Category
Country of Origin

JET

Jet JTM-2 Mill With Newall DP500 DRO With X-Axis Powerfeeds 692194 at Elite Metal Tools
Jet JTM-2 Mill With Newall DP500 DRO With X-Axis Powerfeeds 692194
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,406.53
$15,766
As low as $312.00/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO & X Powerfeed 698144 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO & X Powerfeed 698144
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $35,137.07
$27,721
As low as $548.59/mo
View Details
Jet JET — Replacement Outer Filter for IAFS-1700 415106 at Elite Metal Tools
Jet JET — Replacement Outer Filter for IAFS-1700 415106
MSRP: $256.73
$234
View Details
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X-Axis Powerfeed and Air Powered Drawbar 690635 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X-Axis Powerfeed and Air Powered Drawbar 690635
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,461.45
$27,233
As low as $538.94/mo
View Details
Jet E-1236VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892322 at Elite Metal Tools
Jet E-1236VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892322
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $31,623.45
$25,180
As low as $498.31/mo
View Details
Jet JAT-103, 1/2" Impact Wrench 505103 at Elite Metal Tools
Jet JAT-103, 1/2" Impact Wrench 505103
  • Adjustable power regulator for variable forward power
  • Aluminum construction
  • Lightweight aluminum construction
  • Lightweight aluminum construction reduces weight
  • Twin Hammer Impact Mechanism
MSRP: $329.99
$236
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 15' Lift | JSH-550-15 110515 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 15' Lift | JSH-550-15 110515
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $4,077.69
$2,371
As low as $77.05/mo
View Details
Jet JLH-600WO-5 6 Ton Lever Hoist, 5' Lift with Overload Protection 376600 at Elite Metal Tools
Jet JLH-600WO-5 6 Ton Lever Hoist, 5' Lift with Overload Protection 376600
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $2,273.69
$1,395
As low as $45.33/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO, X, Y & Z Powerfeeds 698065 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO, X, Y & Z Powerfeeds 698065
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $39,596.80
$30,947
As low as $612.44/mo
View Details
Jet JLH-150-20PSH 1-1/2 Ton Lever Hoist, 20' Lift with Overload Protection & Shipyard Hooks 376803 at Elite Metal Tools
Jet JLH-150-20PSH 1-1/2 Ton Lever Hoist, 20' Lift with Overload Protection & Shipyard Hooks 376803
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,134.09
$740
As low as $24.05/mo
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds and Air Powered Drawbar 690523 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds and Air Powered Drawbar 690523
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,731.72
$27,395
As low as $542.14/mo
View Details
Jet JTM-1254RVS with X, Y & Z Powerfeeds 698088 at Elite Metal Tools
Jet JTM-1254RVS with X, Y & Z Powerfeeds 698088
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $33,245.07
$26,325
As low as $520.97/mo
View Details
Jet JCT-3643, 3" Stroke, Hex Shank, Open Handle Chipping Hammer 550643 at Elite Metal Tools
Jet JCT-3643, 3" Stroke, Hex Shank, Open Handle Chipping Hammer 550643
  • Comes with standard type retainer
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
  • Open style forged handle is engineered to dissipate the impact energy more efficiently, reducing user fatigue and increasing safety
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,097.79
$717
As low as $23.30/mo
View Details
Jet JET — Replacement Blade, Bimetal, 1.33 x 0.043 x 192-1/8 5/8T for ECB-1422V 891165 at Elite Metal Tools
Jet JET — Replacement Blade, Bimetal, 1.33 x 0.043 x 192-1/8 5/8T for ECB-1422V 891165
  • 1.33" Width
  • 0.043" Thickness
  • 192-1/8" Length
  • 5/8T
$415
View Details
Jet JLP-075A-20, 3/4 Ton Lever Hoist with 20' Lift 287303 at Elite Metal Tools
Jet JLP-075A-20, 3/4 Ton Lever Hoist with 20' Lift 287303
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $602.79
$429
View Details
Jet JLH-25-5, 1/4-Ton Compact Lever Hoist With 5' Lift 181205 at Elite Metal Tools
Jet JLH-25-5, 1/4-Ton Compact Lever Hoist With 5' Lift 181205
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $439.99
$289
View Details
Jet 1-1/2-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-150WO-30 201130 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-150WO-30 201130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $1,350.79
$850
As low as $27.62/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds 698136 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds 698136
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,650.80
$30,260
As low as $598.84/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698137 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698137
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $42,164.53
$32,805
As low as $649.21/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds & Air Power Drawbar 698058 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds & Air Power Drawbar 698058
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $39,461.72
$30,850
As low as $610.52/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds 894168 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds 894168
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,137.45
$31,335
As low as $620.11/mo
View Details
Jet JLH Series 3/4 Ton Lever Hoist, 10' Lift with Overload Protection 376101 at Elite Metal Tools
Jet JLH Series 3/4 Ton Lever Hoist, 10' Lift with Overload Protection 376101
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $756.79
$522
As low as $16.96/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-275-20 110120 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-275-20 110120
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $4,058.99
$2,361
As low as $76.73/mo
View Details
Jet JLP-150A-5, 1-1/2 Ton Lever Hoist with 5' Lift 287400 at Elite Metal Tools
Jet JLP-150A-5, 1-1/2 Ton Lever Hoist with 5' Lift 287400
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $620.39
$455
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.