JET

  • Layout
Jet JLP-150A-5SH, 1-1/2 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287700 at Elite Metal Tools
Jet JLP-150A-5SH, 1-1/2 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287700
  • All steel construction
  • Impact resistant all steel construction for added durability and protection
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
$548.00
$399.00
View Details
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690424 at Elite Metal Tools
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690424
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
$26,553.52
$21,399.00
As low as $423/mo
View Details
Jet JET — 20-Piece TiN-Coated Double End Mill Set 650210 at Elite Metal Tools
Jet JET — 20-Piece TiN-Coated Double End Mill Set 650210
  • Double end TiN coated mill set
  • Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced build-up edge formations, and catering
  • Square end mill type to be used for general milling applications
  • TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds
  • 3/16" to 3/4" by 16ths
$301.60
$275.00
View Details
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619 at Elite Metal Tools
Jet JET — Flood Coolant System for 230/460V 3-Phase Milling Machines A619
  • Air and coolant line connections are encased in braided metal wire.
  • One gallon tank is made of enamel paint finished metal with removable corrosion resistant inner liner.
  • Flood coolant system for 230/460V 3 Ph machines
$626.43
$570.00
As low as $18/mo
View Details
Jet JLP-075A-5, 3/4 Ton Lever Hoist, 5' Lift 287300 at Elite Metal Tools
Jet JLP-075A-5, 3/4 Ton Lever Hoist, 5' Lift 287300
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
$434.00
$284.58
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690529 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690529
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
$30,187.14
$24,329.00
As low as $481/mo
View Details
Jet JVM-836-1 Mill With Newall DP700 DRO With X and Y-Axis Powerfeed 691175 at Elite Metal Tools
Jet JVM-836-1 Mill With Newall DP700 DRO With X and Y-Axis Powerfeed 691175
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
$17,340.00
$14,259.00
As low as $463/mo
View Details
Jet ETM-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894104 at Elite Metal Tools
Jet ETM-949 Mill with X-Axis JET Powerfeed and USA Made Air Draw Bar 894104
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$29,422.86
$23,949.00
As low as $473/mo
View Details
Jet JET —8 in Riser Block for JTM1050 350096 at Elite Metal Tools
Jet JET —8 in Riser Block for JTM1050 350096
  • Adds 8" height capacity
  • Includes all mounting hardware
  • Specially designed for each model
$955.52
$875.00
As low as $28/mo
View Details
Jet GH-1640ZX With ACU-RITE 303 DRO 321381 at Elite Metal Tools
Jet GH-1640ZX With ACU-RITE 303 DRO 321381
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
$39,994.29
$32,769.00
As low as $648/mo
View Details
Jet JTM-4VS-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691087 at Elite Metal Tools
Jet JTM-4VS-1 Mill With Newall DP700 DRO With X-Axis Powerfeed 691087
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
$21,417.08
$17,229.00
As low as $340/mo
View Details
Jet JG-75A, 3/4 Ton Grip Puller with Cable 286575K at Elite Metal Tools
Jet JG-75A, 3/4 Ton Grip Puller with Cable 286575K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
$758.00
$508.00
As low as $16/mo
View Details
Jet GH-1440-1 Lathe with Newall NMS300 DRO and Collet Closer 323387 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall NMS300 DRO and Collet Closer 323387
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$29,137.14
$23,799.00
As low as $470/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS500-460-010 144013 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS500-460-010 144013
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
$15,794.00
$9,905.00
As low as $321/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690139 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690139
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
$25,178.57
$20,369.00
As low as $403/mo
View Details
Jet JLP-300A-10, 3 Ton Lever Hoist with 10' Lift 287501 at Elite Metal Tools
Jet JLP-300A-10, 3 Ton Lever Hoist with 10' Lift 287501
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
$774.00
$516.00
As low as $16/mo
View Details
Jet JCT-1603, Floor Sand Rammer / Backfill Tamper 550603 at Elite Metal Tools
Jet JCT-1603, Floor Sand Rammer / Backfill Tamper 550603
  • All Steel cylinder housing for increased durability
  • Heavy-Duty, industry proven valve design
  • Highly efficient way to quickly compact backfill and sand
  • Maximum power with slow, powerful blows for compacting large sand molds
  • Backed by the industry leading 2-Year Warranty
$1,060.00
$725.99
As low as $23/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-550-10 110110
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$2,950.00
$1,885.00
As low as $61/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Collet Closer 892455 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Collet Closer 892455
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
$33,135.89
$26,729.00
As low as $528/mo
View Details
Jet Gauging Table Kit for JIW-45T Ironworker | 756106 756106 at Elite Metal Tools
Jet Gauging Table Kit for JIW-45T Ironworker | 756106 756106
  • Compatible with the JET JIW-45T Ironworker
  • Improve your precision and speed at your Punch workstation with adjustable fences and handles to align your material.
  • Shop the JET store for more Ironworker accessories and replacement parts
$559.30
$404.00
View Details
Jet 1/2-Ton Electric Chain Hoist 3-Phase 10' Lift | 1/2SS-3C-10 123100 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 3-Phase 10' Lift | 1/2SS-3C-10 123100
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
$4,062.00
$2,594.99
As low as $84/mo
View Details
Jet E-1440VS With Taper Attachment and Collet Closer 892452 at Elite Metal Tools
Jet E-1440VS With Taper Attachment and Collet Closer 892452
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
$30,411.43
$24,649.00
As low as $487/mo
View Details
Jet JAT-751, 3/4" x 20-1/2" Mini Belt Sander 505751 at Elite Metal Tools
Jet JAT-751, 3/4" x 20-1/2" Mini Belt Sander 505751
  • 360° head rotation for use in confined spaces and difficult angles
  • Aluminum construction
  • Built-in air regulator for precise speed control
  • Ergonomically Designed Grip
  • Lightweight aluminum construction
$650.00
$445.99
View Details
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690095 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 690095
  • Certified Meehanite® castings
  • Large Diameter quill is chromed
  • Precision bored and honed milling head
$19,785.71
$15,999.00
As low as $316/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.