JET

  • Layout
Jet Aloris BXA Intro-Pro Set for Elite E-1340VS Lathe 892093 at Elite Metal Tools
Jet Aloris BXA Intro-Pro Set for Elite E-1340VS Lathe 892093
  • #1 Turning and facing holder
  • Specifically designed for Elite E-1340VS and E-1440VS Lathes
  • Super Precision Tool Post
MSRP: $1,202.73
$1,054
As low as $34.25/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698141 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698141
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,137.45
$31,833
As low as $629.97/mo
View Details
Jet PBC-430CN, 4 Button Control Pendant 30' Cord 152431 at Elite Metal Tools
Jet PBC-430CN, 4 Button Control Pendant 30' Cord 152431
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • 4 button controller for electric hoist or trolley feature 4-pin quick connect plugs
  • Complies with NEMA 4X standards
  • NEMA 4x-rated control pendant
  • Push button controller with cable strain relief system for durability and reliability
MSRP: $288.19
$197
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO X & Y Powerfeeds 698051 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO X & Y Powerfeeds 698051
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,083.07
$28,854
As low as $571.02/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds & Air Power Drawbar 698117 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds & Air Power Drawbar 698117
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $39,326.53
$31,237
As low as $618.18/mo
View Details
Jet E-1236VS With ACU-RITE 303 DRO With Collet Closer 892313 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 DRO With Collet Closer 892313
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $30,001.72
$23,567
As low as $466.39/mo
View Details
Jet 1-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-100-10 133110 at Elite Metal Tools
Jet 1-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-100-10 133110
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $701.79
$525
As low as $17.06/mo
View Details
Jet 5-Ton Hand Chain Hoist with 20' Lift | S90-500-20 101952 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 20' Lift | S90-500-20 101952
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,653.29
$1,036
As low as $33.67/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690640 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar 690640
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,407.45
$28,358
As low as $561.20/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691208 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691208
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $27,974.53
$22,078
As low as $436.92/mo
View Details
Jet JTM-949EVS with Newall DP700 DRO, X & Y Powerfeeds & Air Power Drawbar 690538 at Elite Metal Tools
Jet JTM-949EVS with Newall DP700 DRO, X & Y Powerfeeds & Air Power Drawbar 690538
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,596.53
$27,746
As low as $549.09/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894134 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894134
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,705.07
$33,720
As low as $667.31/mo
View Details
Jet JLP-150A-15SH, 1-1/2 Ton Lever Hoist, 15' Lift & Shipyard Hooks 287702 at Elite Metal Tools
Jet JLP-150A-15SH, 1-1/2 Ton Lever Hoist, 15' Lift & Shipyard Hooks 287702
  • All steel construction
  • Impact resistant all steel construction for added durability and protection
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $749.09
$506
As low as $16.44/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 DRO & X Powerfeed 698126 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 DRO & X Powerfeed 698126
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,191.07
$27,464
As low as $543.51/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698054 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698054
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,272.53
$31,932
As low as $631.93/mo
View Details
Jet JCT-1601, Benchtop Sand Rammer 550601 at Elite Metal Tools
Jet JCT-1601, Benchtop Sand Rammer 550601
  • All Steel cylinder housing for increased durability
  • Fast powerful blows for compacting small, medium, and large sand molds
  • Front end seal protects the piston from excessive dirt and debris extending tool life
  • Heavy-Duty, industry proven valve design
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,173.69
$755
As low as $24.53/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 690540 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 690540
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,596.26
$23,269
As low as $460.49/mo
View Details
Jet E-1236VS With Taper Attachment and Collet Closer 892302 at Elite Metal Tools
Jet E-1236VS With Taper Attachment and Collet Closer 892302
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $30,542.26
$23,965
As low as $474.26/mo
View Details
Jet JCT-1602, Benchtop Sand Rammer 550602 at Elite Metal Tools
Jet JCT-1602, Benchtop Sand Rammer 550602
  • All Steel cylinder housing for increased durability
  • Fast powerful blows for compacting small, medium, and large sand molds
  • Front end seal protects the piston from excessive dirt and debris extending tool life
  • Heavy-Duty, industry proven valve design
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,596.09
$995
As low as $32.33/mo
View Details
Jet JET — Replacement Blade, Bimetal, 1.61" x .051" x 240" 3/4VT for ECB-1833DMEVS Band Saw 891172 at Elite Metal Tools
Jet JET — Replacement Blade, Bimetal, 1.61" x .051" x 240" 3/4VT for ECB-1833DMEVS Band Saw 891172
  • 1.61" Width
  • .051" Thickness
  • 240" Length
  • 3/4VT
MSRP: $527
$500
As low as $16.25/mo
View Details
Jet JHJ-17-1/2L, 17-1/2-Ton Low Profile Hydraulic Bottle Jack 453318K at Elite Metal Tools
Jet JHJ-17-1/2L, 17-1/2-Ton Low Profile Hydraulic Bottle Jack 453318K
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $393.79
$262
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690548 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690548
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $36,083.07
$28,854
As low as $571.02/mo
View Details
On Sale
Jet 3-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-300-10 133310 at Elite Metal Tools
Jet 3-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-300-10 133310
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,458.59
Was: $999
Now: $649.35
As low as $21.10/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690543 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690543
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,542.53
$28,457
As low as $563.16/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.