JET

  • Layout
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 690636 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 690636
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,959.99
$24,595
As low as $486.73/mo
View Details
Jet Replacement Blade, Bimetal, 1.33" x 0.043" x 192-1/8 4/6T for ECB-1422V 891164 at Elite Metal Tools
Jet Replacement Blade, Bimetal, 1.33" x 0.043" x 192-1/8 4/6T for ECB-1422V 891164
  • 1.33" Width
  • 0.043" Thickness
  • 192-1/8" Length
  • 4/6T
$415
View Details
Jet JVM-836-3 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691186 at Elite Metal Tools
Jet JVM-836-3 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691186
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,517.09
$15,775
As low as $312.18/mo
View Details
Jet JTM-1050VS2 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691206 at Elite Metal Tools
Jet JTM-1050VS2 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691206
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee
  • Heavy duty motor drive
MSRP: $28,072.79
$21,695
As low as $429.34/mo
View Details
Jet JTM-1254RVS with X Powerfeed & Air Power Drawbar 698085 at Elite Metal Tools
Jet JTM-1254RVS with X Powerfeed & Air Power Drawbar 698085
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $27,188.29
$21,050
As low as $416.57/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | 1/2SS-1C-20 121200 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | 1/2SS-1C-20 121200
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,390.99
$3,115
As low as $101.23/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment 892416 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment 892416
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $34,154.29
$26,865
As low as $531.65/mo
View Details
Jet GH-1860ZX With ACU-RITE 303 DRO With Taper Attachment 321591 at Elite Metal Tools
Jet GH-1860ZX With ACU-RITE 303 DRO With Taper Attachment 321591
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $60,199.99
$46,895
As low as $928.05/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698054 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698054
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,611.39
$28,629
As low as $566.56/mo
View Details
Jet E-1440VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892464 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892464
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,611.39
$28,630
As low as $566.58/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $32,925.69
$25,979
As low as $514.12/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203(Quill) DRO 894116 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203(Quill) DRO 894116
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $31,758.59
$25,135
As low as $497.42/mo
View Details
Jet JAT-103, 1/2" Impact Wrench 505103 at Elite Metal Tools
Jet JAT-103, 1/2" Impact Wrench 505103
  • Adjustable power regulator for variable forward power
  • Aluminum construction
  • Lightweight aluminum construction
  • Lightweight aluminum construction reduces weight
  • Twin Hammer Impact Mechanism
MSRP: $299.99
$215
View Details
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698081 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698081
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,488.59
$28,540
As low as $564.80/mo
View Details
Jet TS300-230-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140117K at Elite Metal Tools
Jet TS300-230-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140117K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $16,809.99
$9,349
As low as $303.84/mo
View Details
Jet JLH Series 3/4 Ton Lever Hoist, 20' Lift with Overload Protection 376103 at Elite Metal Tools
Jet JLH Series 3/4 Ton Lever Hoist, 20' Lift with Overload Protection 376103
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $789.99
$535
As low as $17.38/mo
View Details
Jet JLP-150A-5SH, 1-1/2 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287700 at Elite Metal Tools
Jet JLP-150A-5SH, 1-1/2 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287700
  • All steel construction
  • Impact resistant all steel construction for added durability and protection
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $578.99
$425
View Details
Jet GH-1880ZX With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 321599 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 321599
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $78,628.59
$59,995
As low as $1,187.30/mo
View Details
Jet 1-1/2-Ton Hand Chain Hoist with 30' Lift | S90-150-30 101923 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 30' Lift | S90-150-30 101923
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $811.99
$545
As low as $17.71/mo
View Details
Jet ET — Replacement Ferrous Circular Saw Blade, 350 x 32 x 5mm, 180T for FK350 579039 at Elite Metal Tools
Jet ET — Replacement Ferrous Circular Saw Blade, 350 x 32 x 5mm, 180T for FK350 579039
  • HSS Steam tempered steel
  • 62/64 HRc
  • 350 x 32 x 5mm
  • 180 teeth
  • 2 pin holes are 11mm diameter / 63mm on center
MSRP: $700.29
$635
As low as $20.63/mo
View Details
Jet TS050-230-015,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140234K at Elite Metal Tools
Jet TS050-230-015,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140234K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $10,746.99
$5,910
As low as $192.07/mo
View Details
Jet 20-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-2000WO-20 102000 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-2000WO-20 102000
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $11,370.99
$6,445
As low as $209.46/mo
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 690090 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 690090
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,114.29
$16,895
As low as $334.35/mo
View Details
Jet JLH-50-15, 1/2-Ton Compact Lever Hoist With 15' Lift 181515 at Elite Metal Tools
Jet JLH-50-15, 1/2-Ton Compact Lever Hoist With 15' Lift 181515
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $531.99
$325
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.