Category
Country of Origin

JET

Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X, Y and Z-Axis Powerfeeds 690450 at Elite Metal Tools
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X, Y and Z-Axis Powerfeeds 690450
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $32,839.72
$25,995
As low as $514.44/mo
View Details
Jet JET — 52 Piece CK38 Clamping Kit for 3/4 in T-Slots 660058 at Elite Metal Tools
Jet JET — 52 Piece CK38 Clamping Kit for 3/4 in T-Slots 660058
  • 58-pc Clamping Kit with Tray for 3/4" T-slots
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
MSRP: $310.85
$280
View Details
Jet JBC-3, 3-Ton Beam Clamp 252730 at Elite Metal Tools
Jet JBC-3, 3-Ton Beam Clamp 252730
  • Clamp jaw is designed to distribute the load away from the beam flange edge
  • Clamp jaw is designed to distribute the load away from the beam flange edge, increasing safety
  • Complies with ANSI / ASME B30.17 and B30.20 standards
  • Larger, thicker diameter pins for increased durability and life
  • Load tested to 125% of capacity with certificate
MSRP: $416.89
$275
View Details
Jet 3-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-300-30 133330 at Elite Metal Tools
Jet 3-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-300-30 133330
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $2,527.79
$1,575
As low as $51.18/mo
View Details
Jet 1/2-Ton Hand Chain Hoist with 30' Lift | S90-050-30 101903 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 30' Lift | S90-050-30 101903
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $619.29
$456
View Details
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698054 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 DRO X, Y & Z Powerfeeds & Air Power Drawbar 698054
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,272.53
$31,436
As low as $622.11/mo
View Details
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X, Y & Z Powerfeeds 698082 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 3X (Q) DRO, X, Y & Z Powerfeeds 698082
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $39,596.80
$30,947
As low as $612.44/mo
View Details
Jet E-1340VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892406 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892406
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $41,488.80
$32,316
As low as $639.53/mo
View Details
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 690636 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 690636
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,055.99
$26,939
As low as $533.12/mo
View Details
Jet JAT-651, 1,800 RPM, 1/4" Screwdriver 505651 at Elite Metal Tools
Jet JAT-651, 1,800 RPM, 1/4" Screwdriver 505651
  • Ergonomically Designed Grip
  • Fast-action chuck permits the changing of standard 1/4" hex bits
  • Heavy-duty ball bearing construction increases durability
  • Variable-speed trigger for precise speed control
  • Backed by the industry leading 2-Year Warranty
MSRP: $389.39
$269
View Details
Jet JAT-650, 800 RPM, 1/4" Screwdriver 505650 at Elite Metal Tools
Jet JAT-650, 800 RPM, 1/4" Screwdriver 505650
  • Ergonomically Designed Grip
  • Fast-action chuck permits the changing of standard 1/4" hex bits
  • Heavy-duty ball bearing construction increases durability
  • Variable-speed trigger for precise speed control
  • Backed by the industry leading 2-Year Warranty
MSRP: $325.99
$230
View Details
Jet JCT-3640, 2" Stroke, Round Shank, Open Handle Chipping Hammer 550640 at Elite Metal Tools
Jet JCT-3640, 2" Stroke, Round Shank, Open Handle Chipping Hammer 550640
  • Comes with standard type retainer
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
  • Open style forged handle is engineered to dissipate the impact energy more efficiently, reducing user fatigue and increasing safety
  • Backed by the industry leading 2-Year Warranty
MSRP: $944.89
$632
As low as $20.54/mo
View Details
Jet 5-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-500-15 133515 at Elite Metal Tools
Jet 5-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-500-15 133515
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $2,207.69
$1,399
As low as $45.46/mo
View Details
Jet 1-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-100-10 133110 at Elite Metal Tools
Jet 1-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-100-10 133110
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $701.79
$525
As low as $17.06/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690643 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690643
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $36,488.53
$28,699
As low as $567.95/mo
View Details
Jet JAT-620, 3/8" Reversible Air Drill 505620 at Elite Metal Tools
Jet JAT-620, 3/8" Reversible Air Drill 505620
  • Impact resistant composite housing reduces tool weight, improving balance and reduces user fatigue
  • Industrial Jacobs’s keyed chuck efficiently transfers torque when needed
  • Rugged, ball-bearing design for durability
  • Sealed ball bearing design keeps out contaminants promoting smooth operation
  • Side-mounted, forward/reverse switch for quick and easy direction changes
MSRP: $367.39
$253
View Details
Jet 5C Lever Type Collet Closer For ELITE EGH-1740 and EGH-1760 892156 at Elite Metal Tools
Jet 5C Lever Type Collet Closer For ELITE EGH-1740 and EGH-1760 892156
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
MSRP: $3,581.26
$2,885
As low as $93.76/mo
View Details
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402 at Elite Metal Tools
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $735.89
$499
View Details
Jet JCT-1601, Benchtop Sand Rammer 550601 at Elite Metal Tools
Jet JCT-1601, Benchtop Sand Rammer 550601
  • All Steel cylinder housing for increased durability
  • Fast powerful blows for compacting small, medium, and large sand molds
  • Front end seal protects the piston from excessive dirt and debris extending tool life
  • Heavy-Duty, industry proven valve design
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,173.69
$755
As low as $24.53/mo
View Details
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892468 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892468
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $41,083.45
$32,023
As low as $633.73/mo
View Details
Jet JTM-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691188 at Elite Metal Tools
Jet JTM-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691188
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $22,703.99
$17,395
As low as $344.24/mo
View Details
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed, Power Draw Bar and 8" Riser Block 690235 at Elite Metal Tools
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed, Power Draw Bar and 8" Riser Block 690235
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $33,109.99
$26,255
As low as $519.58/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698121 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X Powerfeed & Air Power Drawbar 698121
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,921.07
$30,459
As low as $602.78/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698066 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698066
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $42,029.45
$32,707
As low as $647.27/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.