JET

  • Layout
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed 698108 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 DRO, X Powerfeed 698108
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $31,082.79
$24,655
As low as $487.92/mo
View Details
Jet E-1440VS With Taper Attachment 892450 at Elite Metal Tools
Jet E-1440VS With Taper Attachment 892450
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $30,222.79
$23,235
As low as $459.82/mo
View Details
Jet JTM-2 Mill With ACU-RITE 203 DRO and X-Axis Powerfeed 690114 at Elite Metal Tools
Jet JTM-2 Mill With ACU-RITE 203 DRO and X-Axis Powerfeed 690114
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,762.79
$15,950
As low as $315.65/mo
View Details
Jet 3" Stroke, Round Shank, 4-Bolt Chipping Hammer | JCT-3620A 550620 at Elite Metal Tools
Jet 3" Stroke, Round Shank, 4-Bolt Chipping Hammer | JCT-3620A 550620
  • Comes with standard type retainer
  • Easy serviceability with the 4-bolt backhead
  • Ergonomic "D" style forged handle with outside trigger
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
MSRP: $1,012.99
$655
As low as $21.28/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-275-10 110100 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 10' Lift | JSH-275-10 110100
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $3,159.99
$1,815
As low as $58.98/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894320 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894320
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,859.99
$33,845
As low as $669.79/mo
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds 690098 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds 690098
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $23,834.29
$18,650
As low as $369.08/mo
View Details
Jet JCT-3644, 4" Stroke, Round Shank, Open Handle Chipping Hammer 550644 at Elite Metal Tools
Jet JCT-3644, 4" Stroke, Round Shank, Open Handle Chipping Hammer 550644
  • Comes with standard type retainer
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
  • Open style forged handle is engineered to dissipate the impact energy more efficiently, reducing user fatigue and increasing safety
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,042.99
$675
As low as $21.93/mo
View Details
Jet ETM-949 Mill with Y-Axis JET Powerfeed 894101 at Elite Metal Tools
Jet ETM-949 Mill with Y-Axis JET Powerfeed 894101
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $27,888.59
$21,555
As low as $426.57/mo
View Details
Jet BDB-929 STAND 321377 at Elite Metal Tools
Jet BDB-929 STAND 321377
  • Hinged doors to store supplies
  • Sturdy steel metal stand built to fit the JET BDB-929 lathe
MSRP: $761.69
$685
As low as $22.26/mo
View Details
Jet Coolant System with Switch and Tray for ELITE Mills 894094 at Elite Metal Tools
Jet Coolant System with Switch and Tray for ELITE Mills 894094
  • Accessory for JET ELITE Mills
MSRP: $1,719.99
$1,425
As low as $46.31/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203(Quill) DRO and X, Y-Axis JET Powerfeeds 894319 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203(Quill) DRO and X, Y-Axis JET Powerfeeds 894319
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,805.69
$30,929
As low as $612.08/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894143 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894143
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,385.69
$32,785
As low as $648.81/mo
View Details
Jet JCT-3623, 4" Stroke, Hex Shank, 4-Bolt Chipping Hammer 550623 at Elite Metal Tools
Jet JCT-3623, 4" Stroke, Hex Shank, 4-Bolt Chipping Hammer 550623
  • Comes with standard type retainer
  • Easy serviceability with the 4-bolt backhead
  • Ergonomic "D" style forged handle with outside trigger
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
MSRP: $996.99
$645
As low as $20.96/mo
View Details
Jet JLH-150WO-15, 1-1/2 Ton, Lever Hoist with 15' Lift with Overload Protection 376302 at Elite Metal Tools
Jet JLH-150WO-15, 1-1/2 Ton, Lever Hoist with 15' Lift with Overload Protection 376302
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $919.99
$605
As low as $19.66/mo
View Details
Jet JTM-2 Mill With 3-Axis Newall DP700 DRO (Knee) 691182 at Elite Metal Tools
Jet JTM-2 Mill With 3-Axis Newall DP700 DRO (Knee) 691182
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,394.29
$15,675
As low as $310.20/mo
View Details
Jet Servo 150 Series X-Axis Table Powerfeed 350183 at Elite Metal Tools
Jet Servo 150 Series X-Axis Table Powerfeed 350183
  • Accessory for JET ELITE Mills
MSRP: $2,457.09
$1,999
As low as $64.96/mo
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and Power Draw Bar 690125 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and Power Draw Bar 690125
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,448.59
$19,095
As low as $377.89/mo
View Details
Jet GH-1440-1 Lathe with Taper Attachment and Collet Closer 323373 at Elite Metal Tools
Jet GH-1440-1 Lathe with Taper Attachment and Collet Closer 323373
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $36,242.79
$28,365
As low as $561.34/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds 894312 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds 894312
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,822.79
$30,225
As low as $598.15/mo
View Details
Jet Coolant Tray For ELITE Mills 894093 at Elite Metal Tools
Jet Coolant Tray For ELITE Mills 894093
  • Accessory for JET ELITE Mills
MSRP: $1,044.29
$925
As low as $30.06/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894355 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894355
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,341.39
$32,050
As low as $634.26/mo
View Details
Jet JLH-150-5PSH 1-1/2 Ton Lever Hoist, 5' Lift with Overload Protection & Shipyard Hooks 376800 at Elite Metal Tools
Jet JLH-150-5PSH 1-1/2 Ton Lever Hoist, 5' Lift with Overload Protection & Shipyard Hooks 376800
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $850.99
$565
As low as $18.36/mo
View Details
Jet JCT-3641, 2" Stroke, Hex Shank, Open Handle Chipping Hammer 550641 at Elite Metal Tools
Jet JCT-3641, 2" Stroke, Hex Shank, Open Handle Chipping Hammer 550641
  • Comes with standard type retainer
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
  • Open style forged handle is engineered to dissipate the impact energy more efficiently, reducing user fatigue and increasing safety
  • Backed by the industry leading 2-Year Warranty
MSRP: $872.99
$575
As low as $18.68/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.