Category
Country of Origin

JET

Jet J-3130, 5" x 8" Horizontal Bandsaw 414461 at Elite Metal Tools
Jet J-3130, 5" x 8" Horizontal Bandsaw 414461
  • Adjustable blade guides with side eccentric shaft with ball bearings with rear-ball bearings
  • Adjustable Material Stop
  • Blade drive is a steel, heat treated worm driving a bronze worm gear in an oil bath
  • Blade guides with side eccentric shaft with ball bearings
  • Fully adjustable hydraulic downfeed system
MSRP: $1,959.53
$1,635
As low as $53.13/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds 894326 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds 894326
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,786.26
$33,978
As low as $672.42/mo
View Details
Jet EGH-1740 With Taper Attachment and Collet Closer 892502 at Elite Metal Tools
Jet EGH-1740 With Taper Attachment and Collet Closer 892502
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $59,597.99
$46,554
As low as $921.30/mo
View Details
Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO and X-Axis Table Powerfeed 350120 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO and X-Axis Table Powerfeed 350120
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $12,027.72
$9,415
As low as $305.98/mo
View Details
Jet Parallel Clamp Framing Kit (2 - 24 x 40) 70411 at Elite Metal Tools
Jet Parallel Clamp Framing Kit (2 - 24 x 40) 70411
  • 2" Bench Dogs can be used to maximize clamp stability anywhere and their aluminum design makes them built for extended durability and stability
  • Acme threaded handle turns easily and applies continuous pressure
  • Cross Doc™ framing blocks can be used for gluing rectangular frames at four points safely and securely
  • Ergonomic SUMOGRIP® handles integrated with soft grip for added comfort and increased torque
  • Four mounting holes guarantee a permanent setup
MSRP: $698.83
$500
As low as $16.25/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351146 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351146
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $11,662.85
$9,175
As low as $298.18/mo
View Details
Jet ETM-949 Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894040 at Elite Metal Tools
Jet ETM-949 Mill With 2-Axis ACU-RITE MILLPWR G2 CNC 894040
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $74,869.07
$57,600
As low as $1,139.90/mo
View Details
On Sale
Jet GH-1440-1 Lathe with Collet Closer 323372 at Elite Metal Tools
Jet GH-1440-1 Lathe with Collet Closer 323372
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $31,758.53
$25,278
As low as $500.25/mo
View Details
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500 at Elite Metal Tools
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $7,384.29
$4,270
As low as $138.77/mo
View Details
Jet 20-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-2000WO-15 108015 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-2000WO-15 108015
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $10,216.79
$5,779
As low as $187.81/mo
View Details
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300 at Elite Metal Tools
Jet EVS-949 Mill with X-Axis JET Powerfeed 894300
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,812.80
$28,210
As low as $558.27/mo
View Details
Jet SJ-20T, 20-Ton Screw Jack 441320 at Elite Metal Tools
Jet SJ-20T, 20-Ton Screw Jack 441320
  • Complies with ANSI/ASME B30.1 standards
  • Corrugated Pivoting Head
  • Corrugated pivoting head, contours to the load providing maximum surface contact
  • Heavy-duty cast bell shaped base provides a stable foundation in multiple lifting environments
  • Improved design requires less effort to lift a maximum capacity load
MSRP: $445.49
$296
View Details
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $12,906.07
$10,052
As low as $326.69/mo
View Details
Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO 350402 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With ACU-RITE 203 DRO 350402
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $10,135.72
$7,905
As low as $256.91/mo
View Details
Jet JET — V-Roller Stationary Material Support Stand 414122 at Elite Metal Tools
Jet JET — V-Roller Stationary Material Support Stand 414122
  • Heavy-duty cast iron and steel construction with chrome-plated ball bearing roller heads
  • Height adjusts from 23" to 38.5".
  • Locking screws for added safety
  • Roller heads are interchangeable
  • Gray
MSRP: $324.27
$302
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Taper Attachment, 3HP 311450 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO and Taper Attachment, 3HP 311450
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $30,947.72
$24,690
As low as $488.61/mo
View Details
On Sale
Jet CS-275, 275mm 1-Phase Ferrous Manual Cold Saw 414228 at Elite Metal Tools
Jet CS-275, 275mm 1-Phase Ferrous Manual Cold Saw 414228
  • 275mm (10") Ferrous Cold Saw for steel, stainless and tough to cut alloys
  • Blade drive reduction gearbox operates in an oil bath for increased durability
  • Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
  • Fully adjustable material depth stop for sawing repeatability and increased production
  • Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade
MSRP: $4,459.72
Was: $3,599
Now: $2,915.19
As low as $94.74/mo
View Details
Jet Closed Stand with Casters for JSG-6 6" x 48" / 12" Disc Sander - (708598) 708598 at Elite Metal Tools
Jet Closed Stand with Casters for JSG-6 6" x 48" / 12" Disc Sander - (708598) 708598
MSRP: $689.25
$643
As low as $20.89/mo
View Details
Jet JET — Replacement Blade,-1" x .035" x 130" x 4/6VT for HBS-1018W 414308 at Elite Metal Tools
Jet JET — Replacement Blade,-1" x .035" x 130" x 4/6VT for HBS-1018W 414308
  • Carbon steel
  • 4/6VT
  • 1" x .035" x 130"
$192
View Details
On Sale
Jet ETM-949, Elite 9x49 Variable Speed Mill 894010 at Elite Metal Tools
Jet ETM-949, Elite 9x49 Variable Speed Mill 894010
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $29,055.72
Was: $22,517
Now: $13,059.86
As low as $258.45/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894328 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894328
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,678.26
$35,346
As low as $699.49/mo
View Details
Jet 5C Lever Type Collet Closer For ELITE E-1236VS Lathe 892006 at Elite Metal Tools
Jet 5C Lever Type Collet Closer For ELITE E-1236VS Lathe 892006
  • Precision ground components
  • Rear mounted lever action
  • Some drilling and other modifications may be required for installation
  • Specifically designed for Elite E-1236VS Lathes
MSRP: $3,783.99
$3,034
As low as $98.60/mo
View Details
Jet 5SS-1C-15, 5-Ton Electric Chain Hoist 1-Phase 15' Lift 511500 at Elite Metal Tools
Jet 5SS-1C-15, 5-Ton Electric Chain Hoist 1-Phase 15' Lift 511500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $12,315.59
$6,935
As low as $225.38/mo
View Details
Jet JET Woodturning Carbide Chisels 6 Piece Set - (719901) 719901 at Elite Metal Tools
Jet JET Woodturning Carbide Chisels 6 Piece Set - (719901) 719901
  • JET Carbide Turning Tool Set includes 4 interchangeable cutting blades: Square (11mm), Square Arc (11mm), Round (12mm), and Diamond (28mm).
  • Light weight extendable anodized aluminum handle. Main handle is 11" with a 10.5" extension.
  • JET Carbide Turning Tool Set is packed in a custom wood case.
  • Stainless steel shaft will not rust
  • Carbide blades have a long cutting life
MSRP: $324.27
$295
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.