JET

  • Layout
Jet JET — Replacement Blade,-1" x .035" x 130" x 4/6VT for HBS-1018W 414308 at Elite Metal Tools
Jet JET — Replacement Blade,-1" x .035" x 130" x 4/6VT for HBS-1018W 414308
  • Carbon steel
  • 4/6VT
  • 1" x .035" x 130"
$175
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment & Collet Closer,3HP 311443 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment & Collet Closer,3HP 311443
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $28,994.29
$22,350
As low as $442.30/mo
View Details
Jet JTM-2 Mill With X and Y-Axis Powerfeeds 690017 at Elite Metal Tools
Jet JTM-2 Mill With X and Y-Axis Powerfeeds 690017
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $17,077.09
$13,195
As low as $428.83/mo
View Details
Jet ETM-949 Mill With 3-Axis ACU-RITE MILLPWR G2 CNC 894041 at Elite Metal Tools
Jet ETM-949 Mill With 3-Axis ACU-RITE MILLPWR G2 CNC 894041
  • Patented vari-disc key provides up to 10 times the wear resistance than aluminum or brass keys
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
MSRP: $78,014.29
$59,545
As low as $1,178.39/mo
View Details
Jet JET — 35-Piece Premium 5C Collet Set with Rack 650016 at Elite Metal Tools
Jet JET — 35-Piece Premium 5C Collet Set with Rack 650016
  • 35 collets
  • 1/16 to 1-1/8 by 16ths
  • Metal rack
  • Precision ground components
MSRP: $810.79
$745
As low as $24.21/mo
View Details
Jet JET — RF Remote Control for Dust Collector, 115V 708636C at Elite Metal Tools
Jet JET — RF Remote Control for Dust Collector, 115V 708636C
  • Complete unit
  • Simply plug in your dust collector to the transmitter for instant remote control, no wiring needed
  • Works with all Dust Collection units 1-3/4 HP and smaller (115V ONLY)
$155
View Details
Jet JVM-836-3 Mill With X and Y-Axis Powerfeeds 690175 at Elite Metal Tools
Jet JVM-836-3 Mill With X and Y-Axis Powerfeeds 690175
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $15,148.29
$11,649
As low as $378.59/mo
View Details
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 3/4T 413404 at Elite Metal Tools
Jet JET — Replacement Blade, 1-5/16" x 0.043" x 155-1/2 3/4T 413404
  • Replacement Blade for Jet Saws
  • Shop the Jet store for all your replacement part needs
$489
View Details
Jet GH-1440B with Taper Attachment 323442 at Elite Metal Tools
Jet GH-1440B with Taper Attachment 323442
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $21,868.59
$16,730
As low as $331.08/mo
View Details
Jet JET — 52 Piece CK12 Clamping Kit for 5/8 in T-Slots 660012 at Elite Metal Tools
Jet JET — 52 Piece CK12 Clamping Kit for 5/8 in T-Slots 660012
  • 58-pc Clamping Kit with Tray for 5/8" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
MSRP: $224.79
$215
View Details
Jet JTM-4VS Mill With Acu-Rite 203 DRO With X, Y & Z-Axis Powerfeeds With Air Powered Draw Bar 690231 at Elite Metal Tools
Jet JTM-4VS Mill With Acu-Rite 203 DRO With X, Y & Z-Axis Powerfeeds With Air Powered Draw Bar 690231
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $27,642.79
$21,395
As low as $423.40/mo
View Details
Jet JET — Coolant System with Motor and Tray for JTM949EVS and JTM1050EVS Mills 660125 at Elite Metal Tools
Jet JET — Coolant System with Motor and Tray for JTM949EVS and JTM1050EVS Mills 660125
MSRP: $782.59
$725
As low as $23.56/mo
View Details
Jet PT-2048JB, 20" x 48" 5,500 LB Capacity Pallet Truck 161006 at Elite Metal Tools
Jet PT-2048JB, 20" x 48" 5,500 LB Capacity Pallet Truck 161006
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $1,010.99
$659
As low as $21.41/mo
View Details
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds 894307 at Elite Metal Tools
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds 894307
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,874.29
$28,099
As low as $556.07/mo
View Details
Jet 6-Piece Premium R8 Collet Set CS-R8 650132 at Elite Metal Tools
Jet 6-Piece Premium R8 Collet Set CS-R8 650132
  • Precision hardened and ground collets
  • Premium collets with 0.0005mm T.I.R.
  • R-8 collets for use with milling machines
  • 1/8" to 3/4" by 1/8ths
  • Precision ground components
$210
View Details
Jet 15-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1500WO-30 109130 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-1500WO-30 109130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $9,457.99
$5,249
As low as $170.59/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed 894359 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed 894359
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,085.69
$29,690
As low as $587.56/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894332 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894332
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,157.09
$31,899
As low as $631.28/mo
View Details
Jet JCT-2612, 6" Rivet Buster 550612 at Elite Metal Tools
Jet JCT-2612, 6" Rivet Buster 550612
  • Ergonomic Drop Forged "D" Style handle
  • Heat treated steel barrel for increased durability
  • Heavy-Duty, industry proven valve design
  • Ideal for busting large rivets or concrete demolition
  • Positive retention of piston for increased user safety
MSRP: $2,209.99
$1,345
As low as $43.71/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds 690542 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds 690542
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $30,099.99
$23,195
As low as $459.02/mo
View Details
Jet JTM-1050 MILL W/DP700, X&Z POWERFEEDS 692206 at Elite Metal Tools
Jet JTM-1050 MILL W/DP700, X&Z POWERFEEDS 692206
MSRP: $29,854.29
$22,975
As low as $454.67/mo
View Details
Jet EVS-949 Mill with Z-Axis JET Powerfeed 894302 at Elite Metal Tools
Jet EVS-949 Mill with Z-Axis JET Powerfeed 894302
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,557.09
$25,715
As low as $508.89/mo
View Details
Jet 12" Faceplate D1-6 For Elite 17" Geared Head Lathes 892155 at Elite Metal Tools
Jet 12" Faceplate D1-6 For Elite 17" Geared Head Lathes 892155
  • Cast iron construction
  • Rectangular, square and irregular shape materials can be mounted
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
MSRP: $761.69
$685
As low as $22.26/mo
View Details
Jet J-4421-4, 20" Disc Grinder 460V 3Ph 577011 at Elite Metal Tools
Jet J-4421-4, 20" Disc Grinder 460V 3Ph 577011
  • Extra large tilting table
  • Extra large tilting table lowers completely below disc for use of the entire disc surface
  • Low voltage protection switch
  • Precision table raiser utilizes a rack and gear mechanism for effortless operation
  • Rigid column and heavy duty base
MSRP: $4,668.59
$3,755
As low as $122.03/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.