JET

  • Layout
Jet E-1236VS With ACU-RITE 203 DRO 892303 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 203 DRO 892303
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $27,298.80
$21,581
As low as $427.08/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment 892454 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment 892454
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,569.72
$29,946
As low as $592.63/mo
View Details
Jet JET — Air Powered Drawbar Kit for EVS949 and ETM 949 Elite Milling Machines 351187K at Elite Metal Tools
Jet JET — Air Powered Drawbar Kit for EVS949 and ETM 949 Elite Milling Machines 351187K
MSRP: $1,756.80
$1,482
As low as $48.16/mo
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X, Y and Z-Axis Powerfeeds 690524 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X, Y and Z-Axis Powerfeeds 690524
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,326.26
$27,563
As low as $545.47/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892418 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO With Taper Attachment and Collet Closer 892418
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $40,813.07
$32,329
As low as $639.79/mo
View Details
Jet JET — Taper Attachment for GH-268ZH and 26120ZN Lathes 321293 at Elite Metal Tools
Jet JET — Taper Attachment for GH-268ZH and 26120ZN Lathes 321293
  • 10° Inclusive cutting capacity
  • Mounts to predrilled and tapped holes
  • Specially designed for each model
MSRP: $7,054.40
$5,578
As low as $181.28/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds 698128 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 DRO X & Y Powerfeeds 698128
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,083.07
$28,795
As low as $569.85/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690628 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690628
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $36,488.53
$29,152
As low as $576.91/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite MilPwr G2 CNC Controller 690676 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite MilPwr G2 CNC Controller 690676
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • CNC electronic variable speed vertical milling machine package for JTM-1050EVS
MSRP: $73,517.72
$57,516
As low as $1,138.24/mo
View Details
Jet JVM-836-3 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690146 at Elite Metal Tools
Jet JVM-836-3 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690146
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,811.99
$16,313
As low as $322.83/mo
View Details
Jet JET Replacement 5 Micron Filter Bag for Dust Collectors 708706 at Elite Metal Tools
Jet JET Replacement 5 Micron Filter Bag for Dust Collectors 708706
  • Compatible with Jet DC-1100, DC-1100VX, DC-1200, DC-1200VX Dust Collectors
  • Shop the Jet Parts Store for all your replacement part needs
MSRP: $229.67
$225
View Details
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y Powerfeeds 691178 at Elite Metal Tools
Jet JVM-836-1 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y Powerfeeds 691178
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $22,974.26
$17,899
As low as $354.22/mo
View Details
Jet JLH-300-5PSH 3 Ton Lever Hoist, 5' Lift with Overload Protection & Shipyard Hooks 376900 at Elite Metal Tools
Jet JLH-300-5PSH 3 Ton Lever Hoist, 5' Lift with Overload Protection & Shipyard Hooks 376900
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,467.39
$933.90
As low as $30.35/mo
View Details
Jet GH-2680ZH With Newall DP700 DRO 321861 at Elite Metal Tools
Jet GH-2680ZH With Newall DP700 DRO 321861
  • 12" 3 Jaw scroll chuck with top reversing jaws
  • 2 Steady rests with roller bearings
  • Bed ways are induction hardened and ground for durability
  • E-Stop on Carriage for added safety
  • Electronic Chuck Key Holder
MSRP: $83,964.20
$64,999
As low as $1,286.33/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS050-010 104022 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS050-010 104022
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $8,070.69
$4,630
As low as $150.47/mo
View Details
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690093 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690093
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $29,055.72
$22,872
As low as $452.63/mo
View Details
Jet JTM-1254VS with X Powerfeed 698025 at Elite Metal Tools
Jet JTM-1254VS with X Powerfeed 698025
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $29,866.53
$23,468
As low as $464.43/mo
View Details
Jet GH-1880ZX With Newall DP700 DRO With Taper Attachment 321571 at Elite Metal Tools
Jet GH-1880ZX With Newall DP700 DRO With Taper Attachment 321571
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $73,923.07
$57,795
As low as $1,143.76/mo
View Details
Jet Gauging Table Kit for JIW-45T Ironworker | 756106 756106 at Elite Metal Tools
Jet Gauging Table Kit for JIW-45T Ironworker | 756106 756106
  • Compatible with the JET JIW-45T Ironworker
  • Improve your precision and speed at your Punch workstation with adjustable fences and handles to align your material.
  • Shop the JET store for more Ironworker accessories and replacement parts
$462
View Details
Jet 3-Ton Hand Chain Hoist with 15' Lift | S90-300-15 101941 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 15' Lift | S90-300-15 101941
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $908.59
$599
As low as $19.46/mo
View Details
Jet JLP-025A-5, 1/4 Ton Mini-Puller, 5' Lift 287100 at Elite Metal Tools
Jet JLP-025A-5, 1/4 Ton Mini-Puller, 5' Lift 287100
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $278.29
$191
View Details
Jet E-1440VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892472 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892472
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $39,596.80
$31,436
As low as $622.11/mo
View Details
Jet 5-Ton Hand Chain Hoist with 10' Lift | S90-500-10 101950 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 10' Lift | S90-500-10 101950
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,311.19
$852.50
As low as $27.70/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-460-020 144006 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-460-020 144006
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $10,366.39
$5,835
As low as $189.63/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.