JET

  • Layout
Jet EVS-949 Mill with ACU-RITE 203 DRO and X, Y, Z-Axis Powerfeeds and Air Powered Draw Bar 894315 at Elite Metal Tools
Jet EVS-949 Mill with ACU-RITE 203 DRO and X, Y, Z-Axis Powerfeeds and Air Powered Draw Bar 894315
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,491.39
$35,399.99
As low as $700.56/mo
View Details
Jet JHJ-22-1/2, 22-1/2-Ton Hydraulic Bottle Jack 453322 at Elite Metal Tools
Jet JHJ-22-1/2, 22-1/2-Ton Hydraulic Bottle Jack 453322
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $365.99
$255
View Details
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515 at Elite Metal Tools
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $782.99
$530
As low as $17.22/mo
View Details
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500 at Elite Metal Tools
Jet 2SS-3C-15, 2-Ton Electric Chain Hoist 3-Phase 15' Lift 231500
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $6,712.99
$3,845
As low as $124.96/mo
View Details
Jet JET — Heat Resistant Dust Collection Hose, 2 in dia x 8 ft length, max 130 degrees 414730 at Elite Metal Tools
Jet JET — Heat Resistant Dust Collection Hose, 2 in dia x 8 ft length, max 130 degrees 414730
  • Flexible
  • For temperatures up to 130 degrees F
  • 8 ft length
  • Hose dia 2 in.
MSRP: $356.29
$315
View Details
Jet SLT-660F, Scissor Lift Table With Folding Handle 140777 at Elite Metal Tools
Jet SLT-660F, Scissor Lift Table With Folding Handle 140777
  • All steel design of frame and table permit the transport of heavy materials
  • Easy-To-Use Hydraulic Foot Pump
  • Easy-to-use hydraulic foot pump for precision raising and lowering of table
  • Fixed rear wheels feature parking brakes for added safety
  • Fold-down handle for easy storage
MSRP: $1,277.99
$795
As low as $25.83/mo
View Details
Jet JTM-4VS-1 Mill With X and Y-Axis Powerfeeds 690197 at Elite Metal Tools
Jet JTM-4VS-1 Mill With X and Y-Axis Powerfeeds 690197
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $19,657.09
$15,140
As low as $299.62/mo
View Details
Jet 8 x 13 Variable Speed Bandsaw | EHB-8VS 891015 at Elite Metal Tools
Jet 8 x 13 Variable Speed Bandsaw | EHB-8VS 891015
  • Adjustable Material Stop
  • Automatic blade shut off switch stops the sawing process
  • Built-in, self-propelled chip brush prevents chip build up in blade guides
  • Integrated pressurized wash hose for easy machine cleaning
  • Large handwheel with blade tensioning gauge accurately measures blade pressure
MSRP: $7,985.69
$6,319
As low as $205.36/mo
View Details
Jet JVM-836-1 Mill With ACU-RITE 203 DRO , X and Y Powerfeeds 690162 at Elite Metal Tools
Jet JVM-836-1 Mill With ACU-RITE 203 DRO , X and Y Powerfeeds 690162
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,639.99
$15,849
As low as $313.65/mo
View Details
Jet JET — 12-Piece Mini Turning Tool Kit for BDB-920 Lathes 660215 at Elite Metal Tools
Jet JET — 12-Piece Mini Turning Tool Kit for BDB-920 Lathes 660215
  • Quick-change tool post and 4 holders
  • HSS internal threading tool
  • Mt-2 live center; parting tool with HSS blade
  • 2-pc indexable turning tool (right and left hand)
  • Boring tool
MSRP: $368.59
$325
View Details
Jet JTJ-5ST, 5 Ton Hydraulic Toe Jack 454505 at Elite Metal Tools
Jet JTJ-5ST, 5 Ton Hydraulic Toe Jack 454505
  • Complies with ANSI/ASME B30.1 standards
  • Dual purpose jack designed for low or high clearances increases versatility
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Heat treated piston resists corrosion
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
MSRP: $900.99
$595
As low as $19.33/mo
View Details
Jet Closed Stand For JSG-96 Benchtop Belt / Disc Sander - (708597) 708597 at Elite Metal Tools
Jet Closed Stand For JSG-96 Benchtop Belt / Disc Sander - (708597) 708597
  • Compatible with Jet JSG-96 Sander
  • Shop the Jet store for all your replacement part needs
MSRP: $565.09
$539
As low as $17.51/mo
View Details
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000 at Elite Metal Tools
Jet 2SS-3C-20, 2-Ton Electric Chain Hoist 3-Phase 20' Lift 232000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $6,907.99
$3,945
As low as $128.21/mo
View Details
Jet JET — X-Axis Table Powerfeed for Milling Machines 350194 at Elite Metal Tools
Jet JET — X-Axis Table Powerfeed for Milling Machines 350194
  • 13L x 13W x 14 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,228.59
$1,055
As low as $34.28/mo
View Details
Jet JTM-4VS-1 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690179 at Elite Metal Tools
Jet JTM-4VS-1 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690179
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $22,114.29
$16,910
As low as $334.64/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed 894317 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed 894317
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $37,839.99
$29,515
As low as $584.10/mo
View Details
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351164 at Elite Metal Tools
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351164
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $14,374.29
$11,095
As low as $360.58/mo
View Details
Jet JTM-1254VS with 2-Axis ACU-RITE G-2 MILLPOWER CNC 691940 at Elite Metal Tools
Jet JTM-1254VS with 2-Axis ACU-RITE G-2 MILLPOWER CNC 691940
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
MSRP: $58,971.39
$45,845
As low as $907.27/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO 894351 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO 894351
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $35,751.39
$28,010
As low as $554.31/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894416 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894416
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $49,142.79
$38,775
As low as $767.35/mo
View Details
Jet JET — Flood Coolant System for 2221VS Drill Press 1hp 1 phase 115/220V 5512104 at Elite Metal Tools
Jet JET — Flood Coolant System for 2221VS Drill Press 1hp 1 phase 115/220V 5512104
  • Flood Style
  • 1/8 HP
  • 115/220V, 1Ph
MSRP: $614.29
$585
As low as $19.01/mo
View Details
Jet JHJ-12-1/2L, 12-1/2-Ton Low Profile Hydraulic Bottle Jack 453313K at Elite Metal Tools
Jet JHJ-12-1/2L, 12-1/2-Ton Low Profile Hydraulic Bottle Jack 453313K
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $260.99
$195
View Details
Jet Bed Extension for Jet JWL-20EXT Lathe 719401 at Elite Metal Tools
Jet Bed Extension for Jet JWL-20EXT Lathe 719401
  • Fits JET JWL-1440VS, JWL-1640EVS, JWL-1840EVS and JWL-1840DVR lathes
  • Includes tool rest riser
  • Mounts on the end of the bed to allow 60” between centers or down on the leg to add 18” to the diameter of the workpiece
  • Will not work on the JWL-1442VS or JWL-1642EVS
$455
View Details
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046 at Elite Metal Tools
Jet 2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS200-020 104046
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $14,137.99
$7,840
As low as $254.80/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.