JET

  • Layout
Jet JAT-751, 3/4" x 20-1/2" Mini Belt Sander 505751 at Elite Metal Tools
Jet JAT-751, 3/4" x 20-1/2" Mini Belt Sander 505751
  • 360° head rotation for use in confined spaces and difficult angles
  • Aluminum construction
  • Built-in air regulator for precise speed control
  • Ergonomically Designed Grip
  • Lightweight aluminum construction
MSRP: $777.69
$525
As low as $17.06/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed and Power Draw Bar 690251 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed and Power Draw Bar 690251
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $27,433.99
$21,681
As low as $429.06/mo
View Details
Jet TS100-460-010,1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144004K at Elite Metal Tools
Jet TS100-460-010,1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT100-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 144004K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $12,935.98
$7,376
As low as $239.72/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 690646 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 690646
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,596.53
$27,762
As low as $549.40/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691208 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691208
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $27,974.53
$22,078
As low as $436.92/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892414 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892414
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $39,867.07
$31,634
As low as $626.03/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690648 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690648
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $37,164.26
$29,648
As low as $586.73/mo
View Details
Jet JVM-836-3 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691186 at Elite Metal Tools
Jet JVM-836-3 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691186
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $22,568.80
$17,604
As low as $348.38/mo
View Details
Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410 at Elite Metal Tools
Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410
  • 10' Power cord length to match an electric hoist with 10' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
  • Compatible with VOLT Series Hoist and Trolley combinations
  • Backed by our industry leading 2-Year Warranty
$110
View Details
Jet JLH-150WO-15, 1-1/2 Ton, Lever Hoist with 15' Lift with Overload Protection 376302 at Elite Metal Tools
Jet JLH-150WO-15, 1-1/2 Ton, Lever Hoist with 15' Lift with Overload Protection 376302
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,011.99
$665
As low as $21.61/mo
View Details
Jet JCT-3641, 2" Stroke, Hex Shank, Open Handle Chipping Hammer 550641 at Elite Metal Tools
Jet JCT-3641, 2" Stroke, Hex Shank, Open Handle Chipping Hammer 550641
  • Comes with standard type retainer
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
  • Open style forged handle is engineered to dissipate the impact energy more efficiently, reducing user fatigue and increasing safety
  • Backed by the industry leading 2-Year Warranty
MSRP: $960.29
$635
As low as $20.63/mo
View Details
Jet 1-Ton Hand Chain Hoist with 15' Lift | S90-100-15 101911 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 15' Lift | S90-100-15 101911
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $437.79
$305
View Details
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed 690072 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed 690072
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,433.72
$17,504
As low as $346.40/mo
View Details
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690117 at Elite Metal Tools
Jet JTM-1050VS2 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690117
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $27,096.07
$21,432
As low as $424.13/mo
View Details
Jet GH-1880ZX With ACU-RITE 203 DRO 321487 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 203 DRO 321487
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $63,517.07
$49,999
As low as $989.48/mo
View Details
Jet JCT-3623, 4" Stroke, Hex Shank, 4-Bolt Chipping Hammer 550623 at Elite Metal Tools
Jet JCT-3623, 4" Stroke, Hex Shank, 4-Bolt Chipping Hammer 550623
  • Comes with standard type retainer
  • Easy serviceability with the 4-bolt backhead
  • Ergonomic "D" style forged handle with outside trigger
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
MSRP: $1,096.69
$716
As low as $23.27/mo
View Details
Jet 10-Ton Hand Chain Hoist with 20' Lift | S90-1000-20 101962 at Elite Metal Tools
Jet 10-Ton Hand Chain Hoist with 20' Lift | S90-1000-20 101962
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $4,286.69
$2,481
As low as $80.63/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 690547 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 690547
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $33,109.99
$26,669
As low as $527.77/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690164 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690164
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $33,920.80
$27,265
As low as $539.57/mo
View Details
Jet TS500-460-020,5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144015K at Elite Metal Tools
Jet TS500-460-020,5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144015K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $24,455.19
$13,703
As low as $445.34/mo
View Details
Jet JTM-2 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691199 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691199
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,312.20
$20,122
As low as $398.21/mo
View Details
Jet GH-2680ZH With ACU-RITE 203 DRO and Taper Attachment 321865 at Elite Metal Tools
Jet GH-2680ZH With ACU-RITE 203 DRO and Taper Attachment 321865
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $92,532.32
$71,495
As low as $1,414.88/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690160 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690160
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $31,893.72
$25,776
As low as $510.10/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed 698108 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed 698108
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,191.07
$27,465
As low as $543.53/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.