Searching thousands of products...

• Max. Cutting Range (W x H) – 11.8” x 2.75” OR 5.9” x 3.9” with 18” Blade
• Saw Spindle Speed: 3200 RPM
• Feed Motor (Servo Motor): 2.7HP
• Max. Feed Speed: Variable to 262 ft/min

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Precision ground components
• Rear mounted lever action
• Specially designed for each model
• Uses 5C collets

• Adjustable Material Stop
• Automatic blade shut off switch stops the sawing process
• Built-in, self-propelled chip brush prevents chip build up in blade guides
• Dual mitering allows for compound angle cutting of 60° right and 45° left
• Heavy-duty construction reduces vibration and deflection

• Attaches quickly and securely into place
• Included Equipment: Material hold down, Extra Lower Blade Holder, Onboard Dust Blower
• Large 11-5/8” x 21”, 1/4” thick steel table provides a stable working surface while also limiting vibration
• Removable dust port on underside of table to collect dust at the source
• Slotted table for easier and quicker blade changes

• Precision ground components
• Rear mounted lever action
• Specially designed for each model
• Uses 5C collets
• 30 x 7 x 7 in

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• 10° Inclusive cutting capacity
• Mounts to predrilled and tapped holes
• Specially designed for each model
• 26.6 x 12.7 x 9.8 in
• Attachment length 18 in

• Cutting Capacity (Thickness x Width): 2″x33″, 4″x31″, 6″x29″, 8”x25”, 10”x20”, 12”x12”
• Cycle Speed: 10-15 strokes/min
• Cycle Operation: Pneumatic
• Saw Blade Size: 36”

• Cutting Capacity (Thickness x Width): 2″x33″, 4″x31″, 6″x29″, 8”x25”, 10”x20”, 12”x12”
• Cycle Speed: 10-15 strokes/min
• Cycle Operation: Pneumatic
• Saw Blade Size: 36”

• 100 Series model frames are forged of superior quality steels
• Forged square head spindle with rolled thread. Black oxide coating for added strength
• Perma-Pads® are standard and are also black-oxide coated
• Recommended for heavy industrial and construction job site demands, the heavy-duty models are some of the toughest products available for their weight to strength ratio

• 100 Series model frames are forged of superior quality steels
• Forged square head spindle with rolled thread. Black oxide coating for added strength
• Perma-Pads® are standard and are also black-oxide coated
• Recommended for heavy industrial and construction job site demands, the heavy-duty models are some of the toughest products available for their weight to strength ratio

• 100 Series model frames are forged of superior quality steels
• Forged square head spindle with rolled thread. Black oxide coating for added strength
• Perma-Pads® are standard and are also black-oxide coated
• Recommended for heavy industrial and construction job site demands, the heavy-duty models are some of the toughest products available for their weight to strength ratio

• 100 Series model frames are forged of superior quality steels
• Forged square head spindle with rolled thread. Black oxide coating for added strength
• Perma-Pads® are standard and are also black-oxide coated
• Recommended for heavy industrial and construction job site demands, the heavy-duty models are some of the toughest products available for their weight to strength ratio

• Saw blade size: 14”
• Cutting capacity (thickness x width): 1” x 10”/ 2” x 9” / 3” x 8”
• Saw blade speed: 4100 RPM
• Motor: 5 HP

• Saw blade size: 18”
• Cutting capacity (thickness x width): 2” x 12”/ 3” x 11” / 4” x 10”
• Saw blade speed: 3200 RPM
• Motor: 10 HP IE3

• Saw blade size: 20” / 22” / 24” (standard)
• Cutting capacity (thickness x width): 2” x 21”/ 4” x 19” / 6” x 15” / 8” x 8”
• Saw blade speed: 2400 RPM
• Motor: 15 HP IE3

• Saw blade size: 14”
• Cutting capacity (thickness x width): 1” x 10”/ 2” x 9” / 3” x 8”
• Saw blade speed: 4100 RPM
• Motor: 5 HP

• Saw blade size: 18”
• Cutting capacity (thickness x width): 2” x 12”/ 3” x 11” / 4” x 10”
• Saw blade speed: 3200 RPM
• Motor: 10 HP IE3

• Saw blade size: 20” / 22” / 24” (standard)
• Cutting capacity (thickness x width): 2” x 21”/ 4” x 19” / 6” x 15” / 8” x 8”
• Saw blade speed: 2400 RPM
• Motor: 15 HP IE3

• Compatible with JET 350017
• Compatible with JET 350018
• Compatible with JET 350020
• Heavy-Duty Mill Drill stand
• With locking height adjustment

• Cutting Capacity (Thickness x Width): 1″ x 10″, 2″ x 9″, 3″ x 8″
• Cycle Speed: 95 strokes/min
• Cycle Operation: Air
• Saw Blade Size: 14″

• Cutting Capacity (Thickness x Width): 2″ x 12″, 3″ x 11″, 4″ x 10″
• Cycle Speed: 45 strokes/min
• Cycle Operation: Air
• Saw Blade Size (Optional): 18″