JET

  • Layout
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS050-015 140234 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS050-015 140234
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $7,925.49
$4,554
As low as $148.00/mo
View Details
Jet JET — 52 Piece CK38 Clamping Kit for 3/4 in T-Slots 660058 at Elite Metal Tools
Jet JET — 52 Piece CK38 Clamping Kit for 3/4 in T-Slots 660058
  • 58-pc Clamping Kit with Tray for 3/4" T-slots
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
MSRP: $310.85
$280
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 691170 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 691170
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $31,082.80
$25,180
As low as $498.31/mo
View Details
Jet 1-Ton Electric Chain Hoist 3-Phase 10' Lift | 1SS-3C-10 131000 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 3-Phase 10' Lift | 1SS-3C-10 131000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $6,115.99
$3,575
As low as $116.18/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894162 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894162
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,597.07
$35,110
As low as $694.82/mo
View Details
Jet JTM-949EVS with Newall DP700 DRO & X Powerfeed 690535 at Elite Metal Tools
Jet JTM-949EVS with Newall DP700 DRO & X Powerfeed 690535
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,393.53
$23,121
As low as $457.56/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 3-Phase 10' Lift | 1/2SS-3C-10 123100 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 3-Phase 10' Lift | 1/2SS-3C-10 123100
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,221.69
$2,994
As low as $97.30/mo
View Details
Jet JLH-50-10, 1/2-Ton Compact Lever Hoist With 10' Lift 181510 at Elite Metal Tools
Jet JLH-50-10, 1/2-Ton Compact Lever Hoist With 10' Lift 181510
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $530.19
$355
View Details
Jet GH-1880ZX With ACU-RITE 303 DRO With Taper Attachment 321597 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 303 DRO With Taper Attachment 321597
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $72,639.26
$56,999
As low as $1,128.01/mo
View Details
Jet 2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-200-30 133230 at Elite Metal Tools
Jet 2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-200-30 133230
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,676.39
$1,049
As low as $34.09/mo
View Details
Jet 5C Lever Type Collet Closer For ELITE EGH-1740 and EGH-1760 892156 at Elite Metal Tools
Jet 5C Lever Type Collet Closer For ELITE EGH-1740 and EGH-1760 892156
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
MSRP: $3,581.26
$2,885
As low as $93.76/mo
View Details
Jet JET — Replacement Circular Saw Blade, 225mm 120T for F225 579002 at Elite Metal Tools
Jet JET — Replacement Circular Saw Blade, 225mm 120T for F225 579002
  • HSS steel
  • 62-64 HRc
  • 225mm
  • 120T
  • 2 pin holes are 11mm diameter / 63mm on center
MSRP: $312.17
$284
View Details
Jet JTM-1050VS2 Mill With Newall DP700 DRO With X-Axis Powerfeed 691205 at Elite Metal Tools
Jet JTM-1050VS2 Mill With Newall DP700 DRO With X-Axis Powerfeed 691205
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways
  • Hardened and ground table
MSRP: $27,163.72
$21,482
As low as $425.12/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698077 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698077
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $41,218.53
$32,627
As low as $645.68/mo
View Details
Jet JTM-1050VS2 Mill With Newall DP700 3-Axis (Knee) DRO and X-Axis Powerfeed 691236 at Elite Metal Tools
Jet JTM-1050VS2 Mill With Newall DP700 3-Axis (Knee) DRO and X-Axis Powerfeed 691236
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $28,244.80
$22,276
As low as $440.84/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds 690641 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds 690641
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,731.72
$27,861
As low as $551.36/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO, X Powerfeed 698049 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO, X Powerfeed 698049
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,231.66
$27,494
As low as $544.10/mo
View Details
On Sale
Jet 15-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-1500WO-10 109110 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-1500WO-10 109110
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $5,992.79
Was: $3,499
Now: $2,029.42
As low as $65.95/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698121 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698121
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,921.07
$30,939
As low as $612.28/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed & Air Power Drawbar 698109 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed & Air Power Drawbar 698109
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,758.80
$29,351
As low as $580.85/mo
View Details
Jet 2-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-200-10 133210 at Elite Metal Tools
Jet 2-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-200-10 133210
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,088.99
$749
As low as $24.34/mo
View Details
Jet JET — Replacement Circular Saw Blade, Nonferrous, 350 x 2.5 x 32mm x 180T 579052 at Elite Metal Tools
Jet JET — Replacement Circular Saw Blade, Nonferrous, 350 x 2.5 x 32mm x 180T 579052
  • 2 Pin holes are 11mm diameter / 63mm on center
  • 2 Pin holes are 8mm diameter / 45mm on center
  • BLADE DESCRIPTION DEFINITION
  • M2 HSS Bright finish – 54/56 HRc for use on non-ferrous machines at high RPM
  • Replacement Blade for JET J-CK350 350mm x 2.5mm x 32mm x 180T Non Ferrous
MSRP: $881.09
$808
As low as $26.26/mo
View Details
Jet JTM-1254RVS with X & Y Powerfeeds 698086 at Elite Metal Tools
Jet JTM-1254RVS with X & Y Powerfeeds 698086
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $31,488.26
$25,399
As low as $502.64/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894118 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894118
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,286.07
$32,677
As low as $646.67/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.