JET

  • Layout
Jet JTM-4VS Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds & Air Power Drawbar 690115 at Elite Metal Tools
Jet JTM-4VS Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds & Air Power Drawbar 690115
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $28,244.80
$21,930
As low as $433.99/mo
View Details
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X-Axis Powerfeed and Air Powered Drawbar 690635 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X-Axis Powerfeed and Air Powered Drawbar 690635
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,461.45
$27,233
As low as $538.94/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (Q) DRO, X & Y Powerfeeds 698140 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (Q) DRO, X & Y Powerfeeds 698140
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,704.80
$29,575
As low as $585.28/mo
View Details
Jet 1-1/2-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-150WO-30 201130 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-150WO-30 201130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $1,350.79
$850
As low as $27.62/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894138 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed 894138
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,245.45
$29,950
As low as $592.71/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 690644 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed 690644
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,839.72
$26,060
As low as $515.72/mo
View Details
Jet 1-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-100WO-30 203130 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-100WO-30 203130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $1,009.79
$650
As low as $21.12/mo
View Details
Jet E-1236VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892306 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892306
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $31,893.72
$25,375
As low as $502.17/mo
View Details
Jet E-1236VS With ACU-RITE 303 CSS DRO With Taper Attachment 892316 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 CSS DRO With Taper Attachment 892316
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $30,271.99
$23,397
As low as $463.02/mo
View Details
Jet JTM-1254VS with NEWALL DP700 DRO X & Y Powerfeeds & Air Power Drawbar 698070 at Elite Metal Tools
Jet JTM-1254VS with NEWALL DP700 DRO X & Y Powerfeeds & Air Power Drawbar 698070
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,245.45
$29,970
As low as $593.10/mo
View Details
Jet 1-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-100WO-15 203115 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-100WO-15 203115
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $743.59
$510
As low as $16.57/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698137 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds & Air Power Drawbar 698137
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $42,164.53
$32,805
As low as $649.21/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds 698136 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X, Y & Z Powerfeeds 698136
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $38,650.80
$30,260
As low as $598.84/mo
View Details
Jet JET — Replacement Carbide Circular Saw Blade, 350 x 32 x 3.4mm, 108T for NF- CK350 579064 at Elite Metal Tools
Jet JET — Replacement Carbide Circular Saw Blade, 350 x 32 x 3.4mm, 108T for NF- CK350 579064
  • Carbide tipped cold steel
  • Nonferrous
  • 350 x 32 x 3.4mm
  • 108 teeth
MSRP: $820.26
$745
As low as $24.21/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-275-20 110120 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-275-20 110120
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $4,058.99
$2,361
As low as $76.73/mo
View Details
Jet JCT-3643, 3" Stroke, Hex Shank, Open Handle Chipping Hammer 550643 at Elite Metal Tools
Jet JCT-3643, 3" Stroke, Hex Shank, Open Handle Chipping Hammer 550643
  • Comes with standard type retainer
  • Heat treated cylinder and piston for added durability
  • Heavy-Duty, industry proven valve design
  • Open style forged handle is engineered to dissipate the impact energy more efficiently, reducing user fatigue and increasing safety
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,097.79
$717
As low as $23.30/mo
View Details
Jet E-1236VS With ACU-RITE 203 DRO With Taper Attachment 892304 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 203 DRO With Taper Attachment 892304
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $28,650.26
$22,224
As low as $439.81/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894128 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894128
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,759.07
$32,510
As low as $643.37/mo
View Details
Jet JET — Replacement Circular Saw Blade, Ferrous, 350 x 2.5 x 32mm x 54T for JFK350-2/4K 579047 at Elite Metal Tools
Jet JET — Replacement Circular Saw Blade, Ferrous, 350 x 2.5 x 32mm x 54T for JFK350-2/4K 579047
  • 2 Pin holes are 11mm diameter / 63mm on center
  • 2 Pin holes are 8mm diameter / 45mm on center
  • BLADE DESCRIPTION DEFINITION
  • M2 HSS Steam tempered - 62/64 HRc for ferrous cutting applications
  • The second number is the center hole diameter, 32mm
MSRP: $777.03
$712
As low as $23.14/mo
View Details
Jet JLH-600WO-5 6 Ton Lever Hoist, 5' Lift with Overload Protection 376600 at Elite Metal Tools
Jet JLH-600WO-5 6 Ton Lever Hoist, 5' Lift with Overload Protection 376600
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $2,273.69
$1,395
As low as $45.33/mo
View Details
Jet JLH-300WO-15 3 Ton Lever Hoist, 15' Lift with Overload Protection 376502 at Elite Metal Tools
Jet JLH-300WO-15 3 Ton Lever Hoist, 15' Lift with Overload Protection 376502
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,594.99
$1,006
As low as $32.69/mo
View Details
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds 894154 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds 894154
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $36,488.53
$28,695
As low as $567.87/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690534 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds 690534
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,137.07
$27,721
As low as $548.59/mo
View Details
Jet 2-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-200-15 133215 at Elite Metal Tools
Jet 2-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-200-15 133215
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,161.59
$775
As low as $25.18/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.