JET

  • Layout
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X-Axis Powerfeed 894405 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and Servo X-Axis Powerfeed 894405
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,034.29
$31,815
As low as $629.61/mo
View Details
Jet JTM-2 Mill With Newall DP500 DRO 692193 at Elite Metal Tools
Jet JTM-2 Mill With Newall DP500 DRO 692193
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $17,507.09
$13,495
As low as $438.58/mo
View Details
Jet JET — 13GH/BD Taper Attachment for 13 x 40 A Lathes 321442 at Elite Metal Tools
Jet JET — 13GH/BD Taper Attachment for 13 x 40 A Lathes 321442
  • 10° Inclusive cutting capacity
  • Mounts to predrilled and tapped holes
MSRP: $4,054.29
$3,249
As low as $105.59/mo
View Details
Jet Spider for 2" Spindle Bore 650226 at Elite Metal Tools
Jet Spider for 2" Spindle Bore 650226
  • Gun-smithing spider adds functionality to the JET GH-1440B lathe
$210
View Details
Jet Jet JWS-10 10" 220 Grit Aluminum Oxide Grinding Wheel 727022 at Elite Metal Tools
Jet Jet JWS-10 10" 220 Grit Aluminum Oxide Grinding Wheel 727022
  • Jet 220 Grit Aluminum Oxide Grinding Wheel
  • 10in. 220 Grit
  • Perfect for sharpening woodworking tools
  • Designed for the Jet JWS-10 Variable Speed Wet Sharpener
$215
View Details
Jet JTM-1050 MILL W/DP700, X&Z POWERFEEDS 692206 at Elite Metal Tools
Jet JTM-1050 MILL W/DP700, X&Z POWERFEEDS 692206
MSRP: $29,854.29
$22,975
As low as $454.67/mo
View Details
Jet JET — 5 Gallon MW Biodegradable Coolant (Pail) 414127 at Elite Metal Tools
Jet JET — 5 Gallon MW Biodegradable Coolant (Pail) 414127
  • Environmentally friendly
  • Excellent coolant and heat transfer
  • Non-flammable
  • Superior fluid stability
  • Longer tool life
MSRP: $251.79
$240
View Details
Jet JET — CCS-1 Mill Chuck and Collet Set 466001 at Elite Metal Tools
Jet JET — CCS-1 Mill Chuck and Collet Set 466001
  • Includes 15 precious spring collets in 1/16" increments from 1/8" to 1"
  • T.I.R. at 2-3/8" is 0.0008"
  • Shank taper R-8
  • Spring collets replace 15 individual adapters
  • With wooden case and spanner wrenches
MSRP: $945.99
$845
As low as $27.46/mo
View Details
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351159 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351159
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $13,723.09
$10,595
As low as $344.33/mo
View Details
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP500 2-Axis DRO & X-Axis Powerfeed 351161 at Elite Metal Tools
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed with DP500 2-Axis DRO & X-Axis Powerfeed 351161
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $14,742.79
$11,355
As low as $369.03/mo
View Details
Jet JTM-4VS Mill With Acu-Rite 203 DRO With X, Y & Z-Axis Powerfeeds With Air Powered Draw Bar 690231 at Elite Metal Tools
Jet JTM-4VS Mill With Acu-Rite 203 DRO With X, Y & Z-Axis Powerfeeds With Air Powered Draw Bar 690231
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $27,642.79
$21,395
As low as $423.40/mo
View Details
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds 894307 at Elite Metal Tools
Jet EVS-949 Mill with X, Y, Z-Axis JET Powerfeeds 894307
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,874.29
$28,099
As low as $556.07/mo
View Details
Jet GHB-1340A Lathe With Newall NMS300 DRO With Taper Attachment and Collet Closer 323104 at Elite Metal Tools
Jet GHB-1340A Lathe With Newall NMS300 DRO With Taper Attachment and Collet Closer 323104
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $22,974.29
$17,529
As low as $346.89/mo
View Details
Jet JTM-4VS Mill With X and Y-Axis Powerfeeds 690008 at Elite Metal Tools
Jet JTM-4VS Mill With X and Y-Axis Powerfeeds 690008
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $19,325.39
$14,895
As low as $484.08/mo
View Details
Jet GH-1440-1 Lathe with Collet Closer 323372 at Elite Metal Tools
Jet GH-1440-1 Lathe with Collet Closer 323372
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $28,871.39
$22,259
As low as $440.50/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Collet Closer, 3HP 311449 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Collet Closer, 3HP 311449
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $28,502.79
$21,995
As low as $435.28/mo
View Details
Jet AHJ-12, 12-Ton Air / Hydraulic Bottle Jack 456612 at Elite Metal Tools
Jet AHJ-12, 12-Ton Air / Hydraulic Bottle Jack 456612
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Labor saving air pump that connects to a pneumatic source for increased lifting speed
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
MSRP: $648.99
$465
View Details
Jet SLT-1650, Scissor Lift Table 140779 at Elite Metal Tools
Jet SLT-1650, Scissor Lift Table 140779
  • All steel design of frame and table permit the transport of heavy materials
  • Easy-To-Use Hydraulic Foot Pump
  • Easy-to-use hydraulic foot pump for precision raising and lowering of table
  • Fixed rear wheels feature parking brakes for added safety
  • Overload Protection ball valve prevents lifting loads past maximum capacity
MSRP: $2,026.99
$1,215
As low as $39.48/mo
View Details
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300 at Elite Metal Tools
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,557.09
$25,715
As low as $508.89/mo
View Details
Jet JTM-1254RVS with 3-Axis ACU-RITE G-2 MILLPOWER CNC 691944 at Elite Metal Tools
Jet JTM-1254RVS with 3-Axis ACU-RITE G-2 MILLPOWER CNC 691944
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • 3-D Contouring, ability to import and run G-code files from CAD/CAM programs
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Available offline software
MSRP: $64,499.99
$49,825
As low as $986.03/mo
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS200-010 104044 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS200-010 104044
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $13,162.99
$7,340
As low as $238.55/mo
View Details
Jet GH-1440-1 Lathe with Taper Attachment 323371 at Elite Metal Tools
Jet GH-1440-1 Lathe with Taper Attachment 323371
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $33,417.09
$26,330
As low as $521.07/mo
View Details
Jet JHJ-12-1/2, 12-1/2-Ton Hydraulic Bottle Jack 453312 at Elite Metal Tools
Jet JHJ-12-1/2, 12-1/2-Ton Hydraulic Bottle Jack 453312
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $260.99
$195
View Details
Jet J-CK350-2K, 350mm Non-Ferrous High Speed Manual Cold Saw 414203K at Elite Metal Tools
Jet J-CK350-2K, 350mm Non-Ferrous High Speed Manual Cold Saw 414203K
  • 30" adjustable length material stop
  • Double self-centering vise with adjustable gibs secures the material for burr free cuts
  • High-Speed NF-350mm Blade included
  • Pneumatic Mist Coolant System
  • Spring loaded whole hand trigger starts or stops the sawing process for easy smooth cutting and increased user safety
MSRP: $10,319.99
$8,025
As low as $260.81/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.