JET

  • Layout
Jet JTM-1050VS2 Mill With Newall DP700 3-Axis (Knee) DRO and X-Axis Powerfeed 691236 at Elite Metal Tools
Jet JTM-1050VS2 Mill With Newall DP700 3-Axis (Knee) DRO and X-Axis Powerfeed 691236
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $24,000
$19,499
As low as $385.88/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-275-20 110120 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-275-20 110120
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $3,162
$2,015
As low as $65.48/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894144 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894144
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $30,909.43
$25,159
As low as $497.89/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698139 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698139
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $33,108.57
$26,949
As low as $533.32/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and Servo X, Y, Z-Axis Powerfeeds 894191 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and Servo X, Y, Z-Axis Powerfeeds 894191
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,403.71
$31,259
As low as $618.61/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894118 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894118
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,381.43
$28,799
As low as $569.93/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds 698116 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds 698116
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $31,609.71
$25,729
As low as $509.17/mo
View Details
Jet 15-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-1500WO-15 109115 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-1500WO-15 109115
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $6,042
$3,854.58
As low as $125.27/mo
View Details
Jet JLH-300-20PSH 3 Ton Lever Hoist, 20' Lift with Overload Protection & Shipyard Hooks 376903 at Elite Metal Tools
Jet JLH-300-20PSH 3 Ton Lever Hoist, 20' Lift with Overload Protection & Shipyard Hooks 376903
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,536
$1,004.99
As low as $32.66/mo
View Details
Jet TS300-230-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140116K at Elite Metal Tools
Jet TS300-230-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140116K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $14,324
$8,984
As low as $291.98/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and Servo X-Axis Powerfeed and USA Air Powered Draw Bar 894194 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and Servo X-Axis Powerfeed and USA Air Powered Draw Bar 894194
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,750
$29,099
As low as $575.86/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X Powerfeed & Air Power Drawbar 698133 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X Powerfeed & Air Power Drawbar 698133
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $32,187.14
$26,199
As low as $518.47/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X & Y Powerfeeds 698134 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X & Y Powerfeeds 698134
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $31,572.86
$25,699
As low as $508.58/mo
View Details
Jet JET — Lathe Mat for ZH Series, 001-B Top 322190 at Elite Metal Tools
Jet JET — Lathe Mat for ZH Series, 001-B Top 322190
$157
View Details
Jet JLH-600WO-15 6 Ton Lever Hoist, 15' Lift with Overload Protection 376602 at Elite Metal Tools
Jet JLH-600WO-15 6 Ton Lever Hoist, 15' Lift with Overload Protection 376602
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $2,250
$1,473.99
As low as $47.90/mo
View Details
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X-Axis Powerfeed and Air Powered Drawbar 690635 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X-Axis Powerfeed and Air Powered Drawbar 690635
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,694.29
$23,899
As low as $472.96/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894138 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894138
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,801.43
$26,699
As low as $528.37/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO & X Powerfeed 698144 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO & X Powerfeed 698144
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $30,086.29
$24,489
As low as $484.63/mo
View Details
Jet JET — Replacement Carbide Circular Saw Blade, 350 x 32 x 3.4mm, 108T for NF- CK350 579064 at Elite Metal Tools
Jet JET — Replacement Carbide Circular Saw Blade, 350 x 32 x 3.4mm, 108T for NF- CK350 579064
  • Carbide tipped cold steel
  • Nonferrous
  • 350 x 32 x 3.4mm
  • 108 teeth
MSRP: $737.45
$655
As low as $21.28/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X, Y-Axis Powerfeeds 894207 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X, Y-Axis Powerfeeds 894207
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,487.14
$29,699
As low as $587.74/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and Servo X-Axis Powerfeed and USA Air Powered Draw Bar 894182 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and Servo X-Axis Powerfeed and USA Air Powered Draw Bar 894182
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,398.57
$27,999
As low as $554.10/mo
View Details
Jet 1/2-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-050-15 133052 at Elite Metal Tools
Jet 1/2-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-050-15 133052
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $640
$449
View Details
Jet JLH-25-5, 1/4-Ton Compact Lever Hoist With 5' Lift 181205 at Elite Metal Tools
Jet JLH-25-5, 1/4-Ton Compact Lever Hoist With 5' Lift 181205
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $385
$251.99
View Details
Jet JLH-900WO-5 9 Ton Lever Hoist, 5' Lift with Overload Protection 376700 at Elite Metal Tools
Jet JLH-900WO-5 9 Ton Lever Hoist, 5' Lift with Overload Protection 376700
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $3,263
$2,142.99
As low as $69.64/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.