JET

  • Layout
Jet JET Replacement 5 Micron Filter Bag for Dust Collectors 708706 at Elite Metal Tools
Jet JET Replacement 5 Micron Filter Bag for Dust Collectors 708706
  • Compatible with Jet DC-1100, DC-1100VX, DC-1200, DC-1200VX Dust Collectors
  • Shop the Jet Parts Store for all your replacement part needs
$205
View Details
Jet 15-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1500WO-30 109130 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1500WO-30 109130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $9,457.99
$5,249
As low as $170.59/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 (Knee) and Power Draw Bar 690400 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 (Knee) and Power Draw Bar 690400
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $23,342.79
$18,295
As low as $362.05/mo
View Details
Jet JET — Flood Coolant System for 2223VS Drill Press 1/8hp 3 phase 220/440V 5508071 at Elite Metal Tools
Jet JET — Flood Coolant System for 2223VS Drill Press 1/8hp 3 phase 220/440V 5508071
  • Flood Style
  • 1/8 HP
  • 220/440V, 3 Ph
MSRP: $651.09
$615
As low as $19.98/mo
View Details
Jet E-1236VS With ACU-RITE 303 DRO 892311 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 DRO 892311
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $22,728.59
$17,350
As low as $343.35/mo
View Details
Jet E-1236VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892314 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892314
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $29,485.69
$22,699
As low as $449.21/mo
View Details
Jet JG-75, 3/4 Ton Grip Puller Without Cable 286575 at Elite Metal Tools
Jet JG-75, 3/4 Ton Grip Puller Without Cable 286575
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $599.99
$435
View Details
Jet JET — Air Powered Drawbar Kit for EVS949 and ETM 949 Elite Milling Machines 351187K at Elite Metal Tools
Jet JET — Air Powered Drawbar Kit for EVS949 and ETM 949 Elite Milling Machines 351187K
MSRP: $1,597.09
$1,339
As low as $43.51/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894311 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894311
  • Patented vari-disc key provides up to 10 times the wear resistance than aluminum or brass keys
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
MSRP: $40,542.79
$31,460
As low as $622.59/mo
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS200-230-010 140239 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS200-230-010 140239
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $12,928.99
$7,220
As low as $234.65/mo
View Details
Jet MT200-4, 2 Ton Two Speed Electric Trolley 3-Phase 460V 144187 at Elite Metal Tools
Jet MT200-4, 2 Ton Two Speed Electric Trolley 3-Phase 460V 144187
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,175.99
$2,375
As low as $77.18/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690139 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar 690139
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,537.09
$20,595
As low as $407.57/mo
View Details
Jet JET — Collet Closer CC-ZX for all ZX Series Lathes 321292 at Elite Metal Tools
Jet JET — Collet Closer CC-ZX for all ZX Series Lathes 321292
  • Precision ground components
  • Rear mounted lever action
  • Specially designed for each model
  • Uses 5C collets
  • 30 x 7 x 7 in
MSRP: $6,511.39
$5,085
As low as $165.26/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment 892454 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment 892454
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $34,154.29
$26,865
As low as $531.65/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894346 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894346
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,385.69
$32,795
As low as $649.01/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO 351142 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO 351142
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $11,794.29
$9,199
As low as $298.96/mo
View Details
Jet BDB-1340A With ACU-RITE VUE DRO With Collet Closer 321108 at Elite Metal Tools
Jet BDB-1340A With ACU-RITE VUE DRO With Collet Closer 321108
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Change gears to allow metric threading
MSRP: $19,042.79
$14,550
As low as $472.87/mo
View Details
Jet GH-1860ZX With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 321505 at Elite Metal Tools
Jet GH-1860ZX With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 321505
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $66,035.69
$50,995
As low as $1,009.19/mo
View Details
Jet JTM-4VS-1 Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds and Power Draw Bar 690422 at Elite Metal Tools
Jet JTM-4VS-1 Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds and Power Draw Bar 690422
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,799.99
$20,050
As low as $396.78/mo
View Details
Jet GH-1440-1 Lathe with Newall NMS300 DRO, Collet Closer, and Taper Attachment 323389 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall NMS300 DRO, Collet Closer, and Taper Attachment 323389
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $40,542.79
$31,455
As low as $622.49/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO 892453 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO 892453
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $31,205.69
$24,745
As low as $489.70/mo
View Details
Jet SLT-330F, Scissor Lift Table With Folding Handle 140771 at Elite Metal Tools
Jet SLT-330F, Scissor Lift Table With Folding Handle 140771
  • All steel design of frame and table permit the transport of heavy materials
  • Easy-To-Use Hydraulic Foot Pump
  • Easy-to-use hydraulic foot pump for precision raising and lowering of table
  • Fixed rear wheels feature parking brakes for added safety
  • Fold-down handle for easy storage
MSRP: $996.99
$655
As low as $21.28/mo
View Details
Jet GH-1860ZX With ACU-RITE 303 DRO 321590 at Elite Metal Tools
Jet GH-1860ZX With ACU-RITE 303 DRO 321590
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $52,582.79
$41,295
As low as $817.22/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Powerfeed 351147 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO & X-Powerfeed 351147
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $12,162.79
$9,465
As low as $307.61/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.