Kalamazoo Industries

  • Wheel: 20” or 22” (Not included)
  • Spindle: 1”
  • RPM: 2500
  • Capacities: 4″ solids, 6″ most shapes. At 45 deg: 3″ solids, 5″ most shapes.
$15,574
As low as $308.20/mo
  • 20" Manual Wet-Cut Abrasive Saw 
  • Cast Iron Arm, Trunnions 
  • Integral Tank And Pump 
  • 15 HP Motor
MSRP: $17,000
$16,622
As low as $328.94/mo
  • Comes with stand and chain vise
  • 3450 RPM, 4400 spindle RPM.
  • 5HP TEFC motor 3 phase 220/440 volt
  • Made in the USA
$2,973
As low as $96.62/mo
  • Miters 45 Degree Left and 60 Degree Right
  • Non-Ferrous Saw
  • Dual Cam-Lock Vises
  • 5/8" Spindle Arbor
$2,699
As low as $87.71/mo
  • Capacity 4" Solid, 6" Shapes 
  • Air Chain Vise 
  • Cast iron Upper Arm/Trunnions 
  • 20 HP Motor
MSRP: $18,800
$18,382
As low as $363.77/mo
  • 12" Disc Sander
  • Vacuum Base Included
  • Table Tilts 45 Degree and up to 90 Degree
  • 1HP Motor
MSRP: $1,965
$1,903
As low as $61.84/mo
  • Dia. contact wheel: 8″
  • Platens: 24″
  • Reversible steel platen: 24-1/2″
  • Mounted on DCV-6 dust collector – 400 CFM
MSRP: $5,600
$5,370
As low as $174.52/mo
  • Wheel: 20” or 22” (Not included)
  • Spindle: 1”
  • RPM: 2500
  • Capacities: 4″ solids, 6″ most shapes. At 45 deg: 3″ solids, 5″ most shapes.
$13,898
As low as $451.68/mo
  • USA Made
  • 3" x 90" Belt
  • Multi-Position Horizontal through Vertical

 

$3,071
As low as $99.80/mo
  • 6" x 90" Belt Grinder
  • USA MADE!
  • 6" x 24" Platen
  • VACUUM IS SOLD SEPARATELY
MSRP: $6,800
$6,321
As low as $205.43/mo
  • OSHA safety clamshell wheel guard
  • 1" spindle, sealed ball bearings
  • Two easy-set screw vises to hold work on both sides
  • Options: #12L steel stand and AV-18 air vises
MSRP: $3,500
$3,321
As low as $107.93/mo
  • Comes with stand and chain vise
  • 3450 RPM, 4400 spindle RPM.
  • 5HP TEFC motor,1phase 220v 
  • Made in the USA
$3,223
As low as $104.74/mo
  • 10" Disc Sander
  • 4" x 36" Belt Sander
  • 1/2HP 1Phase, 115Volts
  • Made in the U.S.A
$1,428
As low as $46.41/mo
  • Capacity: 1 .5″ solids, 2 1/2″ pipe
  • 5/8″ arbor, sealed-for-life bearings,10″ abrasive wheel, 3 HP
  • Available in 1 ph 110/220 or 3 ph 220/440
  • Swivel cam vise opens 4″ – fast, lever-lock. Work length stop

 

$1,906
As low as $61.94/mo
  • 4″ x 36″ belt sander with dust collector, cord, and switch
  • 1 HP,1 phase 110 volt 3450 RPM
  • Vertical or Horizontal position
  • Dimensions: 50″ high x 12″ deep x 14″ wide
MSRP: $1,840
$1,785
As low as $58.01/mo
  • 4″ x 36″ belt sander with dust collector, cord, and switch
  • 1/2 HP,1 phase 110 volt (1 HP available) 3450 RPM
  • Dimensions: 50″ high x 12″ deep x 14″ wide
  • 3615 SFPM, 120 LBS
$1,625
As low as $52.81/mo
  • 10" High speed nonferrous saw for cutting aluminum, brass and plastic
  • 3.25" round solid capacity
  • Uses high speed carbide tipped blade (non included)
  • Single quick release cam-lock vise
MSRP: $1,995
$1,918
As low as $62.33/mo
  • Swivel cam vise opens 4″ – fast, lever-lock. Work length stop
  • Capacity: 1 .5″ solids, 2 1/2″ pipe
  • 5/8″ arbor, sealed-for-life bearings,10″ abrasive wheel, 3 HP
  • Available in 1 ph 110/220 or 3 ph 220/440
$1,989
As low as $64.64/mo
  • 10" Disc Sander
  • Vacuum Included
  • 1/2 HP Motor
  • Made in the USA
$1,470
As low as $47.77/mo
  • 10″ disc sander with 4″ x 36″ belt sander
  • With full boxed OSHA guard, Horizontal or vertical belt position
  • 1/2 HP 1PH TEFC motor , 115 volts, 1 ph, 7.4 amps, 230 volt, 1 ph, 3.7 amps
  • Factory wired at 115 volt, 1 phase, 8 ft. 3 prong plug standard
$1,449
As low as $47.09/mo
  • 10″x90″ belt, 3400 SFPM
  • 10HP, 3phase, TEFC motor. Magnetic controls with jog switch
  • Table Tilt 45 deg. down, 15 deg. up
  • Dimensions: L46″ x W30″ x H35″
$12,194
As low as $396.30/mo
  • Spindle Arbor Size: 1”
  • Spindle RPM: 2500
  • Capacities: 4″ solid, 6″ shapes@ 90 degrees, 3″ solid, 5″ shapes@ 45 degrees Left OR Right
  • 20HP unit amp draws: 220V 46 amps and 440V 23 amps
$12,456
As low as $404.82/mo
  • Grinder amp draws: 3PH 230V 11.8 amps
  • Dust collector amp draws: 3PH 230V 2.8 amps
  • Belt speed: 6900 SFPM
  • Grinder switch: Magnetic on/off switch
MSRP: $6,700
$6,303
As low as $204.84/mo
  • Grinder 3PH amps draws: 2.8 amps
  • Vacuum 3PH FLA: 2.8 amps
  • SFPM: 5400
  • 3″ and 1.5″ serrated contact wheels on rotating platen
MSRP: $4,450
$4,270
As low as $138.77/mo

Founded in 1883 this company has become a well known brand across the United States with their high quality machines. Kalamazoo Industries is located in Kalamazoo, MI. They strive to give the customers the best machines that are durable and ready to take on any task in the woodworking industries. They sell products such as belt sander, industrial belts, and abrasive saws.

If you are interested in saws or anything else Kalamazoo Industries has to offer, please contact us. At Elite Metal Tools we offer low prices and work together in order to provide you with great customer service.