JET

  • Layout
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 114-1/2" (5/8T) for EHB-8VS/M 891091 at Elite Metal Tools
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 114-1/2" (5/8T) for EHB-8VS/M 891091
  • Bimetal
  • 5/8T
  • 1" X .035" X 114-1/2"
MSRP: $245.95
$237
View Details
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 3/4T 413404 at Elite Metal Tools
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 3/4T 413404
  • Replacement Blade for Jet Saws
  • Shop the Jet store for all your replacement part needs
MSRP: $540.53
$525
As low as $17.06/mo
View Details
Jet 1-Ton Hand Chain Hoist with 20' Lift | S90-100-20 101912 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 20' Lift | S90-100-20 101912
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $492.79
$313.50
View Details
Jet JTM-4VS Mill With X and Y-Axis Powerfeeds With Power Draw Bar 690009 at Elite Metal Tools
Jet JTM-4VS Mill With X and Y-Axis Powerfeeds With Power Draw Bar 690009
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,677.07
$20,390
As low as $403.51/mo
View Details
Jet JCT-2610, 11" Rivet Buster 550610 at Elite Metal Tools
Jet JCT-2610, 11" Rivet Buster 550610
  • Ergonomic Drop Forged "D" Style handle
  • Heat treated steel barrel for increased durability
  • Heavy-Duty, industry proven valve design
  • Ideal for busting large rivets or concrete demolition
  • Positive retention of piston for increased user safety
MSRP: $2,952.40
$1,741
As low as $56.58/mo
View Details
Jet JTM-4VS Mill With Air Powered Draw Bar 690119 at Elite Metal Tools
Jet JTM-4VS Mill With Air Powered Draw Bar 690119
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,541.72
$16,114
As low as $318.89/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds 690542 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds 690542
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $33,109.99
$26,669
As low as $527.77/mo
View Details
Jet JET — Infeed/Outfeed Tables for JET JWDS1632/1836 Sanders 723521 at Elite Metal Tools
Jet JET — Infeed/Outfeed Tables for JET JWDS1632/1836 Sanders 723521
  • Extends table surface to 40"
  • Includes both tables and all needed hardware
  • Each table measures 18 x 10-1/4 in
  • Steel
  • Installation hardware included
$225
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894348 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894348
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $49,462.26
$39,841
As low as $788.45/mo
View Details
Jet 6-Piece Premium R8 Collet Set CS-R8 650132 at Elite Metal Tools
Jet 6-Piece Premium R8 Collet Set CS-R8 650132
  • Precision hardened and ground collets
  • Premium collets with 0.0005mm T.I.R.
  • R-8 collets for use with milling machines
  • 1/8" to 3/4" by 1/8ths
  • Precision ground components
MSRP: $228.35
$215
View Details
Jet E-1340VS With ACU-RITE 303 DRO 892411 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO 892411
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $33,380.26
$26,868
As low as $531.71/mo
View Details
Jet BDB-919 STAND 321375 at Elite Metal Tools
Jet BDB-919 STAND 321375
  • Hinged doors to store supplies
  • Sturdy steel metal stand built to fit the JET BDB-919 lathe
MSRP: $743.26
$659
As low as $21.41/mo
View Details
Jet 12" Faceplate D1-6 For Elite 17" Geared Head Lathes 892155 at Elite Metal Tools
Jet 12" Faceplate D1-6 For Elite 17" Geared Head Lathes 892155
  • Cast iron construction
  • Rectangular, square and irregular shape materials can be mounted
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
MSRP: $837.86
$775
As low as $25.18/mo
View Details
Jet J-CK350-2K, 350mm Non-Ferrous High Speed Manual Cold Saw 414203K at Elite Metal Tools
Jet J-CK350-2K, 350mm Non-Ferrous High Speed Manual Cold Saw 414203K
  • 30" adjustable length material stop
  • Double self-centering vise with adjustable gibs secures the material for burr free cuts
  • High-Speed NF-350mm Blade included
  • Pneumatic Mist Coolant System
  • Spring loaded whole hand trigger starts or stops the sawing process for easy smooth cutting and increased user safety
MSRP: $11,351.99
$8,999
As low as $292.46/mo
View Details
Jet 3SS-3C-20, 3-Ton Electric Chain Hoist 3-Phase 20' Lift 332000 at Elite Metal Tools
Jet 3SS-3C-20, 3-Ton Electric Chain Hoist 3-Phase 20' Lift 332000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $9,931.89
$5,607
As low as $182.22/mo
View Details
Jet J-4421-4, 20" Disc Grinder 460V 3Ph 577011 at Elite Metal Tools
Jet J-4421-4, 20" Disc Grinder 460V 3Ph 577011
  • Extra large tilting table
  • Extra large tilting table lowers completely below disc for use of the entire disc surface
  • Low voltage protection switch
  • Precision table raiser utilizes a rack and gear mechanism for effortless operation
  • Rigid column and heavy duty base
MSRP: $5,135.45
$4,179
As low as $135.81/mo
View Details
Jet JTM-2 Mill With Newall DP500 DRO 692193 at Elite Metal Tools
Jet JTM-2 Mill With Newall DP500 DRO 692193
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $19,257.80
$15,171
As low as $300.23/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894367 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894367
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,543.07
$35,805
As low as $708.58/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894398 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894398
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $51,624.53
$41,430
As low as $819.89/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894338 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894338
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,056.53
$34,713
As low as $686.97/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894150 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894150
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,489.07
$37,657
As low as $745.23/mo
View Details
Jet EGH-1740 With Newall DP700 DRO With Collet Closer 892513 at Elite Metal Tools
Jet EGH-1740 With Newall DP700 DRO With Collet Closer 892513
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $61,354.80
$48,580
As low as $961.39/mo
View Details
Jet ETM-949EVS Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894090 at Elite Metal Tools
Jet ETM-949EVS Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894090
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $75,544.80
$58,999
As low as $1,167.59/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment, 3HP 311441 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment, 3HP 311441
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $27,569.07
$21,780
As low as $431.02/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.