Searching thousands of products...

  • Layout
Steelmax MAX Lifter 4400lbs Lifting Capacity Permanent Lifting Magnet SM-ML-2000 at Elite Metal Tools
Steelmax MAX Lifter 4400lbs Lifting Capacity Permanent Lifting Magnet SM-ML-2000
  • Max Plate Load: 4400 lbs
  • Min Plate Thickness: 2”
  • Max Round Stock Load: 1760 lbs
  • Min Round Stock Thickness: 1-3/8”
$5,685
As low as $184.76/mo
View Details
Jet SkyHyker SKY25 25ft Material Jobsite Lift with 2,000 lb Lift Capacity JT1-595 at Elite Metal Tools
Jet SkyHyker SKY25 25ft Material Jobsite Lift with 2,000 lb Lift Capacity JT1-595
  • Min mast height in load position: 137”
  • Mast T-bar width: 35”
  • Base Dims: 60” x 60”
  • Caster size: 6” 
MSRP: $14,881.99
$8,499.99
As low as $276.24/mo
View Details
Bartell Global SG10 Walk Behind Green Concrete Saw SG10K at Elite Metal Tools
Bartell Global SG10 Walk Behind Green Concrete Saw SG10K
  • Blade Size: 10”
  • Blade Speed: 6000 rpm
  • Cutting Depth: 3.25”
  • Engine: Kohler 7hp
MSRP: $3,410
$3,069
As low as $99.74/mo
View Details
Bartell Global 18" Walk Behind Saw with Water Kit BSS18H39W at Elite Metal Tools
Bartell Global 18" Walk Behind Saw with Water Kit BSS18H39W
  • Max. Blade Diameter: 18”
  • Max. Blade Shaft Speed: 2600 rpm
  • Max. Cutting Depth (18” [457mm] Blade): 6 5/8”
  • Engine: Honda GX390
MSRP: $4,780
$4,302
As low as $139.81/mo
View Details
IMER Combicut 200VA 8” Tile Saw with 1.75 HP 110V Motor 1188084 at Elite Metal Tools
IMER Combicut 200VA 8” Tile Saw with 1.75 HP 110V Motor 1188084
  • Blade diameter: 8"
  • Motor rating: 1.75 h.p. 110v, 15 amp
  • Blade speed: 2.800 r.p.m.
  • Max. cutting depth: 2 ¾"
MSRP: $1,699
$1,599
As low as $51.96/mo
View Details
IMER Combicut 350 iPower 14” Stone and Paver Saw 4 HP 220V Motor 1188931 at Elite Metal Tools
IMER Combicut 350 iPower 14” Stone and Paver Saw 4 HP 220V Motor 1188931
  • Blade diameter 14"
  • Max. cutting length - includes the plunge 48"
  • Motor speed 2,800
  • Cutting table dimensions 55" x 27.5"
MSRP: $3,999
$3,799
As low as $123.46/mo
View Details
IMER USA Masonry 750 Plus 7.5HP 220V Three Phase Masonry Saw 1188864 at Elite Metal Tools
IMER USA Masonry 750 Plus 7.5HP 220V Three Phase Masonry Saw 1188864
  • Blade Diameter: 30”
  • Blade Shaft Diameter: 1”
  • Max. Cutting Length – Includes the Plunge: 18 / 27”
  • Blade Speed: 1700 rpm
MSRP: $7,949
$6,799
As low as $220.96/mo
View Details
IMER Masonry 350 Smart 14” Brick/Block Saw with 2 HP 110V Single Phase Motor 1188975 at Elite Metal Tools
IMER Masonry 350 Smart 14” Brick/Block Saw with 2 HP 110V Single Phase Motor 1188975
  • Blade diameter: 14"
  • Max. cutting length (w/plunge cut): 26" (30")
  • Cutting table dimensions: 20” x 16”
  • Motor speed: 2,850 r.p.m.
MSRP: $2,999
$2,799
As low as $90.96/mo
View Details
IMER Masonry 750 Plus 20-30” Block and Brick Precast Saw 7.5 HP 220V Single Phase 1188863 at Elite Metal Tools
IMER Masonry 750 Plus 20-30” Block and Brick Precast Saw 7.5 HP 220V Single Phase 1188863
  • Blade diameter / Blade shaft diameter: 30” / 1”
  • Max cutting length (w/plunge): 12"
  • Blade speed: 1700 r.p.m.
  • Water pan capacity: 9 gal.
MSRP: $7,949
$6,799
As low as $220.96/mo
View Details
IMER Combicut 250VA 10” Tile & Stone Saw 1.75 HP 110V Motor with 31" Cut 1188164 at Elite Metal Tools
IMER Combicut 250VA 10” Tile & Stone Saw 1.75 HP 110V Motor with 31" Cut 1188164
  • Blade diameter  10"
  • Blade shaft diameter  5/8"
  • Blade speed  2.800 r.p.m
  • Max. cutting depth  3 ¾" 
MSRP: $1,999
$1,899
As low as $61.71/mo
View Details
IMER Combicut 250VA/1000 10” Tile & Stone Saw 1.75 HP 110V Motor with 40" Cut 1188174 at Elite Metal Tools
IMER Combicut 250VA/1000 10” Tile & Stone Saw 1.75 HP 110V Motor with 40" Cut 1188174
  • Blade diameter 10"
  • Blade speed 2.800 r.p.m.
  • Max. cutting length (w/plunge cut) 37" (40")
  • Water pump flow 3 g.p.m.

 

MSRP: $2,699
$2,499
As low as $81.21/mo
View Details
IMER Combicut 250VA / 1500 10" Tile & Stone Saw 1.75 HP 110V Motor with 60" Cut 1188180 at Elite Metal Tools
IMER Combicut 250VA / 1500 10" Tile & Stone Saw 1.75 HP 110V Motor with 60" Cut 1188180
  • Blade diameter 10"
  • Blade shaft diameter 5/8"
  • Max. cutting length (w/plunge cut) 57" (60")
  • Max. cutting depth 3 ¾"
MSRP: $2,999
$2,799
As low as $90.96/mo
View Details
Jet JLH Series 3/4 Ton Lever Hoist, 10' Lift with Overload Protection 376101 at Elite Metal Tools
Jet JLH Series 3/4 Ton Lever Hoist, 10' Lift with Overload Protection 376101
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $687.99
$475
View Details
Jet JLH Series 3/4 Ton Lever Hoist, 20' Lift with Overload Protection 376103 at Elite Metal Tools
Jet JLH Series 3/4 Ton Lever Hoist, 20' Lift with Overload Protection 376103
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $789.99
$535
As low as $17.38/mo
View Details
Jet JLH Series 3/4 Ton Lever Hoist, 15' Lift with Overload Protection 376102 at Elite Metal Tools
Jet JLH Series 3/4 Ton Lever Hoist, 15' Lift with Overload Protection 376102
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $737.99
$509
As low as $16.54/mo
View Details
Norco 115V Single Phase Electro/Hydraulic Pump “Z” Series 910019B at Elite Metal Tools
Norco 115V Single Phase Electro/Hydraulic Pump “Z” Series 910019B
  • Usable Oil Capacity (Cu. In.): 462
  • Current Draw (Amps): 20
  • Thread Connection (NPT): 3/8”-18
  • Valve Type: Advance/Retract
MSRP: $8,436.92
$4,599
As low as $149.46/mo
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS200-010 104044 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS200-010 104044
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $13,162.99
$7,340
As low as $238.55/mo
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $14,137.99
$7,840
As low as $254.80/mo
View Details
Jet 20-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-2000WO-20 102000 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-2000WO-20 102000
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $11,370.99
$6,445
As low as $209.46/mo
View Details
Jet 1-Ton Electric Chain Hoist 3-Phase 20' Lift | 1SS-3C-20 132000 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 3-Phase 20' Lift | 1SS-3C-20 132000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,617.99
$3,219
As low as $104.61/mo
View Details
Jet 3SS-1C-20, 3-Ton Electric Chain Hoist 1-Phase 20' Lift 312000 at Elite Metal Tools
Jet 3SS-1C-20, 3-Ton Electric Chain Hoist 1-Phase 20' Lift 312000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $9,333.99
$5,195
As low as $168.83/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | 1SS-1C-20 112000 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | 1SS-1C-20 112000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $6,639.99
$3,795
As low as $123.33/mo
View Details
Jet 2SS-1C-20, 2-Ton Electric Chain Hoist 1-Phase 20' Lift 212000 at Elite Metal Tools
Jet 2SS-1C-20, 2-Ton Electric Chain Hoist 1-Phase 20' Lift 212000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $7,794.99
$4,395
As low as $142.83/mo
View Details
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000 at Elite Metal Tools
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $6,907.99
$3,945
As low as $128.21/mo
View Details