JET

  • Layout
Jet 1-Ton Hand Chain Hoist with 10' Lift | S90-100-10 101910 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 10' Lift | S90-100-10 101910
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $387.19
$269.50
View Details
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Quill) With X & Y-Axis Powerfeeds 692192 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Quill) With X & Y-Axis Powerfeeds 692192
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $22,744.47
$17,457
As low as $345.47/mo
View Details
Jet BDB-929 STAND 321377 at Elite Metal Tools
Jet BDB-929 STAND 321377
  • Hinged doors to store supplies
  • Sturdy steel metal stand built to fit the JET BDB-929 lathe
MSRP: $837.86
$756
As low as $24.57/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 3-Phase 20' Lift | 1/2SS-3C-20 123200 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 3-Phase 20' Lift | 1/2SS-3C-20 123200
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,507.69
$3,229
As low as $104.94/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,597.89
$3,276
As low as $106.47/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS025-010 104011 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS025-010 104011
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
MSRP: $7,048.79
$4,030
As low as $130.97/mo
View Details
Jet JCT-1603, Floor Sand Rammer / Backfill Tamper 550603 at Elite Metal Tools
Jet JCT-1603, Floor Sand Rammer / Backfill Tamper 550603
  • All Steel cylinder housing for increased durability
  • Heavy-Duty, industry proven valve design
  • Highly efficient way to quickly compact backfill and sand
  • Maximum power with slow, powerful blows for compacting large sand molds
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,267.19
$820
As low as $26.65/mo
View Details
Jet Coolant System with Switch and Tray for ELITE Mills 894094 at Elite Metal Tools
Jet Coolant System with Switch and Tray for ELITE Mills 894094
  • Accessory for JET ELITE Mills
MSRP: $1,891.99
$1,582
As low as $51.41/mo
View Details
Jet JET — 52 Piece CK38 Clamping Kit for 1/2 in T-Slots 660038 at Elite Metal Tools
Jet JET — 52 Piece CK38 Clamping Kit for 1/2 in T-Slots 660038
  • 58-pc Clamping Kit with Tray for 1/2" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
MSRP: $263.55
$239
View Details
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619 at Elite Metal Tools
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619
  • Air and coolant line connections are encased in braided metal wire.
  • One gallon tank is made of enamel paint finished metal with removable corrosion resistant inner liner.
  • Flood coolant system for 230/460V 3 Ph machines
MSRP: $810.80
$724
As low as $23.53/mo
View Details
Jet JAT-128, 1" Composite Impact Wrench 505128 at Elite Metal Tools
Jet JAT-128, 1" Composite Impact Wrench 505128
  • Amazing 1,400 ft.lbs. or torque while only weighing 7.45 lbs.
  • Great balance reduces wrist and hand fatigue for comfortable operation
  • One-Handed Operation, gives convenience and control in tight places
  • Only 7.9" from end of anvil to back of housing to get into tight areas easily and efficiently
  • Torque regulator switch for quick easy one hand operation
MSRP: $929.49
$621
As low as $20.18/mo
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 691232 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 691232
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,136.53
$19,675
As low as $389.36/mo
View Details
Jet 1-1/2-PT, 1-1/2-Ton Heavy Duty Manual Trolley 252015 at Elite Metal Tools
Jet 1-1/2-PT, 1-1/2-Ton Heavy Duty Manual Trolley 252015
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $508.19
$312
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-460-015 144008 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-460-015 144008
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $14,510.09
$8,070
As low as $262.27/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Powerfeed 351147 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Powerfeed 351147
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $13,379.07
$10,394
As low as $337.80/mo
View Details
Jet GH-1880ZX With Taper Attachment and Collet Closer 322486 at Elite Metal Tools
Jet GH-1880ZX With Taper Attachment and Collet Closer 322486
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $73,787.99
$56,795
As low as $1,123.97/mo
View Details
Jet 3" Stroke, Round Shank, 4-Bolt Chipping Hammer | JCT-3620A 550620 at Elite Metal Tools
Jet 3" Stroke, Round Shank, 4-Bolt Chipping Hammer | JCT-3620A 550620
  • Comes with standard type retainer
  • Easy serviceability with the 4-bolt backhead
  • Ergonomic "D" style forged handle with outside trigger
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
MSRP: $1,114.29
$745
As low as $24.21/mo
View Details
Jet JAT-450, 4" Angle Grinder 505450 at Elite Metal Tools
Jet JAT-450, 4" Angle Grinder 505450
  • Ergonomically Designed Grip
  • Grinding wheel not included
  • Lightweight composite handle
  • Precision spiral bevel gears transfer torque and speed to spindle for added durability
  • Rugged, ball-bearing design for durability
MSRP: $574.19
$425
View Details
Jet 15-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-1500WO-15 109115 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-1500WO-15 109115
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $6,880.49
$3,999
As low as $129.96/mo
View Details
Jet E-1236VS With ACU-RITE 303 CSS DRO 892315 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 CSS DRO 892315
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $28,650.26
$22,224
As low as $439.81/mo
View Details
Jet E-1236VS With ACU-RITE 303 CSS DRO With Collet Closer 892317 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 CSS DRO With Collet Closer 892317
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $26,082.53
$20,366
As low as $403.04/mo
View Details
Jet Aloris AXA Intro-Pro Set for Elite E-1236VS Lathe 892092 at Elite Metal Tools
Jet Aloris AXA Intro-Pro Set for Elite E-1236VS Lathe 892092
  • #1 Turning and facing holder
  • Specifically designed for Elite E-1236VS Lathes
  • Super Precision Tool Post
MSRP: $1,013.53
$885
As low as $28.76/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed and Power Draw Bar 690251 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed and Power Draw Bar 690251
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $27,433.99
$21,340
As low as $422.31/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691191 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 691191
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $23,785.07
$18,695
As low as $369.97/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.