JET

  • Layout
Jet JLH-50-15, 1/2-Ton Compact Lever Hoist With 15' Lift 181515 at Elite Metal Tools
Jet JLH-50-15, 1/2-Ton Compact Lever Hoist With 15' Lift 181515
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $585.19
$419
View Details
Jet E-1236VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892322 at Elite Metal Tools
Jet E-1236VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892322
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $31,623.45
$25,180
As low as $498.31/mo
View Details
Jet JLP-075A-20, 3/4 Ton Lever Hoist with 20' Lift 287303 at Elite Metal Tools
Jet JLP-075A-20, 3/4 Ton Lever Hoist with 20' Lift 287303
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $602.79
$429
View Details
Jet 5-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-500-10 133510 at Elite Metal Tools
Jet 5-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-500-10 133510
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $2,062.49
$1,295
As low as $42.08/mo
View Details
Jet JLH-300WO-20 3 Ton Lever Hoist, 20' Lift with Overload Protection 376503 at Elite Metal Tools
Jet JLH-300WO-20 3 Ton Lever Hoist, 20' Lift with Overload Protection 376503
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,774.29
$1,099
As low as $35.71/mo
View Details
Jet 1/4-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-250WO-30 101223 at Elite Metal Tools
Jet 1/4-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-250WO-30 101223
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $835.99
$577.50
As low as $18.76/mo
View Details
Jet JLH-600WO-15 6 Ton Lever Hoist, 15' Lift with Overload Protection 376602 at Elite Metal Tools
Jet JLH-600WO-15 6 Ton Lever Hoist, 15' Lift with Overload Protection 376602
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $2,716.99
$1,619
As low as $52.61/mo
View Details
Jet JTM-1254VS with X & Y Powerfeeds 698027 at Elite Metal Tools
Jet JTM-1254VS with X & Y Powerfeeds 698027
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $31,555.80
$25,131
As low as $497.34/mo
View Details
Jet JTM-949EVS with Newall DP700 DRO X,Y & Z Powerfeeds 690539 at Elite Metal Tools
Jet JTM-949EVS with Newall DP700 DRO X,Y & Z Powerfeeds 690539
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,123.53
$26,988
As low as $534.09/mo
View Details
Jet JLH-100WO-20 1 Ton Lever Hoist, 20' Lift with Overload Protection 376203 at Elite Metal Tools
Jet JLH-100WO-20 1 Ton Lever Hoist, 20' Lift with Overload Protection 376203
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $904.19
$599
As low as $19.46/mo
View Details
Jet JLP-150A-20SH, 1-1/2 Ton Lever Hoist, 20' Lift & Shipyard Hooks 287703 at Elite Metal Tools
Jet JLP-150A-20SH, 1-1/2 Ton Lever Hoist, 20' Lift & Shipyard Hooks 287703
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
  • Secured with Allen screws and lock nuts, the cast-steel safety latches are more durable than stamped steel latches and will not bend out of compliance with lifting regulations
  • The Weston style double ratchet pawl brake design splits the load to opposite sides of the ratchet gear for greater load security and increased safety
MSRP: $831.59
$575
As low as $18.68/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO, X, Y & Z Powerfeeds 698065 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO, X, Y & Z Powerfeeds 698065
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $39,596.80
$30,947
As low as $612.44/mo
View Details
Jet JET — Replacement Circular Saw Blade, Ferrous, 350 x 2.5 x 32mm x 100T for JFK350-2/4K 579043 at Elite Metal Tools
Jet JET — Replacement Circular Saw Blade, Ferrous, 350 x 2.5 x 32mm x 100T for JFK350-2/4K 579043
  • 2 Pin holes are 11mm diameter / 63mm on center
  • 2 Pin holes are 8mm diameter / 45mm on center
  • 100T
  • M2 HSS Steam tempered - 62/64 HRc for ferrous cutting applications
  • The second number is the center hole diameter, 32mm
MSRP: $777.03
$725
As low as $23.56/mo
View Details
Jet JTM-1254RVS with X, Y & Z Powerfeeds & Air Power Drawbar 698089 at Elite Metal Tools
Jet JTM-1254RVS with X, Y & Z Powerfeeds & Air Power Drawbar 698089
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $35,947.99
$28,308
As low as $560.21/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X and Y-Axis Powerfeeds 690256 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X and Y-Axis Powerfeeds 690256
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $29,190.80
$22,595
As low as $447.15/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X Powerfeed & Air Power Drawbar 698056 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (K) DRO, X Powerfeed & Air Power Drawbar 698056
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,704.80
$29,579
As low as $585.36/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894147 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894147
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,731.99
$30,995
As low as $613.39/mo
View Details
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO, X & Y Powerfeeds 698063 at Elite Metal Tools
Jet JTM-1254VS with ACU-RITE 203 3X (Q) DRO, X & Y Powerfeeds 698063
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $37,839.99
$29,676
As low as $587.28/mo
View Details
Jet 2-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-200WO-15 206115 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-200WO-15 206115
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $1,106.59
$721
As low as $23.43/mo
View Details
Jet JLP-300A-15 3 Ton Lever Hoist with 15' Lift 287502 at Elite Metal Tools
Jet JLP-300A-15 3 Ton Lever Hoist with 15' Lift 287502
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $987.79
$631
As low as $20.50/mo
View Details
Jet JLH Series 3/4 Ton Lever Hoist, 20' Lift with Overload Protection 376103 at Elite Metal Tools
Jet JLH Series 3/4 Ton Lever Hoist, 20' Lift with Overload Protection 376103
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $868.99
$588
As low as $19.11/mo
View Details
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X & Y Powerfeeds & Air Power Drawbar 698135 at Elite Metal Tools
Jet JTM-1254RVS with NEWALL DP700 3X (K) DRO, X & Y Powerfeeds & Air Power Drawbar 698135
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $39,191.45
$30,654
As low as $606.64/mo
View Details
Jet JLP-600A-10, 6 Ton Lever Hoist with 10' Lift 287601 at Elite Metal Tools
Jet JLP-600A-10, 6 Ton Lever Hoist with 10' Lift 287601
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $1,630.19
$1,025
As low as $33.31/mo
View Details
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X-Axis Powerfeed 690634 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With Newall DP700 DRO With X-Axis Powerfeed 690634
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $32,434.26
$25,766
As low as $509.90/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.