JET

  • Layout
Jet 2-Ton Hand Chain Hoist with 20' Lift | S90-200-20 101932 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 20' Lift | S90-200-20 101932
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $829.39
$561
As low as $18.23/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894135 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds 894135
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,272.53
$31,932
As low as $631.93/mo
View Details
Jet JTM-1254VS with NEWALL DP700 DRO X Powerfeed & Air Power Drawbar 698068 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 DRO X Powerfeed & Air Power Drawbar 698068
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,623.72
$29,251
As low as $578.87/mo
View Details
Jet JLP-300A-10, 3 Ton Lever Hoist with 10' Lift 287501 at Elite Metal Tools
Jet JLP-300A-10, 3 Ton Lever Hoist with 10' Lift 287501
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $909.69
$590
As low as $19.17/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-550-20 110520 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-550-20 110520
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $4,473.69
$2,601
As low as $84.53/mo
View Details
Jet JTM-1 Mill With ACU-RITE 203 DRO and X-Axis Powerfeed 690168 at Elite Metal Tools
Jet JTM-1 Mill With ACU-RITE 203 DRO and X-Axis Powerfeed 690168
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $22,703.99
$17,703
As low as $350.34/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed 690629 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed 690629
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $38,921.07
$30,939
As low as $612.28/mo
View Details
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds 690157 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds 690157
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,595.99
$19,595
As low as $387.78/mo
View Details
Jet JET — Heat Resistant Dust Collection Hose, 2 in dia x 8 ft length, max 180 degrees 414735 at Elite Metal Tools
Jet JET — Heat Resistant Dust Collection Hose, 2 in dia x 8 ft length, max 180 degrees 414735
  • Flexible
  • For temperatures up to 180 degrees F
  • 8 ft length
  • Hose dia 2 in.
MSRP: $648.66
$605
As low as $19.66/mo
View Details
Jet 1/2-Ton Hand Chain Hoist with 30' Lift | S90-050-30 101903 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 30' Lift | S90-050-30 101903
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $619.29
$456
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 690545 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 690545
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,731.45
$23,369
As low as $462.47/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690164 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690164
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $33,920.80
$27,265
As low as $539.57/mo
View Details
Jet JVM-836-3 Mill With Newall DP700-DRO 691179 at Elite Metal Tools
Jet JVM-836-3 Mill With Newall DP700-DRO 691179
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $18,649.72
$14,572
As low as $473.59/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | 1/2SS-1C-20 121200 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | 1/2SS-1C-20 121200
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,930.09
$3,450
As low as $112.12/mo
View Details
Jet JET — Infeed Table for MBS-1323EVS 891162 at Elite Metal Tools
Jet JET — Infeed Table for MBS-1323EVS 891162
  • 7 Rollers
  • 78.7" x 25.2" Roller Capacity (LxW )
  • 27-1/2 - 30-1/8" Roller to Floor Height
  • 3968 lb. Capacity Load
  • Steel
MSRP: $3,216.39
$2,617
As low as $85.05/mo
View Details
Jet GH-1880ZX With Newall DP700 With Taper Attachment and Collet Closer 321578 at Elite Metal Tools
Jet GH-1880ZX With Newall DP700 With Taper Attachment and Collet Closer 321578
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $80,747.80
$62,826
As low as $1,243.32/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment 892416 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment 892416
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,569.72
$29,946
As low as $592.63/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 690639 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 690639
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,839.72
$26,471
As low as $523.86/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Collet Closer 892413
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,218.26
$28,953
As low as $572.97/mo
View Details
Jet Comparator Bracket for Jet JWL-1840CB Lathe 719601 at Elite Metal Tools
Jet Comparator Bracket for Jet JWL-1840CB Lathe 719601
  • Include headstock bracket, tailstock bracket, both centers, and all needed hardware
MSRP: $270.26
$245
View Details
Jet 5-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-500-15 133515 at Elite Metal Tools
Jet 5-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-500-15 133515
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $2,207.69
$1,399
As low as $45.46/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift TS050-460-015 Electric 2 Speed Trolley MT050-4 144002K at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift TS050-460-015 Electric 2 Speed Trolley MT050-4 144002K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,419.09
$6,579
As low as $213.81/mo
View Details
Jet JLH-300-10PSH 3 Ton Lever Hoist, 10' Lift with Overload Protection & Shipyard Hooks 376901 at Elite Metal Tools
Jet JLH-300-10PSH 3 Ton Lever Hoist, 10' Lift with Overload Protection & Shipyard Hooks 376901
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,545.49
$962
As low as $31.26/mo
View Details
Jet JVM-836-3 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691186 at Elite Metal Tools
Jet JVM-836-3 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691186
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $22,568.80
$17,604
As low as $348.38/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.