JET

Jet JAT-620, 3/8" Reversible Air Drill 505620

Impact resistant composite housing reduces tool weight, improving balance and reduces user fatigue
Industrial Jacobs’s keyed chuck efficiently transfers torque when needed
Rugged, ball-bearing design for durability
Sealed ball bearing design keeps out contaminants promoting smooth operation
Side-mounted, forward/reverse switch for quick and easy direction changes

MSRP: ~~$333.99~~

$230

View Details

Jet JTM-1254RVS with ACU-RITE 203 DRO X & Y Powerfeeds 698110

Adjustable gibs throughout
Dual locks on all moveable surfaces
Heavy-duty spindle brake
Precision bored and honed milling head
Precision hardened and ground ways and table

MSRP: ~~$32,679.99~~

$25,799

As low as $510.56/mo

View Details

Jet TS300-460-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144011K

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments
5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads

MSRP: ~~$15,609.99~~

$8,595

As low as $279.33/mo

View Details

Jet JET — Replacement Inner Filter for IAFS 3000 Air Filtration Systems 415157

MSRP: ~~$368.59~~

$325

View Details

Jet JTM-1 Mill With ACU-RITE 203 DRO , X and Y-Axis Powerfeeds 690161

Heavy duty splined motor drive
Internal coolant tank built into base for use with coolant system (Coolant pump not included)
Large Diameter quill is chromed
One shot lubrication system
Precision bored and honed milling head

MSRP: ~~$21,254.29~~

$16,295

As low as $322.47/mo

View Details

Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 690540

Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
Dual locks on all moveable surfaces
Spindle head is internally cooled extending bearing, belt and motor life
Swing away control box houses an e-stop and puts all controls at the operators fingertips

MSRP: ~~$26,905.69~~

$20,849

As low as $412.60/mo

View Details

Jet 2SS-1C-10, 2-Ton Electric Chain Hoist 1-Phase 10' Lift 211000

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

MSRP: ~~$7,552.99~~

$4,269

As low as $138.74/mo

View Details

Jet JCT-1601, Benchtop Sand Rammer 550601

All Steel cylinder housing for increased durability
Fast powerful blows for compacting small, medium, and large sand molds
Front end seal protects the piston from excessive dirt and debris extending tool life
Heavy-Duty, industry proven valve design
Backed by the industry leading 2-Year Warranty

MSRP: ~~$1,066.99~~

$685

As low as $22.26/mo

View Details

Jet Stand Extension for Jet JWL-1221VS Lathe 719203A

$210

View Details

Jet 1-1/2-Ton Hand Chain Hoist with 15' Lift | S90-150-15 101921

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

MSRP: ~~$567.99~~

$415

View Details

Jet TS200-460-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144009K

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

MSRP: ~~$15,348.99~~

$8,465

As low as $275.11/mo

View Details

Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 690547

Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
Dual locks on all moveable surfaces
Spindle head is internally cooled extending bearing, belt and motor life
Swing away control box houses an e-stop and puts all controls at the operators fingertips

MSRP: ~~$30,099.99~~

$23,195

As low as $459.02/mo

View Details

Jet JLH-900WO-20 9 Ton Lever Hoist, 20' Lift with Overload Protection 376703

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

MSRP: ~~$4,444.99~~

$2,535

As low as $82.38/mo

View Details

Jet PBC-430CN, 4 Button Control Pendant 30' Cord 152431

24 volt push button controller with cable strain relief system for durability and reliability
4 button controller for electric hoist or trolley feature 4-pin quick connect plugs
Complies with NEMA 4X standards
NEMA 4x-rated control pendant
Push button controller with cable strain relief system for durability and reliability

MSRP: ~~$261.99~~

$195

View Details

Jet 1/4-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-250WO-15 101225

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

MSRP: ~~$557.99~~

$415

View Details

Jet 3-Ton 5/8" Wire Rope 66 Feet 286529

5/8" diameter

MSRP: ~~$375.99~~

$245

View Details

Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690160

Adjustable gibs throughout
Chrome lead screws on X and Y axis
Chrome-plated motor shaft with bearing support at end
Hardened and ground square vertical knee ways and cross ways
Heavy duty motor drive

MSRP: ~~$28,994.29~~

$22,395

As low as $443.19/mo

View Details

Jet JTM-1254RVS with NEWALL DP700 DRO & X Powerfeed 698126

Adjustable gibs throughout
Dual locks on all moveable surfaces
Heavy-duty spindle brake
Precision bored and honed milling head
Precision hardened and ground ways and table

MSRP: ~~$31,082.79~~

$24,659

As low as $488.00/mo

View Details

Jet TS200-460-010, 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144007K

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

MSRP: ~~$13,675.99~~

$7,599

As low as $246.96/mo

View Details

Jet JTM-4VS Mill With Newall DP700 DRO With X-Axis Powerfeed and Power Draw Bar 690069

Adjustable gibs throughout
Heavy duty splined motor drive
Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
Large Diameter quill is chromed
One shot lubrication system

MSRP: ~~$24,079.99~~

$18,895

As low as $373.93/mo

View Details

Jet 2-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-200-10 133210

Extra large hand chain opening for side chain pulling
Sealed housing to provide extra protection against the elements
Complies with ANSI/ASME B30.16 and HAST-2 Standards
Cast steel safety latches
Dual pawl Weston style brake

MSRP: ~~$989.99~~

$645

As low as $20.96/mo

View Details

Jet GH-1640ZX With Newall DP700 DRO With Taper Attachment 321148

Articulating LED work lamp
Centrally located controls with jog button
Electronic Chuck Key Holder
Five position automatic carriage stop increases productivity
Full length splash guard and coolant return

MSRP: ~~$56,821.39~~

$44,495

As low as $880.55/mo

View Details

Jet JTM-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691188

Heavy duty splined motor drive
Internal coolant tank built into base for use with coolant system (Coolant pump not included)
Large Diameter quill is chromed
One shot lubrication system
Precision bored and honed milling head

MSRP: ~~$20,639.99~~

$15,850

As low as $313.67/mo

View Details

Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690543

Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
Dual locks on all moveable surfaces
Spindle head is internally cooled extending bearing, belt and motor life
Swing away control box houses an e-stop and puts all controls at the operators fingertips

MSRP: ~~$32,311.39~~

$25,595

As low as $506.52/mo

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.