JET

  • Adjustable blade guides that utilizes cam follower bearings mounted on eccentric shafts
  • Adjustable Material Stop
  • Convenient control panel with overload protection
  • Fully adjustable hydraulic downfeed system
  • Heavy-duty cast iron saw head and sturdy base
MSRP: $6,567.87
$5,220
As low as $169.65/mo

  • Heavy duty tables fold for better storage
  • Tables are adjustable to level with precision
  • Tables assist with longer boards
  • Hold up to 35 lbs each
  • Steel
MSRP: $371.57
$328

On Sale
Jet J-4400A, 12" Industrial Disc Finishing Machine 115/230V 1Ph 414602 at Elite Metal Tools
  • Easy to read scale shows exact degree of table tilt
  • Fully machined balanced disc runs vibration free
  • Heavy duty one piece steel stand
  • Large cast iron slotted table
  • Optimum speed of 1960 RPM, which is ideal for both metal and wood finishing
MSRP: $2,500.07
Was: $2,075
Now: $1,203.50
As low as $39.11/mo

  • 4 independent one-piece jaws
  • Cast iron construction
  • Specifically designed for Elite EGH-1740 and EGH-1760 lathes
MSRP: $2,256.86
$1,850
As low as $60.12/mo

  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $49,529.80
$39,891
As low as $789.44/mo

  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,137.72
$35,507
As low as $702.68/mo

  • Adjustable Material Stop
  • Automatic blade shut off switch stops the sawing process
  • Built-in, self-propelled chip brush prevents chip build up in blade guides
  • Dual mitering allows for compound angle cutting of 60° right and 45° left
  • Heavy-duty construction reduces vibration and deflection
MSRP: $19,210.50
$15,136
As low as $299.54/mo

  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $59,597.99
$47,289
As low as $935.84/mo

  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $22,703.99
$17,703
As low as $350.34/mo

  • 3 double-end boring bars (3/8 x 6, 1/2 x 9 and 5/8 x 10)
  • Adjustable turning tool holder
  • HSS knurling tool with 3 pairs of knurls
  • MT3 half dead center and MT3 carbide-tipped dead center
  • MT3 heavy duty live center

  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,786.26
$34,514
As low as $683.03/mo

  • Complete unit
  • Simply plug in your dust collector to the transmitter for instant remote control, no wiring needed
  • Works with all Duct Collectors up to 3 HP (230V ONLY)

  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
MSRP: $13,649.45
$10,799
As low as $350.96/mo

  • 2" Bench Dogs can be used to maximize clamp stability anywhere and their aluminum design makes them built for extended durability and stability
  • Acme threaded handle turns easily and applies continuous pressure
  • Cross Doc™ framing blocks can be used for gluing rectangular frames at four points safely and securely
  • Ergonomic SUMOGRIP® handles integrated with soft grip for added comfort and increased torque
  • Four mounting holes guarantee a permanent setup
$500
As low as $16.25/mo

  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $12,906.07
$10,210
As low as $331.82/mo

  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $7,598.79
$4,383
As low as $142.44/mo

  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $15,811.72
$12,486
As low as $405.79/mo

  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $17,473.93
$13,710
As low as $445.57/mo

  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $10,135.72
$8,075
As low as $262.43/mo

  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $35,137.07
$28,159
As low as $557.26/mo

  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $54,057.07
$43,218
As low as $855.28/mo

  • Reduces air resistance to provide a 10 to 20 percent more CFM than conventional dust collectors
  • Includes a canister filter and 5 clear plastic collection bags
  • Transparent bags make it easy to tell when they are full
  • Designed for the 708640 DC 650A dust collector
$522
As low as $16.96/mo

  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $8,321.49
$4,762
As low as $154.76/mo

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.