Category
Country of Origin

JET

Jet JTM-1254VS with NEWALL DP700 DRO & X Powerfeed 698067 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 DRO & X Powerfeed 698067
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,191.07
$27,037
As low as $535.06/mo
View Details
Jet JLP-150A-15SH, 1-1/2 Ton Lever Hoist, 15' Lift & Shipyard Hooks 287702 at Elite Metal Tools
Jet JLP-150A-15SH, 1-1/2 Ton Lever Hoist, 15' Lift & Shipyard Hooks 287702
  • All steel construction
  • Impact resistant all steel construction for added durability and protection
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $749.09
$506
As low as $16.44/mo
View Details
Jet 3SS-3C-10, 3-Ton Electric Chain Hoist 3-Phase 10' Lift 331000 at Elite Metal Tools
Jet 3SS-3C-10, 3-Ton Electric Chain Hoist 3-Phase 10' Lift 331000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $9,018.89
$5,128
As low as $166.66/mo
View Details
Jet Stand Extension for Jet JWL-1221VS Lathe 719203A at Elite Metal Tools
Jet Stand Extension for Jet JWL-1221VS Lathe 719203A
$231
View Details
Jet JET — DA Aloris Set for 26 in ZX Lathes 650290 at Elite Metal Tools
Jet JET — DA Aloris Set for 26 in ZX Lathes 650290
  • Advanced design provides built-in quick tool changing, versatility with positive rigidity to meet the most exacting working tolerances.
  • Includes super precision tool post, #1 and #2 tool holders
MSRP: $2,702.80
$2,198
As low as $71.43/mo
View Details
Jet 1-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-100WO-20 203120 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-100WO-20 203120
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $832.69
$550
As low as $17.87/mo
View Details
Jet JTM-1254RVS with Newall DP700 DRO X Powerfeed and Air Power Drawbar 698127 at Elite Metal Tools
Jet JTM-1254RVS with Newall DP700 DRO X Powerfeed and Air Power Drawbar 698127
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,623.72
$28,797
As low as $569.89/mo
View Details
Jet JAT-452, 7" Angle Grinder 505452 at Elite Metal Tools
Jet JAT-452, 7" Angle Grinder 505452
  • Ergonomically Designed Grip
  • Grinding wheel not included
  • Lightweight composite handle
  • Precision spiral bevel gears transfer torque and speed to spindle for added durability
  • Rugged, ball-bearing design for durability
MSRP: $785.39
$545
As low as $17.71/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690549 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690549
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,339.80
$27,868
As low as $551.50/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS050-015 140234 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS050-015 140234
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $7,925.49
$4,483
As low as $145.69/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed 690629 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed 690629
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $38,921.07
$30,459
As low as $602.78/mo
View Details
On Sale
Jet 15-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-1500WO-10 109110 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-1500WO-10 109110
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $5,992.79
Was: $3,499
Now: $2,099.40
As low as $68.23/mo
View Details
Jet 1-1/2-Ton Hand Chain Hoist with 20' Lift | S90-150-20 101922 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 20' Lift | S90-150-20 101922
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $691.89
$489.50
View Details
Jet JET — CA Aloris Set for 18 in ZX Lathes 650280 at Elite Metal Tools
Jet JET — CA Aloris Set for 18 in ZX Lathes 650280
  • Advanced design provides built-in quick tool changing, versatility with positive rigidity to meet the most exacting working tolerances.
  • Includes super precision tool post, #1 and #2 tool holders
MSRP: $1,756.80
$1,474
As low as $47.90/mo
View Details
Jet JET — Replacement Ferrous Circular Saw Blade, 225 x 32 x 2mm, 180T for F225 579000 at Elite Metal Tools
Jet JET — Replacement Ferrous Circular Saw Blade, 225 x 32 x 2mm, 180T for F225 579000
  • HSS steel
  • 62-64 HRc
  • 225 x 32 x 2mm
  • 180T
  • 2 pin holes are 11mm diameter / 63mm on center
MSRP: $317.56
$279
View Details
Jet 1/4-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-250WO-20 101250 at Elite Metal Tools
Jet 1/4-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-250WO-20 101250
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $685.29
$493
View Details
Jet JLH-600WO-20 6 Ton Lever Hoist, 20' Lift with Overload Protection 376603 at Elite Metal Tools
Jet JLH-600WO-20 6 Ton Lever Hoist, 20' Lift with Overload Protection 376603
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $2,968.89
$1,775
As low as $57.68/mo
View Details
Jet 3-PT, 3-Ton Heavy Duty Manual Trolley 252030 at Elite Metal Tools
Jet 3-PT, 3-Ton Heavy Duty Manual Trolley 252030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $1,075.79
$705
As low as $22.91/mo
View Details
Jet JTM-1 Mill With Newall DP500 DRO 692187 at Elite Metal Tools
Jet JTM-1 Mill With Newall DP500 DRO 692187
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $19,190.26
$14,737
As low as $478.95/mo
View Details
Jet JLH-900WO-20 9 Ton Lever Hoist, 20' Lift with Overload Protection 376703 at Elite Metal Tools
Jet JLH-900WO-20 9 Ton Lever Hoist, 20' Lift with Overload Protection 376703
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $4,889.49
$2,799
As low as $90.96/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690544 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690544
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,069.53
$27,673
As low as $547.64/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO & X Powerfeed 698061 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO & X Powerfeed 698061
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $35,947.99
$28,308
As low as $560.21/mo
View Details
Jet JLH-900WO-15 9 Ton Lever Hoist, 15' Lift with Overload Protection 376702 at Elite Metal Tools
Jet JLH-900WO-15 9 Ton Lever Hoist, 15' Lift with Overload Protection 376702
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $4,848.79
$2,799
As low as $90.96/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,218.26
$28,503
As low as $564.07/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.