JET

  • Layout
Jet JDC-510 957CFM Industrial Dust Collector 3HP, 220V, Single Phase 414900 at Elite Metal Tools
Jet JDC-510 957CFM Industrial Dust Collector 3HP, 220V, Single Phase 414900
  • CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
  • Simple and easy to clean-out chip & dust drawer
  • Easy to change exhaust filter
  • All steel construction
  • Non-sparking aluminum housing and fan blade
MSRP: $4,256.99
$3,466
As low as $112.64/mo
View Details
Jet JDP-20EVST-460, 1-1/2" Drilling Capacity, 2HP, 460V, 3Ph with Forward and Reverse Tapping capability 354226 at Elite Metal Tools
Jet JDP-20EVST-460, 1-1/2" Drilling Capacity, 2HP, 460V, 3Ph with Forward and Reverse Tapping capability 354226
  • CSA Coolant System
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Heavy-duty steel column for increased precision and rigidity
  • High torque at all speeds both forward and reverse
MSRP: $9,324.80
$7,589
As low as $246.64/mo
View Details
Jet JWS-35X3-1 Shaper 3HP, 1Ph 708323 at Elite Metal Tools
Jet JWS-35X3-1 Shaper 3HP, 1Ph 708323
  • 4" Dust port built into fence for convenient hookup to any dust collection system
  • Extra-large chrome handwheel is conveniently located for fast, easy, and accurate spindle height adjustments
  • Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs
  • Four RPM speeds (4000, 6000, 8000, 10000) let you select the best speed and torque for different cutter diameters
  • Large 26-3/4” x 32-1/4” precision-ground cast iron table provides a durable work area and is predrilled for power feeder
MSRP: $5,121.92
$4,145
As low as $134.71/mo
View Details
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520 at Elite Metal Tools
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in a 30 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $3,000.13
$2,441
As low as $79.33/mo
View Details
Jet JJP-10BTOS, 10" Jointer / Planer Combo w/ Stand 707410 at Elite Metal Tools
Jet JJP-10BTOS, 10" Jointer / Planer Combo w/ Stand 707410
  • Combination bench top jointer and planer provides a 2-in-1 machine to maximize workspace
  • Compact bench top design fits conveniently in small shop environments
  • Heavy Duty 13 Amp motor for various cutting applications
  • Integrated cord wrap makes transporting easy and ensures workshop safety
  • Large aluminum extruded fence
MSRP: $1,189.20
$1,045
As low as $33.96/mo
View Details
Jet JVM-836-1 Step Pulley Milling Machine 115V 1Ph 690036 at Elite Metal Tools
Jet JVM-836-1 Step Pulley Milling Machine 115V 1Ph 690036
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $14,189.99
$11,154
As low as $362.50/mo
View Details
Jet Air Filtration 1000CFM | AFS-1000C 713000 at Elite Metal Tools
Jet Air Filtration 1000CFM | AFS-1000C 713000
  • Automatic air quality sensor adjusts the six speeds based on air quality.
  • Captures particles down to 1 micron.
  • Timer can be set up to 16 hours.
  • Bright, clear, LED display panel is angled for easier viewing when ceiling mounted.
  • Two-Filter system with air Diffuser disperses air into a broader pattern.
MSRP: $810.80
$735
As low as $23.88/mo
View Details
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690950 at Elite Metal Tools
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690950
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • CNC electronic variable speed vertical milling machine package for JTM-1050EVS
MSRP: $62,976.53
$49,771
As low as $984.96/mo
View Details
Jet 9 x 16 Variable Speed Bandsaw | EHB-916V 891050 at Elite Metal Tools
Jet 9 x 16 Variable Speed Bandsaw | EHB-916V 891050
  • Adjustable Material Stop
  • Automatic blade shut off switch stops the sawing process
  • Built-in, self-propelled chip brush prevents chip build up in blade guides
  • Integrated pressurized wash hose for easy machine cleaning
  • Large handwheel with blade tensioning gauge accurately measures blade pressure
MSRP: $9,730.26
$7,736
As low as $251.42/mo
View Details
JET JWBS-14SFX-BLK Black Single Phase 14” Vertical Bandsaw with 21”x17” Table JT1-1371 at Elite Metal Tools
JET JWBS-14SFX-BLK Black Single Phase 14” Vertical Bandsaw with 21”x17” Table JT1-1371
  • Blade length: 116”
  • Blade speed: 3000 FPM
  • Cutting capacity height (resaw capacity): 13”
  • Table tilt to right: 45°
MSRP: $2,230.13
$1,775
As low as $57.68/mo
View Details
Jet JPM-13CS, 13" Closed Stand Planer / Molder, 1-1/2HP, 1Ph, 115/230V 708524 at Elite Metal Tools
Jet JPM-13CS, 13" Closed Stand Planer / Molder, 1-1/2HP, 1Ph, 115/230V 708524
  • Exclusive angled 4" dust port keeps the dust hose out of the way while providing efficient chip and dust removal
  • Four precision-ground column design feature adds stability when raising and lowering the table
  • Infeed and outfeed rollers are adjustable and rubber-coated to support your workpiece without marring the wood
  • Molding cutter head accommodates over 40 standard molding cutter sets; most 2" or smaller heads can be installed without removing the planning knives to save you set-up time
  • Top-mounted height adjustment handle is easy to use for quick table height changes
MSRP: $2,432.53
$1,979
As low as $64.31/mo
View Details
Jet HVBS712V, 7" x 12" Variable Speed Horizontal / Vertical Bandsaw 415559 at Elite Metal Tools
Jet HVBS712V, 7" x 12" Variable Speed Horizontal / Vertical Bandsaw 415559
  • Adjustable toolless material stop
  • Four 8" Rubber Wheels for Ease of Movement
  • Heavy Casted Iron Bow and Bed
  • Hydraulic downfeed for ease of cut
  • Improved Wider Stand with Built-in Storage Cabinet and Chip Tray
MSRP: $3,108.26
$2,529
As low as $82.19/mo
View Details
Jet JTM-4VS Mill With X-Axis Powerfeed 690183 at Elite Metal Tools
Jet JTM-4VS Mill With X-Axis Powerfeed 690183
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,514.66
$16,094
As low as $318.50/mo
View Details
Jet "The JPS-10 1.75 HP 115V 30"" Proshop Tablesaw Cast wings" 725000K at Elite Metal Tools
Jet "The JPS-10 1.75 HP 115V 30"" Proshop Tablesaw Cast wings" 725000K
  • Convenient, magnetic paddle switch for the safest operation possible
  • CSA Certified
  • Improved dust shroud around blade for greater dust collection
  • Innovative single belt design for easier belt tensioning and reduced vibration
  • Low profile riving knife included
MSRP: $2,973.07
$2,415
As low as $78.48/mo
View Details
Jet Deluxe Xacta® SAW 3HP, 1Ph, 30" Rip 708674PK at Elite Metal Tools
Jet Deluxe Xacta® SAW 3HP, 1Ph, 30" Rip 708674PK
  • Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters
  • Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
  • Hinged motor cover on cabinet gives quick access to the motor and belts
  • Independent leaf safety guard protects operator from blade while cutting, even at 45° tilt
  • Left and right cast iron extension wings
MSRP: $4,932.72
$3,999
As low as $129.96/mo
View Details
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Cast wings 725001K at Elite Metal Tools
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Cast wings 725001K
  • Convenient, magnetic paddle switch for the safest operation possible
  • CSA Certified
  • Improved dust shroud around blade for greater dust collection
  • Innovative single belt design for easier belt tensioning and reduced vibration
  • Low profile riving knife included
MSRP: $3,108.26
$2,537
As low as $82.45/mo
View Details
Jet VBS-1207VS-DC Single Phase 12” Continuous Variable Speed Vertical Bandsaw JT1-1375 at Elite Metal Tools
Jet VBS-1207VS-DC Single Phase 12” Continuous Variable Speed Vertical Bandsaw JT1-1375
  • Table Size: 15.94” x 19.68”
  • Table Tilt (Deg.): 45°R & 15°L
  • Throat Capacity: 12”
  • Motor: 1HP 110 1PH
MSRP: $7,838.26
$6,379
As low as $207.31/mo
View Details
Jet VBS-1813VS-DC Single Phase 18” Continuous Variable Speed Vertical Bandsaw JT1-1376 at Elite Metal Tools
Jet VBS-1813VS-DC Single Phase 18” Continuous Variable Speed Vertical Bandsaw JT1-1376
  • Table Size: 19.68” x 21.25”
  • Table Tilt (Deg.): 45°R & 15°L
  • Throat Capacity: 18”
  • Motor: 1HP 110 1PH
MSRP: $10,811.45
$8,799
As low as $285.96/mo
View Details
Jet VBS-2012VS-DC Single Phase 20” Continuous Variable Speed Vertical Bandsaw JT1-1377 at Elite Metal Tools
Jet VBS-2012VS-DC Single Phase 20” Continuous Variable Speed Vertical Bandsaw JT1-1377
  • Table Size: 21.65” x 23.62”
  • Table Tilt (Deg.): 45°R & 15°L
  • Throat Capacity: 20”
  • Motor: 2HP 230 1PH
MSRP: $14,865.72
$12,099
As low as $393.21/mo
View Details
Jet 5-Ton Hand Chain Hoist with 30' Lift | S90-500-30 101953 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 30' Lift | S90-500-30 101953
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $2,113.09
$1,278
As low as $41.53/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690430 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690430
  • Adjustable gibs throughout
  • Heavy-duty spindle brake
  • Heavy-duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
MSRP: $31,488.26
$25,478
As low as $504.20/mo
View Details
Jet JMD-18 Mill/Drill With X-Axis Table Powerfeed 350119 at Elite Metal Tools
Jet JMD-18 Mill/Drill With X-Axis Table Powerfeed 350119
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $7,122.05
$5,628
As low as $182.91/mo
View Details
Jet Geared Head Drill Press with Power Downfeed, 2HP, 3Ph, 230V | JDP20EVST-230-PDF 354245 at Elite Metal Tools
Jet Geared Head Drill Press with Power Downfeed, 2HP, 3Ph, 230V | JDP20EVST-230-PDF 354245
  • CSA Coolant System
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Heavy-duty steel column for increased precision and rigidity
  • High torque at all speeds both forward and reverse
MSRP: $11,122.20
$8,759
As low as $284.66/mo
View Details
Jet J-2500, 15" Floor Model Drill Press 115V 1Ph 354400 at Elite Metal Tools
Jet J-2500, 15" Floor Model Drill Press 115V 1Ph 354400
  • 3-1/8" stroke for deep hole applications
  • Cast iron head
  • Constructed to provide a solid base for drilling
  • Large ground steel column for maximum head and table support
  • Large quill allows greater accuracy
MSRP: $1,718.77
$1,455
As low as $47.28/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.