JET

  • Layout
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-150-30 133124 at Elite Metal Tools
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-150-30 133124
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,279.99
$829
As low as $26.94/mo
View Details
Jet 30" Rip ProShop Rail Set, JPSR-30: 708483 at Elite Metal Tools
Jet 30" Rip ProShop Rail Set, JPSR-30: 708483
$425
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS025-020 104013 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS025-020 104013
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $6,384.99
$3,615
As low as $117.48/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill), X, Y and Z-Axis Powerfeeds With Power Drawbar 690153 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill), X, Y and Z-Axis Powerfeeds With Power Drawbar 690153
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $28,355.39
$21,895
As low as $433.30/mo
View Details
Jet JAT-501, HVLP Mini Spray Gun 505501 at Elite Metal Tools
Jet JAT-501, HVLP Mini Spray Gun 505501
  • Gravity feed 125 cc cup included
  • High performance is coupled with an anodized aluminum body for easier cleaning
  • HVLP technology improves material transfer for a more consistent coverage with minimal overspray
  • Includes 1.0 mm fluid nozzle with additional nozzle kits available
  • Smaller, compact design reduces weight and operator fatigue
MSRP: $290.99
$205
View Details
Jet 3-Ton Hand Chain Hoist with 15' Lift | S90-300-15 101941 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 15' Lift | S90-300-15 101941
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $825.99
$555
As low as $18.03/mo
View Details
Jet Taper Attachment for ELITE E-1340 and E-1440 Lathes 892035 at Elite Metal Tools
Jet Taper Attachment for ELITE E-1340 and E-1440 Lathes 892035
  • 10° Inclusive cutting capacity
  • Factory installation available
  • Mounts to predrilled and tapped holes
  • Specifically designed for Elite E-1340VS and E-1440VS Lathes
MSRP: $2,764.29
$2,215
As low as $71.98/mo
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-230-020 140240 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-230-020 140240
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $12,647.99
$7,075
As low as $229.93/mo
View Details
Jet GH-1860ZX With Taper Attachment 321463 at Elite Metal Tools
Jet GH-1860ZX With Taper Attachment 321463
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $54,057.09
$42,495
As low as $840.97/mo
View Details
Jet JET — Replacement Filter for JDCS-505 Dust Collector 414840 at Elite Metal Tools
Jet JET — Replacement Filter for JDCS-505 Dust Collector 414840
  • Specifically designed for Metalworking dust collection
  • Filter Efficiency: 90% @ 50 Microns
  • Filter Size: 6-3/4 X 2-5/8 X 13-1/2 In.
MSRP: $528.29
$515
As low as $16.73/mo
View Details
Jet JET — Replacement Filter Bag and Collection Bag Kit, 30 Micron, for DC-650 Dust Collector 708642B at Elite Metal Tools
Jet JET — Replacement Filter Bag and Collection Bag Kit, 30 Micron, for DC-650 Dust Collector 708642B
  • Includes 30 Micron filter bag and 5 clear plastic collection bags
$210
View Details
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Knee) 692182 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP500 DRO (Knee) 692182
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $18,244.29
$13,995
As low as $454.83/mo
View Details
Jet GH-1440-1 Lathe with Newall DP700 DRO and Taper Attachment 323384 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall DP700 DRO and Taper Attachment 323384
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Gearbox provides larger threading and feed capabilities with no gear changes
  • Inch-metric dials are standard
MSRP: $36,857.09
$28,805
As low as $570.05/mo
View Details
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894308 at Elite Metal Tools
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894308
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,068.59
$30,399
As low as $601.59/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds 894361 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds 894361
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,051.39
$31,110
As low as $615.66/mo
View Details
Jet JET — Heat Resistant Dust Collection Hose, 4 in dia x 2.5M length, Max 180 degrees 414715 at Elite Metal Tools
Jet JET — Heat Resistant Dust Collection Hose, 4 in dia x 2.5M length, Max 180 degrees 414715
  • Flexible
  • For temperatures up to 180 degrees F
  • 2.5M length
  • Hose dia 4 in.
MSRP: $577.39
$545
As low as $17.71/mo
View Details
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP500 2-Axis DRO 351162 at Elite Metal Tools
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP500 2-Axis DRO 351162
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $12,899.99
$9,999
As low as $324.96/mo
View Details
Jet E-1340VS With Taper Attachment and Collet Closer 892402 at Elite Metal Tools
Jet E-1340VS With Taper Attachment and Collet Closer 892402
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $30,837.09
$24,475
As low as $484.36/mo
View Details
Jet JET —6 in Riser Block for JTM-1/2/4VS Mill 350090 at Elite Metal Tools
Jet JET —6 in Riser Block for JTM-1/2/4VS Mill 350090
  • Adds 6" height capacity
  • Includes all mounting hardware
  • Specially designed for each model
MSRP: $1,066.39
$935
As low as $30.38/mo
View Details
Jet JET — Replacement Blade,-1" x .035" x 130" x 8/12VT for HBS-1018W 414310 at Elite Metal Tools
Jet JET — Replacement Blade,-1" x .035" x 130" x 8/12VT for HBS-1018W 414310
  • Carbon steel
  • 8/12VT
  • 1" x .035" x 130"
$175
View Details
Jet JET — Taper Attachment Kit for 14 in ZX Series Lathes 321291 at Elite Metal Tools
Jet JET — Taper Attachment Kit for 14 in ZX Series Lathes 321291
  • 10° Inclusive cutting capacity
  • Mounts to predrilled and tapped holes
  • Specially designed for each model
  • 26.6 x 12.7 x 9.8 in
  • Attachment length 18 in
MSRP: $5,651.39
$4,455
As low as $144.78/mo
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-460-020 144009 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-460-020 144009
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,172.99
$7,345
As low as $238.71/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894313 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894313
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,017.09
$32,525
As low as $643.66/mo
View Details
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690619 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Acu-Rite 203 DRO With X-Axis Powerfeed 690619
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,117.09
$22,495
As low as $445.17/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.