Category
Country of Origin

JET

Jet 5-Ton Hand Chain Hoist with 10' Lift | S90-500-10 101950 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 10' Lift | S90-500-10 101950
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,311.19
$852.50
As low as $27.70/mo
View Details
Jet JTM-1254VS with X, Y & Z Powerfeeds & Air Power Drawbar 698030 at Elite Metal Tools
Jet JTM-1254VS with X, Y & Z Powerfeeds & Air Power Drawbar 698030
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $34,191.07
$27,037
As low as $535.06/mo
View Details
Jet JVM-836-3 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691186 at Elite Metal Tools
Jet JVM-836-3 Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds 691186
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $22,568.80
$17,325
As low as $342.86/mo
View Details
Jet 1-PT, 1-Ton Heavy Duty Manual Trolley 252010 at Elite Metal Tools
Jet 1-PT, 1-Ton Heavy Duty Manual Trolley 252010
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $317.89
$225
View Details
Jet E-1440VS With ACU-RITE 303 DRO With Collet Closer 892463 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO With Collet Closer 892463
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,029.07
$29,090
As low as $575.69/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690630 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar 690630
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $33,785.72
$26,744
As low as $529.26/mo
View Details
Jet Drive Cleat Rolls - Set of 10 for LF-20 756092 at Elite Metal Tools
Jet Drive Cleat Rolls - Set of 10 for LF-20 756092
  • Case hardened steel for durability and accuracy
  • Creates accurate 1-1/8" drive cleats fast and with ease
  • Optional case-hardened drive cleat roller for Jet's 20 ga lock former
MSRP: $581.12
$548
As low as $17.81/mo
View Details
Jet Taper Attachment For ELITE E-1236VS Lathe 892005 at Elite Metal Tools
Jet Taper Attachment For ELITE E-1236VS Lathe 892005
  • 10° Inclusive cutting capacity
  • Factory installation available
  • Mounts to predrilled and tapped holes
  • Specifically designed for Elite E-1236VS Lathes
MSRP: $2,905.53
$2,366
As low as $76.89/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Quill) 691190 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Quill) 691190
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $22,433.72
$17,225
As low as $340.88/mo
View Details
On Sale
Jet GH-1880ZX With ACU-RITE 303 DRO With Collet Closer 321598 at Elite Metal Tools
Jet GH-1880ZX With ACU-RITE 303 DRO With Collet Closer 321598
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $71,963.53
$55,195
As low as $1,092.30/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894313 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894313
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,218.80
$36,876
As low as $729.77/mo
View Details
Jet 5SS-3C-15, 5-Ton Electric Chain Hoist 3-Phase 15' lift 531500 at Elite Metal Tools
Jet 5SS-3C-15, 5-Ton Electric Chain Hoist 3-Phase 15' lift 531500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $12,451.99
$7,095
As low as $230.58/mo
View Details
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 691411 at Elite Metal Tools
Jet JTM-4VS-1 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X-Axis Powerfeed 691411
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,325.72
$19,096
As low as $377.90/mo
View Details
Jet JTM-2 Mill With X-Axis Powerfeed 690006 at Elite Metal Tools
Jet JTM-2 Mill With X-Axis Powerfeed 690006
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $18,244.26
$14,045
As low as $456.46/mo
View Details
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 460V 144183 at Elite Metal Tools
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 460V 144183
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $3,855.49
$2,254
As low as $73.25/mo
View Details
Jet Mill With 3-Axis Newall DP500 DRO (Quill) With X-Axis Powerfeeds | JTM-1 692191 at Elite Metal Tools
Jet Mill With 3-Axis Newall DP500 DRO (Quill) With X-Axis Powerfeeds | JTM-1 692191
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $21,730.93
$16,724
As low as $330.96/mo
View Details
Jet 3SS-3C-15, 3-Ton Electric Chain Hoist 3-Phase 15' Lift 331500 at Elite Metal Tools
Jet 3SS-3C-15, 3-Ton Electric Chain Hoist 3-Phase 15' Lift 331500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $9,743.79
$5,495
As low as $178.58/mo
View Details
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds 690522 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds 690522
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,501.80
$25,795
As low as $510.48/mo
View Details
Jet JTM-2 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691195 at Elite Metal Tools
Jet JTM-2 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691195
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,055.45
$18,895
As low as $373.93/mo
View Details
Jet JET — Replacement Filter for JDCS-505 Dust Collector 414840 at Elite Metal Tools
Jet JET — Replacement Filter for JDCS-505 Dust Collector 414840
  • Specifically designed for Metalworking dust collection
  • Filter Efficiency: 90% @ 50 Microns
  • Filter Size: 6-3/4 X 2-5/8 X 13-1/2 In.
MSRP: $581.12
$566
As low as $18.39/mo
View Details
Jet JET — 400 Series Quick Change Tool Post 650305 at Elite Metal Tools
Jet JET — 400 Series Quick Change Tool Post 650305
  • Maximum rigidity for chatter-free performance
  • Holders fit ALLORRIS and YUASA tool posts
  • Completely sealed for maintenance free operation
  • Change tools in seconds
  • Fits 14" - 20" swing lathes
MSRP: $1,324.39
$1,142
As low as $37.11/mo
View Details
Jet ETM-949 Mill with Y-Axis JET Powerfeed 894101 at Elite Metal Tools
Jet ETM-949 Mill with Y-Axis JET Powerfeed 894101
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $30,677.45
$23,690
As low as $468.82/mo
View Details
On Sale
Jet GH-1880ZX With Newall DP700 DRO 321488 at Elite Metal Tools
Jet GH-1880ZX With Newall DP700 DRO 321488
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $63,787.45
$49,295
As low as $975.54/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894318 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894318
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,543.07
$35,248
As low as $697.55/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.