Kalamazoo Industries

  • 4" x 48" Belt
  • 4" x 10" Work Space
  • 7200 SFPM
  • 110 or 220V
MSRP: $2,250
$2,142
As low as $69.61/mo

  • 1PH 110V FLA: 12.8 amps
  • Total Weight Capacity: 500 lbs. (media and material)
  • Deburring and Polishing
  • Steel tub w/ cast urethane lining
$6,417
As low as $208.55/mo

  • 2" x 48" belt, multi-position belt sander
  • 4500 SFPM
  • Tilt table and removeable platen
MSRP: $649
$631
As low as $20.50/mo

  • 24" Horizontal Disc Sander
  • 5HP
  • Heavy Duty Base
  • Made in the U.S.A
MSRP: $5,250
$5,141
As low as $167.08/mo

  • 2" x 48" Belt Grinder
  • 1/2HP Motor
  • 7225 SFPM
  • Multi-Position Grinder From Vertical to Horizontal
MSRP: $1,300
$1,180
As low as $38.35/mo

  • 20" dia. Steel Disc Uses PSA Adhesive Sanding Discs, 1 Included
  • Reversing Drum Switch 
  • USA Motors 
  • Tilt Table With Mitre Gage, Tilts 45 Degrees Down, Raises and Lowers 6" 
$3,798
As low as $123.43/mo

  • Motor and stand not included
  • Cast iron frame, Full OSHA safety guard
  • 6″ x 48″ belt, variable position, direct drive, 1 lever quick belt release!!!
  • Cast iron work table 6″ x 10″ with 1/2″ x 1/8″ slot
MSRP: $1,975
$1,899
As low as $61.71/mo

  • Steel platen 14-1/2″ x 36″
  • Air tension on belt, 0-55 PSI reqd.
  • 20 HP, 3 PH TEFC
  • Dimensions: L 64″ x W 31″ x H 35″
$20,693
As low as $409.51/mo

  • All-purpose- for wood, metal and plastics
  • 3450 RPM  motor, 3600 SFPM
  • 4″ x 36″ belt with full OSHA guard
  • Preset spring belt tension
MSRP: $875
$822
As low as $26.71/mo

  • Mount to your bench, fixture
  • One knob tracking, sanding belt is spring tensioned
  • V belt drive
  • Wt: 115 lbs
MSRP: $1,350
$1,304
As low as $42.38/mo

  • IN STOCK READY TO SHIP!!!
  • Tilt table- vertical sander only
  • 1" x 42" belt
  • 4" drive wheel
  • 1800 SFPM

 

 


  • 3400 SFPM
  • Air tension on belt, 0-55 PSI reqd.
  • 20 HP, 3 PH TEFC
  • Dimensions: L 64″ x W 31″ x H 35″
$22,071
As low as $436.78/mo

  • Put your spare motors to work. Any 1/2 HP to 1 HP 3450, rpm motor will work
  • Mount to your bench, fixture
  • One knob tracking, sanding belt is spring tensioned
  • 35 lbs
MSRP: $950
$872
As low as $28.34/mo

  • This model includes the vacuum base dust collector
  • Quick change belt, pre-tensioned one lever belt change
  • 100% Made in USA!
  • Multi-position horizontal/vertical
$3,434
As low as $111.60/mo

  • All-purpose- for wood, metal and plastics
  • Vertical or Horizontal position, 4″ x6″ cast iron platen
  • pre-set spring belt tension
  • Dimensions: W18″ x H17″ x D 7″
MSRP: $825
$779
As low as $25.31/mo

  • 10″x90″ belt, 3400 SFPM
  • Steel platen-10″x29″
  • Table Tilt 45 deg. down, 15 deg. up
  • Dimensions: L46″ x W30″ x H35″
$13,692
As low as $444.99/mo

  • Stand Not Included 
  • 3 hp, 3 phase, 220 volt
  • Reversible platen 6 1/2″ x 14″
  • 6″ x 48″ belt, variable position, direct drive, 1 lever quick belt release!!!
MSRP: $2,395
$2,253
As low as $73.22/mo

  • 3 hp , 3 phase w/ vacuum
  • Belt sander with heavy-duty enclosed stand and vacuum dust collector
  • Quick one lever abrasive belt changing!
  • Dimensions: L 27″ x W 18″ x H 52″
MSRP: $3,495
$3,374
As low as $109.65/mo

  • Stand Not Included
  • 3hp, 1 phase, 110 or 220 volt
  • Reversible platen 6 1/2″ x 14″
  • 3 HP motor 3450 RPM, 1 phase, manual switch, 3500 SFPM
MSRP: $2,395
$2,253
As low as $73.22/mo

  • 4″ x 36″ wet benchtop belt sander
  • 1/2 hp, 110 vac, TEFC motor
  • self contained coolant tank & pump
  • Dimensions: L20″ x W 20″ x H 12″
MSRP: $3,050
$2,875
As low as $93.43/mo

  • 2 x 2"x48" Belt Sanders
  • Combination Sander
  • Vertical or Horizontal Position
  • 1/2 HP
$1,470
As low as $47.77/mo

  • 12" Aluminum Disc, 5/8" Arbor 
  • Optional MG12 Mitre Gauge 
  • Tilt Table 
  • Heavy-Duty, All Steel. USA Made 
$1,210
As low as $39.32/mo

  • 1 phase/220, 3 phase/220 or 3 phase/440 motor options
  • 100% made in the USA!!
  • Belt sander- multi-position horizontal/vertical
  • Quick change belt, pre-tensioned one lever belt change.. FAST!
$3,224
As low as $104.78/mo

  • 4″ x60″ belt, 3 hp 1 phase or 3 phase motor, Magnetic 24 volt switch
  • Heavy stand, pre set belt tension, one lever belt change
  • Flood coolant – 10 gal tank, 1/3 hp pump, splash guards
  • Dimensions: L 36″ x W 24″ x H 63″
$3,756
As low as $122.07/mo

Founded in 1883 this company has become a well known brand across the United States with their high quality machines. Kalamazoo Industries is located in Kalamazoo, MI. They strive to give the customers the best machines that are durable and ready to take on any task in the woodworking industries. They sell products such as belt sander, industrial belts, and abrasive saws.

If you are interested in saws or anything else Kalamazoo Industries has to offer, please contact us. At Elite Metal Tools we offer low prices and work together in order to provide you with great customer service.