JET

  • Layout
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds and Air Powered Drawbar 690523 at Elite Metal Tools
Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds and Air Powered Drawbar 690523
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $31,574.29
$24,995
As low as $494.65/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | 1/2SS-1C-20 121200 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | 1/2SS-1C-20 121200
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,390.99
$3,115
As low as $101.23/mo
View Details
Jet 1-1/2-Ton Hand Chain Hoist with 15' Lift | S90-150-15 101921 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 15' Lift | S90-150-15 101921
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $567.99
$415
View Details
Jet JHJ-17-1/2L, 17-1/2-Ton Low Profile Hydraulic Bottle Jack 453318K at Elite Metal Tools
Jet JHJ-17-1/2L, 17-1/2-Ton Low Profile Hydraulic Bottle Jack 453318K
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $357.99
$239
View Details
Jet JET — Replacement Inner Filter for IAFS 3000 Air Filtration Systems 415157 at Elite Metal Tools
Jet JET — Replacement Inner Filter for IAFS 3000 Air Filtration Systems 415157
MSRP: $368.59
$325
View Details
Jet 2-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-200WO-20 206121 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-200WO-20 206121
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $1,102.99
$725
As low as $23.56/mo
View Details
Jet JLP-600A-10, 6 Ton Lever Hoist with 10' Lift 287601 at Elite Metal Tools
Jet JLP-600A-10, 6 Ton Lever Hoist with 10' Lift 287601
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $1,481.99
$925
As low as $30.06/mo
View Details
Jet E-1440VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892464 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892464
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,611.39
$28,630
As low as $566.58/mo
View Details
Jet 3-Ton 5/8" Wire Rope 66 Feet 286529 at Elite Metal Tools
Jet 3-Ton 5/8" Wire Rope 66 Feet 286529
  • 5/8" diameter
MSRP: $375.99
$245
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-550-20 110520 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-550-20 110520
  • Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
  • JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $4,066.99
$2,315
As low as $75.23/mo
View Details
Jet GH-1860ZX With ACU-RITE 303 DRO With Taper Attachment 321591 at Elite Metal Tools
Jet GH-1860ZX With ACU-RITE 303 DRO With Taper Attachment 321591
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $60,199.99
$46,895
As low as $928.05/mo
View Details
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 690540 at Elite Metal Tools
Jet JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed 690540
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $26,905.69
$20,849
As low as $412.60/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698123 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (Q) DRO, X & Y Powerfeeds & Air Power Drawbar 698123
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $36,488.59
$28,595
As low as $565.89/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894171 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894171
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,648.59
$32,255
As low as $638.32/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS025-010 104011 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS025-010 104011
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
MSRP: $6,407.99
$3,625
As low as $117.81/mo
View Details
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds & Air Power Drawbar 698117 at Elite Metal Tools
Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds & Air Power Drawbar 698117
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $35,751.39
$27,995
As low as $554.02/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894169 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894169
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,542.79
$31,460
As low as $622.59/mo
View Details
Jet GH-1640ZX With Newall DP700 DRO With Taper Attachment 321148 at Elite Metal Tools
Jet GH-1640ZX With Newall DP700 DRO With Taper Attachment 321148
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $56,821.39
$44,495
As low as $880.55/mo
View Details
Jet 5-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-500WO-10 107100 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-500WO-10 107100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $1,691.99
$1,039
As low as $33.76/mo
View Details
Jet JLH-900WO-15 9 Ton Lever Hoist, 15' Lift with Overload Protection 376702 at Elite Metal Tools
Jet JLH-900WO-15 9 Ton Lever Hoist, 15' Lift with Overload Protection 376702
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $4,407.99
$2,515
As low as $81.73/mo
View Details
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Quill) 691190 at Elite Metal Tools
Jet JTM-1 Mill With 3-Axis Newall DP700 DRO (Quill) 691190
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $20,394.29
$15,675
As low as $310.20/mo
View Details
Jet JLH-300-10PSH 3 Ton Lever Hoist, 10' Lift with Overload Protection & Shipyard Hooks 376901 at Elite Metal Tools
Jet JLH-300-10PSH 3 Ton Lever Hoist, 10' Lift with Overload Protection & Shipyard Hooks 376901
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,404.99
$875
As low as $28.43/mo
View Details
Jet 1/4-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-250WO-15 101225 at Elite Metal Tools
Jet 1/4-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-250WO-15 101225
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $557.99
$415
View Details
Jet JAT-620, 3/8" Reversible Air Drill 505620 at Elite Metal Tools
Jet JAT-620, 3/8" Reversible Air Drill 505620
  • Impact resistant composite housing reduces tool weight, improving balance and reduces user fatigue
  • Industrial Jacobs’s keyed chuck efficiently transfers torque when needed
  • Rugged, ball-bearing design for durability
  • Sealed ball bearing design keeps out contaminants promoting smooth operation
  • Side-mounted, forward/reverse switch for quick and easy direction changes
MSRP: $333.99
$230
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.