-3, 3-Ton Beam Clamp 252730
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Larger, thicker diameter pins for increased durability and life
  • Load tested to 125% of capacity with certificate
MSRP: $416.89
$275
View Details
Jet PBC-430CN, 4 Button Control Pendant 30' Cord 152431 at Elite Metal Tools
Jet PBC-430CN, 4 Button Control Pendant 30' Cord 152431
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • 4 button controller for electric hoist or trolley feature 4-pin quick connect plugs
  • Complies with NEMA 4X standards
  • NEMA 4x-rated control pendant
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $288.19
$197
View Details
MPI Full Wave 4 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-40DW at Elite Metal Tools
MPI Full Wave 4 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-40DW
  • Main Operating Voltage: 200-460V
  • Main Operating Frequency: 50/60Hz
  • Operating Temperature: 32-122°F
  • Maximum Relative Humidity: 90%
MSRP: $10,128
$9,305
As low as $302.41/mo
View Details
Jet HD-3T, 3-Ton Wide Beam Clamp 202730 at Elite Metal Tools
Jet HD-3T, 3-Ton Wide Beam Clamp 202730
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Load tested to 125% of capacity with certificate
  • Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility
MSRP: $261.79
$199
View Details
Jet 3-Ton 5/8" Wire Rope 66 Feet 286529 at Elite Metal Tools
Jet 3-Ton 5/8" Wire Rope 66 Feet 286529
  • 5/8" diameter
MSRP: $413.59
$275
View Details
MPI Full Wave 2 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-20DW at Elite Metal Tools
MPI Full Wave 2 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-20DW
  • Main Operating Voltage: 200-460V
  • Main Operating Frequency: 50/60Hz
  • Operating Temperature: 32-122°F
  • Maximum Relative Humidity: 90%
MSRP: $5,689
$5,245
As low as $170.46/mo
View Details
Jet 3-PT, 3-Ton Heavy Duty Manual Trolley 252030 at Elite Metal Tools
Jet 3-PT, 3-Ton Heavy Duty Manual Trolley 252030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $1,075.79
$705
As low as $22.91/mo
View Details
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 230V 140183 at Elite Metal Tools
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 230V 140183
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
  • TAA approved
MSRP: $3,930.29
$2,255
As low as $73.28/mo
View Details
MPI Single Wave 4 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-40SW at Elite Metal Tools
MPI Single Wave 4 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-40SW
  • Main Operating Voltage: 200-460V
  • Main Operating Frequency: 50/60Hz
  • Operating Temperature: 32-122°F
  • Maximum Relative Humidity: 90%
MSRP: $8,297
$7,660
As low as $248.95/mo
View Details
MPI Full Wave 1 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-10DW at Elite Metal Tools
MPI Full Wave 1 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-10DW
  • Main Operating Voltage: 200-460V
  • Main Operating Frequency: 50/60Hz
  • Operating Temperature: 32-122°F
  • Maximum Relative Humidity: 90%
MSRP: $4,290
$3,975
As low as $129.18/mo
View Details
MPI Single Wave 2 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-20SW at Elite Metal Tools
MPI Single Wave 2 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-20SW
  • Main Operating Voltage: 200-460V
  • Main Operating Frequency: 50/60Hz
  • Operating Temperature: 32-122°F
  • Maximum Relative Humidity: 90%
MSRP: $4,838
$4,480
As low as $145.60/mo
View Details