Palmgren

  • Max Load Horizontal: 310 lbs.
  • Max Load Vertical: 133 lbs.
  • Gear Ratio: 90 to 1 in
  • Center Hole: MT-4
MSRP: $3,745
$3,042.81
As low as $98.89/mo

  • Spindle Taper: MT 6
  • Number of Spindle Speeds: 8
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-5
MSRP: $11,867
$11,125.31
As low as $361.57/mo

  • Capacity Cast Iron: 9/16 in
  • RPM: 120-3605
  • Spindle Taper: MT3
  • Spindle Travel: 5 in
$1,975
As low as $64.18/mo

  • Spindle Taper: MT 5
  • Number of Spindle Speeds: 8 or 16
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-4
MSRP: $17,333
$16,249.69
As low as $321.58/mo

  • Parallel arm with 8" to 55" reach
  • Torque @ 90 PSI: 30 ft/lb.
  • Max Tap Capacity/Mold Steel: 5/8
  • Max Tap Capacity/Aluminum: 3/4
MSRP: $2,933
$2,749.69
As low as $89.36/mo

  • Swing Over Bed: 22"
  • Distance Between Centers: 80"
  • Spindle Taper: MT7
  • Spindle Bore: 4-1/8"
MSRP: $38,667
$36,250.31
As low as $717.39/mo

  • Torque @ 90 PSI: 27 ft/lb
  • Air Consumption: 24 CFM
  • Max Tap Capacity/Mold Steel: 1/2
  • Max Tap Capacity/Aluminum: 9/16
MSRP: $2,133
$1,999.69
As low as $64.98/mo

  • Total Length Of Bed: 60"
  • Spindle Nose Mounting: Camlock D1-4
  • Spindle Bore: 1-9/16"
  • Max. Size Cutting Tool: 1/2"
$20,000
As low as $395.80/mo

  • Ram Size: 10"
  • Throat Capacity: 19" x 12"
  • Largest Arbor Extension: 10"
  • Maximum Work Diameter: 19.5" x 19.5"
MSRP: $3,929
$3,437.88
As low as $111.73/mo

  • Motor RPM: 400
  • Torque @ 90 PSI: 27 ft/lb
  • Max Tap Capacity/Mold Steel: 1/2
  • Max Tap Capacity/Aluminum: 9/16
MSRP: $2,533
$2,374.69
As low as $77.17/mo

  • Industrial grade capacitor motors
  • Dust Collection HP: 1.5
  • CFM: 472
  • Dust Container Volume: 110 Cubic Inches
$1,775
As low as $57.68/mo

  • Height at 0 degrees: 5.32 in
  • Gear Ratio: 90 to 1
  • Max Load Horizontal: 265 lbs.
  • Max Load Vertical: 132 lbs.
MSRP: $2,012
$1,665
As low as $54.11/mo

  • Voltage: 120/240
  • Amps: 10/5 A
  • Capacity Cast Iron: 5/8 in
  • RPM: 138-3476
$1,299
As low as $42.21/mo

  • Heavy duty loading capacity of up to 6,600 lbs.
  • Moves material forward or backward using manual controls
  • Can make minor material movements using material jog controls
  • 9 rollers all move in unison for smooth material movements
$15,746
As low as $311.61/mo

  • Voltage: 120/240
  • Amps: 10/5 A
  • Capacity Cast Iron: 9/16 in
  • RPM: 120-3605
$1,799
As low as $58.46/mo

  • Spindle Taper: MT 5
  • Number of Spindle Speeds: 8 or 16
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-4
MSRP: $17,333
$16,249.69
As low as $321.58/mo

  • Volts: 115/230V
  • Amps AC: 12.5/6.25
  • Disc Speed: 1720 RPM
  • Belt SFPM: 2258 SFPM
MSRP: $2,660
$2,493.75
As low as $81.04/mo

  • Table Diameter: 10 in
  • Travel (X x Y): 4 x 4 in
  • Base (X x Y): 9 x 5 in
  • Height at 0 degrees: 5- 3/4 in
MSRP: $1,871
$1,520.19
As low as $49.40/mo

  • Table Tilt: 45° Left, 15° Right
  • Throat Depth: 20 in
  • Electric Welder: 4.2 KVA
  • Grinder Motor: 1/8 HP
$9,625
As low as $312.81/mo

  • Drilling capacity in steel: Ø 1.103 in
  • Quill Travel: 4.134 in
  • Number of pulley steps: 16 steps
  • Distance spindle - table (max.): 33.858 in
MSRP: $3,200
$3,000
As low as $97.50/mo

  • Length: 19-1/4 in
  • Dust Collection HP: 1.5
  • CFM: 472
  • Dust Container Volume: 110 Cubic Inches
MSRP: $1,733
$1,675
As low as $54.43/mo

  • Top Grad.: 360 in
  • Base Keyway: 5/8 in
  • Gear Ratio: 40:1
  • Table T-slots: 5/8 in
MSRP: $1,569
$1,274.81
As low as $41.43/mo

  • Top Grad.: 360 in
  • Base Keyway: 5/8 in
  • Gear Ratio: 40:1
  • Table T-slots: 5/8 in
MSRP: $1,492
$1,212.25
As low as $39.39/mo

  • Heavy duty cast iron and steel construction provides superior stiffness and vibration dampening
  • Fully automatic on demand hydraulic controls for the saw head, shuttle vise and split-jaw clamping vise
  • Adjustable clamping pressure
  • Auto shut off at end of material or after preset number of cuts
$45,000
As low as $890.55/mo

Founded in 1919 and since then have been creating superior quality machines for their customers. Palmgren is located in Naperville, IL. They use innovative designs and patents to improve their metalworking machines. Some of the many machines that they sell include belt grinders, drill sharpeners, and finishing machines. 

If you are interested in belt grinders or anything else Palmgren has to offer, please contact us. Here at Elite Metal Tools we work as a team to provide our customers with the best customer service and low prices.